[PATCH 2/5] net: rfkill: gpio: clean up clock handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use a simple flag to see the state of the clock, and make
the clock available even without a name. Also, get rid of
HAVE_CLK dependency.

Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
 net/rfkill/Kconfig       |  2 +-
 net/rfkill/rfkill-gpio.c | 35 ++++++++---------------------------
 2 files changed, 9 insertions(+), 28 deletions(-)

diff --git a/net/rfkill/Kconfig b/net/rfkill/Kconfig
index 78efe89..4c10e7e 100644
--- a/net/rfkill/Kconfig
+++ b/net/rfkill/Kconfig
@@ -36,7 +36,7 @@ config RFKILL_REGULATOR
 
 config RFKILL_GPIO
 	tristate "GPIO RFKILL driver"
-	depends on RFKILL && GPIOLIB && HAVE_CLK
+	depends on RFKILL && GPIOLIB
 	default n
 	help
 	  If you say yes here you get support of a generic gpio RFKILL
diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
index 0705806..1d104e7 100644
--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
@@ -27,24 +27,13 @@
 
 #include <linux/rfkill-gpio.h>
 
-enum rfkill_gpio_clk_state {
-	UNSPECIFIED = 0,
-	PWR_ENABLED,
-	PWR_DISABLED
-};
-
-#define PWR_CLK_SET(_RF, _EN) \
-	((_RF)->pwr_clk_enabled = (!(_EN) ? PWR_ENABLED : PWR_DISABLED))
-#define PWR_CLK_ENABLED(_RF) ((_RF)->pwr_clk_enabled == PWR_ENABLED)
-#define PWR_CLK_DISABLED(_RF) ((_RF)->pwr_clk_enabled != PWR_ENABLED)
-
 struct rfkill_gpio_data {
 	struct rfkill_gpio_platform_data	*pdata;
 	struct rfkill				*rfkill_dev;
 	char					*reset_name;
 	char					*shutdown_name;
-	enum rfkill_gpio_clk_state		pwr_clk_enabled;
-	struct clk				*pwr_clk;
+	struct clk				*clk;
+	bool					clk_enabled;
 };
 
 static int rfkill_gpio_set_power(void *data, bool blocked)
@@ -56,19 +45,18 @@ static int rfkill_gpio_set_power(void *data, bool blocked)
 			gpio_direction_output(rfkill->pdata->shutdown_gpio, 0);
 		if (gpio_is_valid(rfkill->pdata->reset_gpio))
 			gpio_direction_output(rfkill->pdata->reset_gpio, 0);
-		if (rfkill->pwr_clk && PWR_CLK_ENABLED(rfkill))
-			clk_disable(rfkill->pwr_clk);
+		if (!IS_ERR(rfkill->clk) && rfkill->clk_enabled)
+			clk_disable(rfkill->clk);
 	} else {
-		if (rfkill->pwr_clk && PWR_CLK_DISABLED(rfkill))
-			clk_enable(rfkill->pwr_clk);
+		if (!IS_ERR(rfkill->clk) && !rfkill->clk_enabled)
+			clk_enable(rfkill->clk);
 		if (gpio_is_valid(rfkill->pdata->reset_gpio))
 			gpio_direction_output(rfkill->pdata->reset_gpio, 1);
 		if (gpio_is_valid(rfkill->pdata->shutdown_gpio))
 			gpio_direction_output(rfkill->pdata->shutdown_gpio, 1);
 	}
 
-	if (rfkill->pwr_clk)
-		PWR_CLK_SET(rfkill, blocked);
+	rfkill->clk_enabled = blocked;
 
 	return 0;
 }
@@ -123,14 +111,7 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
 	snprintf(rfkill->reset_name, len + 6 , "%s_reset", pdata->name);
 	snprintf(rfkill->shutdown_name, len + 9, "%s_shutdown", pdata->name);
 
-	if (pdata->power_clk_name) {
-		rfkill->pwr_clk = devm_clk_get(&pdev->dev,
-						pdata->power_clk_name);
-		if (IS_ERR(rfkill->pwr_clk)) {
-			pr_warn("%s: can't find pwr_clk.\n", __func__);
-			return PTR_ERR(rfkill->pwr_clk);
-		}
-	}
+	rfkill->clk = devm_clk_get(&pdev->dev, pdata->power_clk_name);
 
 	if (gpio_is_valid(pdata->reset_gpio)) {
 		ret = devm_gpio_request(&pdev->dev, pdata->reset_gpio,
-- 
1.8.4.rc3

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux