RE: [PATCH 04/13] ACPI/IPMI: Fix race caused by the unprotected ACPI IPMI user

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Rafael J. Wysocki [mailto:rjw@xxxxxxx]
> Sent: Friday, July 26, 2013 5:59 AM
> 
> On Tuesday, July 23, 2013 04:09:26 PM Lv Zheng wrote:
> > This patch uses reference counting to fix the race caused by the
> > unprotected ACPI IPMI user.
> >
> > As the acpi_ipmi_device->user_interface check in
> > acpi_ipmi_space_handler() can happen before setting user_interface to
> > NULL and codes after the check in acpi_ipmi_space_handler() can happen
> > after user_interface becoming NULL, then the on-going
> > acpi_ipmi_space_handler() still can pass an invalid
> > acpi_ipmi_device->user_interface to ipmi_request_settime().  Such race
> > condition is not allowed by the IPMI layer's API design as crash will happen in
> ipmi_request_settime().
> > In IPMI layer, smi_gone()/new_smi() callbacks are protected by
> > smi_watchers_mutex, thus their invocations are serialized.  But as a
> > new smi can re-use the freed intf_num, it requires that the callback
> > implementation must not use intf_num as an identification mean or it
> > must ensure all references to the previous smi are all dropped before
> > exiting
> > smi_gone() callback.  In case of acpi_ipmi module, this means
> > ipmi_flush_tx_msg() must ensure all on-going IPMI transfers are
> > completed before exiting ipmi_flush_tx_msg().
> >
> > This patch follows ipmi_devintf.c design:
> > 1. Invoking ipmi_destroy_user() after the reference count of
> >    acpi_ipmi_device dropping to 0, this matches IPMI layer's API calling
> >    rule on ipmi_destroy_user() and ipmi_request_settime().
> > 2. References of acpi_ipmi_device dropping to 1 means tx_msg related to
> >    this acpi_ipmi_device are all freed, this can be used to implement the
> >    new flushing mechanism.  Note complete() must be retried so that the
> >    on-going tx_msg won't block flushing at the point to add tx_msg into
> >    tx_msg_list where reference of acpi_ipmi_device is held.  This matches
> >    the IPMI layer's callback rule on smi_gone()/new_smi() serialization.
> > 3. ipmi_flush_tx_msg() is performed after deleting acpi_ipmi_device from
> >    the list so that no new tx_msg can be created after entering flushing
> >    process.
> > 4. The flushing of tx_msg is also moved out of ipmi_lock in this patch.
> >
> > The forthcoming IPMI operation region handler installation changes
> > also requires acpi_ipmi_device be handled in the reference counting style.
> >
> > Authorship is also updated due to this design change.
> >
> > Signed-off-by: Lv Zheng <lv.zheng@xxxxxxxxx>
> > Cc: Zhao Yakui <yakui.zhao@xxxxxxxxx>
> > Reviewed-by: Huang Ying <ying.huang@xxxxxxxxx>
> > ---
> >  drivers/acpi/acpi_ipmi.c |  249
> > +++++++++++++++++++++++++++-------------------
> >  1 file changed, 149 insertions(+), 100 deletions(-)
> >
> > diff --git a/drivers/acpi/acpi_ipmi.c b/drivers/acpi/acpi_ipmi.c index
> > 527ee43..cbf25e0 100644
> > --- a/drivers/acpi/acpi_ipmi.c
> > +++ b/drivers/acpi/acpi_ipmi.c
> > @@ -1,8 +1,9 @@
> >  /*
> >   *  acpi_ipmi.c - ACPI IPMI opregion
> >   *
> > - *  Copyright (C) 2010 Intel Corporation
> > - *  Copyright (C) 2010 Zhao Yakui <yakui.zhao@xxxxxxxxx>
> > + *  Copyright (C) 2010, 2013 Intel Corporation
> > + *    Author: Zhao Yakui <yakui.zhao@xxxxxxxxx>
> > + *            Lv Zheng <lv.zheng@xxxxxxxxx>
> >   *
> >   *
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ~~~~~~~~~~
> >   *
> > @@ -67,6 +68,7 @@ struct acpi_ipmi_device {
> >  	long curr_msgid;
> >  	unsigned long flags;
> >  	struct ipmi_smi_info smi_data;
> > +	atomic_t refcnt;
> 
> Can you use a kref instead?

Please see my concerns in another email.

