Re: [RFC part2 PATCH 8/9] ACPI / ARM64: Update acpi_register_gsi to register with the core IRQ subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon,  2 Dec 2013 23:44:53 +0800, Hanjun Guo <hanjun.guo@xxxxxxxxxx> wrote:
> This API is similar to DT based irq_of_parse_and_map but does link
> parent/child IRQ controllers. This is tested for primary GIC PPI and GIC SPI
> interrupts and not for secondary child irq controllers.
> 
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
> Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
> ---
>  drivers/acpi/plat/arm-core.c |   36 ++++++++++++++++++++++++++++++++++--
>  1 file changed, 34 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/acpi/plat/arm-core.c b/drivers/acpi/plat/arm-core.c
> index 9cc0208..17c99e1 100644
> --- a/drivers/acpi/plat/arm-core.c
> +++ b/drivers/acpi/plat/arm-core.c
> @@ -90,7 +90,7 @@ enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_GIC;
>  
>  static unsigned int gsi_to_irq(unsigned int gsi)
>  {
> -	int irq = irq_create_mapping(NULL, gsi);
> +	int irq = irq_find_mapping(NULL, gsi);

I suspect this will break FDT users that depend on the old behaviour.

g.

>  
>  	return irq;
>  }
> @@ -407,7 +407,39 @@ EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
>   */
>  int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
>  {
> -	return -1;
> +	unsigned int irq;
> +	unsigned int irq_type;
> + 
> +	/*
> +	 * ACPI have no bindings to indicate SPI or PPI, so we
> +	 * use different mappings from DT in ACPI.
> +	 *
> +	 * For FDT
> +	 * PPI interrupt: in the range [0, 15];
> +	 * SPI interrupt: in the range [0, 987];
> +	 *
> +	 * For ACPI, using identity mapping for hwirq:
> +	 * PPI interrupt: in the range [16, 31];
> +	 * SPI interrupt: in the range [32, 1019];
> +	 */
> +
> +	if (trigger == ACPI_EDGE_SENSITIVE &&
> +				polarity == ACPI_ACTIVE_LOW)
> +		irq_type = IRQ_TYPE_EDGE_FALLING;
> +	else if (trigger == ACPI_EDGE_SENSITIVE &&
> +				polarity == ACPI_ACTIVE_HIGH)
> +		irq_type = IRQ_TYPE_EDGE_RISING;
> +	else if (trigger == ACPI_LEVEL_SENSITIVE &&
> +				polarity == ACPI_ACTIVE_LOW)
> +		irq_type = IRQ_TYPE_LEVEL_LOW;
> +	else if (trigger == ACPI_LEVEL_SENSITIVE &&
> +				polarity == ACPI_ACTIVE_HIGH)
> +		irq_type = IRQ_TYPE_LEVEL_HIGH;
> +	else
> +		irq_type = IRQ_TYPE_NONE;
> +
> +	irq = irq_create_acpi_mapping(gsi, irq_type);
> + 	return irq; 
>  }
>  EXPORT_SYMBOL_GPL(acpi_register_gsi);
>  
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linaro-kernel mailing list
> linaro-kernel@xxxxxxxxxxxxxxxx
> http://lists.linaro.org/mailman/listinfo/linaro-kernel

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux