On Thu, Aug 8, 2013 at 7:57 AM, Rafael J. Wysocki <rjw@xxxxxxx> wrote:
> On Thursday, August 08, 2013 03:35:13 PM Heikki Krogerus wrote:
>> If there is no ACPI entry for the irq, returning error from
>> acpi_pci_enable_irq() if the irq is 0.
>>
>> Prarit Bhargava reported an issue where he noticed that his
>> Dell PowerEdge 840 has buggy BIOS that does not supply ACPI
>> entries for irq with some devices. That lead into kernel
>> generating a warning "genirq: Flags mismatch irq 0...". This
>> will fix that issue.
>>
>> Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
>> Tested-by: Prarit Bhargava <prarit@xxxxxxxxxx>
>
> Hi Bjorn,
>
> Any objections to this?
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
>> ---
>> drivers/acpi/pci_irq.c | 10 +++++++++-
>> 1 file changed, 9 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
>> index 41c5e1b..902ed1c 100644
>> --- a/drivers/acpi/pci_irq.c
>> +++ b/drivers/acpi/pci_irq.c
>> @@ -419,8 +419,16 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
>> */
>> if (gsi < 0) {
>> u32 dev_gsi;
>> +
>> + /* Not accepting 0 as valid PCI IRQ. */
>> + if (!dev->irq) {
>> + dev_err(&dev->dev, "PCI INT %c: no IRQ\n",
>> + pin_name(pin));
>> + return -ENOENT;
>> + }
>> +
>> /* Interrupt Line values above 0xF are forbidden */
>> - if (dev->irq > 0 && (dev->irq <= 0xF) &&
>> + if ((dev->irq <= 0xF) &&
>> (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
>> dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
>> pin_name(pin), dev->irq);
>>
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