> 
> >  };
> >
> >  struct ipmi_driver_data {
> > @@ -107,8 +109,8 @@ struct acpi_ipmi_buffer {  static void
> > ipmi_register_bmc(int iface, struct device *dev);  static void
> > ipmi_bmc_gone(int iface);  static void ipmi_msg_handler(struct
> > ipmi_recv_msg *msg, void *user_msg_data); -static void
> > acpi_add_ipmi_device(struct acpi_ipmi_device *ipmi_device); -static
> > void acpi_remove_ipmi_device(struct acpi_ipmi_device *ipmi_device);
> > +static int ipmi_install_space_handler(struct acpi_ipmi_device *ipmi);
> > +static void ipmi_remove_space_handler(struct acpi_ipmi_device *ipmi);
> >
> >  static struct ipmi_driver_data driver_data = {
> >  	.ipmi_devices = LIST_HEAD_INIT(driver_data.ipmi_devices),
> > @@ -122,6 +124,80 @@ static struct ipmi_driver_data driver_data = {
> >  	},
> >  };
> >
> > +static struct acpi_ipmi_device *
> > +ipmi_dev_alloc(int iface, struct ipmi_smi_info *smi_data, acpi_handle
> > +handle) {
> > +	struct acpi_ipmi_device *ipmi_device;
> > +	int err;
> > +	ipmi_user_t user;
> > +
> > +	ipmi_device = kzalloc(sizeof(*ipmi_device), GFP_KERNEL);
> > +	if (!ipmi_device)
> > +		return NULL;
> > +
> > +	atomic_set(&ipmi_device->refcnt, 1);
> > +	INIT_LIST_HEAD(&ipmi_device->head);
> > +	INIT_LIST_HEAD(&ipmi_device->tx_msg_list);
> > +	spin_lock_init(&ipmi_device->tx_msg_lock);
> > +
> > +	ipmi_device->handle = handle;
> > +	ipmi_device->pnp_dev = to_pnp_dev(get_device(smi_data->dev));
> > +	memcpy(&ipmi_device->smi_data, smi_data, sizeof(struct
> ipmi_smi_info));
> > +	ipmi_device->ipmi_ifnum = iface;
> > +
> > +	err = ipmi_create_user(iface, &driver_data.ipmi_hndlrs,
> > +			       ipmi_device, &user);
> > +	if (err) {
> > +		put_device(smi_data->dev);
> > +		kfree(ipmi_device);
> > +		return NULL;
> > +	}
> > +	ipmi_device->user_interface = user;
> > +	ipmi_install_space_handler(ipmi_device);
> > +
> > +	return ipmi_device;
> > +}
> > +
> > +static struct acpi_ipmi_device *
> > +acpi_ipmi_dev_get(struct acpi_ipmi_device *ipmi_device) {
> > +	if (ipmi_device)
> > +		atomic_inc(&ipmi_device->refcnt);
> > +	return ipmi_device;
> > +}
> > +
> > +static void ipmi_dev_release(struct acpi_ipmi_device *ipmi_device) {
> > +	ipmi_remove_space_handler(ipmi_device);
> > +	ipmi_destroy_user(ipmi_device->user_interface);
> > +	put_device(ipmi_device->smi_data.dev);
> > +	kfree(ipmi_device);
> > +}
> > +
> > +static void acpi_ipmi_dev_put(struct acpi_ipmi_device *ipmi_device) {
> > +	if (ipmi_device && atomic_dec_and_test(&ipmi_device->refcnt))
> > +		ipmi_dev_release(ipmi_device);
> > +}
> > +
> > +static struct acpi_ipmi_device *acpi_ipmi_get_targeted_smi(int iface)
> > +{
> > +	int dev_found = 0;
> > +	struct acpi_ipmi_device *ipmi_device;
> > +
> 
> Why don't you do
> 
> 	struct acpi_ipmi_device *ipmi_device, *ret = NULL;
> 
> and then ->
> 
> > +	mutex_lock(&driver_data.ipmi_lock);
> > +	list_for_each_entry(ipmi_device, &driver_data.ipmi_devices, head) {
> > +		if (ipmi_device->ipmi_ifnum == iface) {
> 
> ->			ret = ipmi_device; ->
> 
> > +			dev_found = 1;
> > +			acpi_ipmi_dev_get(ipmi_device);
> > +			break;
> > +		}
> > +	}
> > +	mutex_unlock(&driver_data.ipmi_lock);
> > +
> > +	return dev_found ? ipmi_device : NULL;
> 
> ->	return ret;

OK.

