From: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> The e-mail address rjw@xxxxxxx that I have been using for quite some time is going to expire at one point, so replace it with a new one, rjw@xxxxxxxxxxxxx, everywhere in MAINTAINERS and Documentation/ABI. Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> --- Documentation/ABI/testing/sysfs-devices-power | 32 +++++++++++++------------- Documentation/ABI/testing/sysfs-power | 22 ++++++++--------- MAINTAINERS | 12 ++++----- 3 files changed, 33 insertions(+), 33 deletions(-) Index: linux-pm/Documentation/ABI/testing/sysfs-devices-power =================================================================== --- linux-pm.orig/Documentation/ABI/testing/sysfs-devices-power +++ linux-pm/Documentation/ABI/testing/sysfs-devices-power @@ -1,6 +1,6 @@ What: /sys/devices/.../power/ Date: January 2009 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../power directory contains attributes allowing the user space to check and modify some power @@ -8,7 +8,7 @@ Description: What: /sys/devices/.../power/wakeup Date: January 2009 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../power/wakeup attribute allows the user space to check if the device is enabled to wake up the system @@ -34,7 +34,7 @@ Description: What: /sys/devices/.../power/control Date: January 2009 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../power/control attribute allows the user space to control the run-time power management of the device. @@ -53,7 +53,7 @@ Description: What: /sys/devices/.../power/async Date: January 2009 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../async attribute allows the user space to enable or diasble the device's suspend and resume callbacks to @@ -79,7 +79,7 @@ Description: What: /sys/devices/.../power/wakeup_count Date: September 2010 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_count attribute contains the number of signaled wakeup events associated with the device. This @@ -88,7 +88,7 @@ Description: What: /sys/devices/.../power/wakeup_active_count Date: September 2010 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_active_count attribute contains the number of times the processing of wakeup events associated with @@ -98,7 +98,7 @@ Description: What: /sys/devices/.../power/wakeup_abort_count Date: February 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_abort_count attribute contains the number of times the processing of a wakeup event associated with @@ -109,7 +109,7 @@ Description: What: /sys/devices/.../power/wakeup_expire_count Date: February 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_expire_count attribute contains the number of times a wakeup event associated with the device has @@ -119,7 +119,7 @@ Description: What: /sys/devices/.../power/wakeup_active Date: September 2010 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_active attribute contains either 1, or 0, depending on whether or not a wakeup event associated with @@ -129,7 +129,7 @@ Description: What: /sys/devices/.../power/wakeup_total_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_total_time_ms attribute contains the total time of processing wakeup events associated with the @@ -139,7 +139,7 @@ Description: What: /sys/devices/.../power/wakeup_max_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_max_time_ms attribute contains the maximum time of processing a single wakeup event associated @@ -149,7 +149,7 @@ Description: What: /sys/devices/.../power/wakeup_last_time_ms Date: September 2010 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_last_time_ms attribute contains the value of the monotonic clock corresponding to the time of @@ -160,7 +160,7 @@ Description: What: /sys/devices/.../power/wakeup_prevent_sleep_time_ms Date: February 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../wakeup_prevent_sleep_time_ms attribute contains the total time the device has been preventing @@ -189,7 +189,7 @@ Description: What: /sys/devices/.../power/pm_qos_latency_us Date: March 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../power/pm_qos_resume_latency_us attribute contains the PM QoS resume latency limit for the given device, @@ -207,7 +207,7 @@ Description: What: /sys/devices/.../power/pm_qos_no_power_off Date: September 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../power/pm_qos_no_power_off attribute is used for manipulating the PM QoS "no power off" flag. If @@ -222,7 +222,7 @@ Description: What: /sys/devices/.../power/pm_qos_remote_wakeup Date: September 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/devices/.../power/pm_qos_remote_wakeup attribute is used for manipulating the PM QoS "remote wakeup required" Index: linux-pm/MAINTAINERS =================================================================== --- linux-pm.orig/MAINTAINERS +++ linux-pm/MAINTAINERS @@ -237,7 +237,7 @@ F: drivers/platform/x86/acer-wmi.c ACPI M: Len Brown <lenb@xxxxxxxxxx> -M: Rafael J. Wysocki <rjw@xxxxxxx> +M: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> L: linux-acpi@xxxxxxxxxxxxxxx W: http://www.lesswatts.org/projects/acpi/ Q: http://patchwork.kernel.org/project/linux-acpi/list/ @@ -2294,7 +2294,7 @@ S: Maintained F: drivers/net/ethernet/ti/cpmac.c CPU FREQUENCY DRIVERS -M: Rafael J. Wysocki <rjw@xxxxxxx> +M: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> M: Viresh Kumar <viresh.kumar@xxxxxxxxxx> L: cpufreq@xxxxxxxxxxxxxxx L: linux-pm@xxxxxxxxxxxxxxx @@ -2325,7 +2325,7 @@ S: Maintained F: drivers/cpuidle/cpuidle-big_little.c CPUIDLE DRIVERS -M: Rafael J. Wysocki <rjw@xxxxxxx> +M: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> M: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> L: linux-pm@xxxxxxxxxxxxxxx S: Maintained @@ -3547,7 +3547,7 @@ F: fs/freevxfs/ FREEZER M: Pavel Machek <pavel@xxxxxx> -M: "Rafael J. Wysocki" <rjw@xxxxxxx> +M: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx> L: linux-pm@xxxxxxxxxxxxxxx S: Supported F: Documentation/power/freezing-of-tasks.txt @@ -3883,7 +3883,7 @@ F: drivers/video/hgafb.c HIBERNATION (aka Software Suspend, aka swsusp) M: Pavel Machek <pavel@xxxxxx> -M: "Rafael J. Wysocki" <rjw@xxxxxxx> +M: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx> L: linux-pm@xxxxxxxxxxxxxxx S: Supported F: arch/x86/power/ @@ -8082,7 +8082,7 @@ F: drivers/sh/ SUSPEND TO RAM M: Len Brown <len.brown@xxxxxxxxx> M: Pavel Machek <pavel@xxxxxx> -M: "Rafael J. Wysocki" <rjw@xxxxxxx> +M: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx> L: linux-pm@xxxxxxxxxxxxxxx S: Supported F: Documentation/power/ Index: linux-pm/Documentation/ABI/testing/sysfs-power =================================================================== --- linux-pm.orig/Documentation/ABI/testing/sysfs-power +++ linux-pm/Documentation/ABI/testing/sysfs-power @@ -1,6 +1,6 @@ What: /sys/power/ Date: August 2006 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power directory will contain files that will provide a unified interface to the power management @@ -8,7 +8,7 @@ Description: What: /sys/power/state Date: August 2006 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/state file controls the system power state. Reading from this file returns what states are supported, @@ -22,7 +22,7 @@ Description: What: /sys/power/disk Date: September 2006 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/disk file controls the operating mode of the suspend-to-disk mechanism. Reading from this file returns @@ -67,7 +67,7 @@ Description: What: /sys/power/image_size Date: August 2006 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/image_size file controls the size of the image created by the suspend-to-disk mechanism. It can be written a @@ -84,7 +84,7 @@ Description: What: /sys/power/pm_trace Date: August 2006 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/pm_trace file controls the code which saves the last PM event point in the RTC across reboots, so that you can @@ -133,7 +133,7 @@ Description: What: /sys/power/pm_async Date: January 2009 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/pm_async file controls the switch allowing the user space to enable or disable asynchronous suspend and resume @@ -146,7 +146,7 @@ Description: What: /sys/power/wakeup_count Date: July 2010 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/wakeup_count file allows user space to put the system into a sleep state while taking into account the @@ -161,7 +161,7 @@ Description: What: /sys/power/reserved_size Date: May 2011 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/reserved_size file allows user space to control the amount of memory reserved for allocations made by device @@ -175,7 +175,7 @@ Description: What: /sys/power/autosleep Date: April 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/autosleep file can be written one of the strings returned by reads from /sys/power/state. If that happens, a @@ -192,7 +192,7 @@ Description: What: /sys/power/wake_lock Date: February 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/wake_lock file allows user space to create wakeup source objects and activate them on demand (if one of @@ -219,7 +219,7 @@ Description: What: /sys/power/wake_unlock Date: February 2012 -Contact: Rafael J. Wysocki <rjw@xxxxxxx> +Contact: Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> Description: The /sys/power/wake_unlock file allows user space to deactivate wakeup sources created with the help of /sys/power/wake_lock.
Attachment:
signature.asc
Description: This is a digitally signed message part.