> 
> > +}
> > +
> >  static struct acpi_ipmi_msg *acpi_alloc_ipmi_msg(struct
> > acpi_ipmi_device *ipmi)  {
> >  	struct acpi_ipmi_msg *ipmi_msg;
> > @@ -228,25 +304,24 @@ static void acpi_format_ipmi_response(struct
> > acpi_ipmi_msg *msg,  static void ipmi_flush_tx_msg(struct
> > acpi_ipmi_device *ipmi)  {
> >  	struct acpi_ipmi_msg *tx_msg, *temp;
> > -	int count = HZ / 10;
> > -	struct pnp_dev *pnp_dev = ipmi->pnp_dev;
> >  	unsigned long flags;
> >
> > -	spin_lock_irqsave(&ipmi->tx_msg_lock, flags);
> > -	list_for_each_entry_safe(tx_msg, temp, &ipmi->tx_msg_list, head) {
> > -		/* wake up the sleep thread on the Tx msg */
> > -		complete(&tx_msg->tx_complete);
> > -	}
> > -	spin_unlock_irqrestore(&ipmi->tx_msg_lock, flags);
> > -
> > -	/* wait for about 100ms to flush the tx message list */
> > -	while (count--) {
> > -		if (list_empty(&ipmi->tx_msg_list))
> > -			break;
> > -		schedule_timeout(1);
> > +	/*
> > +	 * NOTE: Synchronous Flushing
> > +	 * Wait until refnct dropping to 1 - no other users unless this
> > +	 * context.  This function should always be called before
> > +	 * acpi_ipmi_device destruction.
> > +	 */
> > +	while (atomic_read(&ipmi->refcnt) > 1) {
> 
> Isn't this racy?  What if we see that the refcount is 1 and break the loop, but
> someone else bumps up the refcount at the same time?

No, it's not racy.
Flushing codes here is invoked after acpi_ipmi_device disappearing from the object managers.
Please look at the ipmi_bmc_gone() and acpi_ipmi_exit().
The ipmi_flush_tx_msg() will only be called after a "list_del()".
There will be no new transfers created in the acpi_ipmi_space_handler() as acpi_ipmi_get_targeted_smi() will return NULL after the "list_del()".

So there are no chances that it reaches to 1 and go back again as the refcount will only increases from 1 to > 1 unless it is still in an object managers.
The trick here is to drop all of the object managers' reference and only hold the "call chain" reference here (thus it is 1) in the ipmi_bmc_gone() and acpi_ipmi_exit().
In case of this patch, the object reference count is converted into "call chain" reference count in the ipmi_bmc_gone() and acpi_ipmi_exit().
The waiting codes here then can wait the reference count dropping to 1 which indicates all on-going transfer references are also get dropped.

> 
> > +		spin_lock_irqsave(&ipmi->tx_msg_lock, flags);
> > +		list_for_each_entry_safe(tx_msg, temp,
> > +					 &ipmi->tx_msg_list, head) {
> > +			/* wake up the sleep thread on the Tx msg */
> > +			complete(&tx_msg->tx_complete);
> > +		}
> > +		spin_unlock_irqrestore(&ipmi->tx_msg_lock, flags);
> > +		schedule_timeout_uninterruptible(msecs_to_jiffies(1));
> >  	}
> > -	if (!list_empty(&ipmi->tx_msg_list))
> > -		dev_warn(&pnp_dev->dev, "tx msg list is not NULL\n");
> >  }
> >
> >  static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void
> > *user_msg_data) @@ -304,22 +379,26 @@ static void
> > ipmi_register_bmc(int iface, struct device *dev)  {
> >  	struct acpi_ipmi_device *ipmi_device, *temp;
> >  	struct pnp_dev *pnp_dev;
> > -	ipmi_user_t		user;
> >  	int err;
> >  	struct ipmi_smi_info smi_data;
> >  	acpi_handle handle;
> >
> >  	err = ipmi_get_smi_info(iface, &smi_data);
> > -
> >  	if (err)
> >  		return;
> >
> > -	if (smi_data.addr_src != SI_ACPI) {
> > -		put_device(smi_data.dev);
> > -		return;
> > -	}
> > -
> > +	if (smi_data.addr_src != SI_ACPI)
> > +		goto err_ref;
> >  	handle = smi_data.addr_info.acpi_info.acpi_handle;
> > +	if (!handle)
> > +		goto err_ref;
> > +	pnp_dev = to_pnp_dev(smi_data.dev);
> > +
> > +	ipmi_device = ipmi_dev_alloc(iface, &smi_data, handle);
> > +	if (!ipmi_device) {
> > +		dev_warn(&pnp_dev->dev, "Can't create IPMI user interface\n");
> > +		goto err_ref;
> > +	}
> >
> >  	mutex_lock(&driver_data.ipmi_lock);
> >  	list_for_each_entry(temp, &driver_data.ipmi_devices, head) { @@
> > -328,54 +407,42 @@ static void ipmi_register_bmc(int iface, struct device
> *dev)
> >  		 * to the device list, don't add it again.
> >  		 */
> >  		if (temp->handle == handle)
> > -			goto out;
> > +			goto err_lock;
> >  	}
> >
> > -	ipmi_device = kzalloc(sizeof(*ipmi_device), GFP_KERNEL);
> > -
> > -	if (!ipmi_device)
> > -		goto out;
> > -
> > -	pnp_dev = to_pnp_dev(smi_data.dev);
> > -	ipmi_device->handle = handle;
> > -	ipmi_device->pnp_dev = pnp_dev;
> > -
> > -	err = ipmi_create_user(iface, &driver_data.ipmi_hndlrs,
> > -					ipmi_device, &user);
> > -	if (err) {
> > -		dev_warn(&pnp_dev->dev, "Can't create IPMI user interface\n");
> > -		kfree(ipmi_device);
> > -		goto out;
> > -	}
> > -	acpi_add_ipmi_device(ipmi_device);
> > -	ipmi_device->user_interface = user;
> > -	ipmi_device->ipmi_ifnum = iface;
> > +	list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices);
> >  	mutex_unlock(&driver_data.ipmi_lock);
> > -	memcpy(&ipmi_device->smi_data, &smi_data, sizeof(struct
> ipmi_smi_info));
> > +	put_device(smi_data.dev);
> >  	return;
> >
> > -out:
> > +err_lock:
> >  	mutex_unlock(&driver_data.ipmi_lock);
> > +	ipmi_dev_release(ipmi_device);
> > +err_ref:
> >  	put_device(smi_data.dev);
> >  	return;
> >  }
> >
> >  static void ipmi_bmc_gone(int iface)
> >  {
> > -	struct acpi_ipmi_device *ipmi_device, *temp;
> > +	int dev_found = 0;
> > +	struct acpi_ipmi_device *ipmi_device;
> >
> >  	mutex_lock(&driver_data.ipmi_lock);
> > -	list_for_each_entry_safe(ipmi_device, temp,
> > -				&driver_data.ipmi_devices, head) {
> > -		if (ipmi_device->ipmi_ifnum != iface)
> > -			continue;
> > -
> > -		acpi_remove_ipmi_device(ipmi_device);
> > -		put_device(ipmi_device->smi_data.dev);
> > -		kfree(ipmi_device);
> > -		break;
> > +	list_for_each_entry(ipmi_device, &driver_data.ipmi_devices, head) {
> > +		if (ipmi_device->ipmi_ifnum == iface) {
> > +			dev_found = 1;
> 
> You can do the list_del() here, because you're under the mutex, so others won't
> see the list in an inconsistens state and you're about to break anyway.

I'm trying to improve the code maintainability (hence the software internal quality) here for the reviewers.
If we introduce a list_del()/break inside a list_for_each_entry(), then it is pretty much likely that the list_for_each_entry() does not appear in a future patch that deletes the "break".
And reviewers could not detect such bug.
The coding style like what I'm showing here can avoid such issue.
I was thinking maintainers would be happy with such codes - it can prevent many unhappy small mistakes from happening.

Thanks for commenting.

Best regards
-Lv

> 
> > +			break;
> > +		}
> >  	}
> > +	if (dev_found)
> > +		list_del(&ipmi_device->head);
> >  	mutex_unlock(&driver_data.ipmi_lock);
> > +
> > +	if (dev_found) {
> > +		ipmi_flush_tx_msg(ipmi_device);
> > +		acpi_ipmi_dev_put(ipmi_device);
> > +	}
> >  }
> >
> >  /*
> > ----------------------------------------------------------------------
> > ---- @@ -400,7 +467,8 @@ acpi_ipmi_space_handler(u32 function,
> > acpi_physical_address address,
> >  			void *handler_context, void *region_context)  {
> >  	struct acpi_ipmi_msg *tx_msg;
> > -	struct acpi_ipmi_device *ipmi_device = handler_context;
> > +	int iface = (long)handler_context;
> > +	struct acpi_ipmi_device *ipmi_device;
> >  	int err, rem_time;
> >  	acpi_status status;
> >  	unsigned long flags;
> > @@ -414,12 +482,15 @@ acpi_ipmi_space_handler(u32 function,
> acpi_physical_address address,
> >  	if ((function & ACPI_IO_MASK) == ACPI_READ)
> >  		return AE_TYPE;
> >
> > -	if (!ipmi_device->user_interface)
> > +	ipmi_device = acpi_ipmi_get_targeted_smi(iface);
> > +	if (!ipmi_device)
> >  		return AE_NOT_EXIST;
> >
> >  	tx_msg = acpi_alloc_ipmi_msg(ipmi_device);
> > -	if (!tx_msg)
> > -		return AE_NO_MEMORY;
> > +	if (!tx_msg) {
> > +		status = AE_NO_MEMORY;
> > +		goto out_ref;
> > +	}
> >
> >  	if (acpi_format_ipmi_request(tx_msg, address, value) != 0) {
> >  		status = AE_TYPE;
> > @@ -449,6 +520,8 @@ out_list:
> >  	spin_unlock_irqrestore(&ipmi_device->tx_msg_lock, flags);
> >  out_msg:
> >  	kfree(tx_msg);
> > +out_ref:
> > +	acpi_ipmi_dev_put(ipmi_device);
> >  	return status;
> >  }
> >
> > @@ -473,7 +546,7 @@ static int ipmi_install_space_handler(struct
> acpi_ipmi_device *ipmi)
> >  	status = acpi_install_address_space_handler(ipmi->handle,
> >  						    ACPI_ADR_SPACE_IPMI,
> >  						    &acpi_ipmi_space_handler,
> > -						    NULL, ipmi);
> > +						    NULL, (void *)((long)ipmi->ipmi_ifnum));
> >  	if (ACPI_FAILURE(status)) {
> >  		struct pnp_dev *pnp_dev = ipmi->pnp_dev;
> >  		dev_warn(&pnp_dev->dev, "Can't register IPMI opregion space "
> > @@ -484,36 +557,6 @@ static int ipmi_install_space_handler(struct
> acpi_ipmi_device *ipmi)
> >  	return 0;
> >  }
> >
> > -static void acpi_add_ipmi_device(struct acpi_ipmi_device
> > *ipmi_device) -{
> > -
> > -	INIT_LIST_HEAD(&ipmi_device->head);
> > -
> > -	spin_lock_init(&ipmi_device->tx_msg_lock);
> > -	INIT_LIST_HEAD(&ipmi_device->tx_msg_list);
> > -	ipmi_install_space_handler(ipmi_device);
> > -
> > -	list_add_tail(&ipmi_device->head, &driver_data.ipmi_devices);
> > -}
> > -
> > -static void acpi_remove_ipmi_device(struct acpi_ipmi_device
> > *ipmi_device) -{
> > -	/*
> > -	 * If the IPMI user interface is created, it should be
> > -	 * destroyed.
> > -	 */
> > -	if (ipmi_device->user_interface) {
> > -		ipmi_destroy_user(ipmi_device->user_interface);
> > -		ipmi_device->user_interface = NULL;
> > -	}
> > -	/* flush the Tx_msg list */
> > -	if (!list_empty(&ipmi_device->tx_msg_list))
> > -		ipmi_flush_tx_msg(ipmi_device);
> > -
> > -	list_del(&ipmi_device->head);
> > -	ipmi_remove_space_handler(ipmi_device);
> > -}
> > -
> >  static int __init acpi_ipmi_init(void)  {
> >  	int result = 0;
> > @@ -530,7 +573,7 @@ static int __init acpi_ipmi_init(void)
> >
> >  static void __exit acpi_ipmi_exit(void)  {
> > -	struct acpi_ipmi_device *ipmi_device, *temp;
> > +	struct acpi_ipmi_device *ipmi_device;
> >
> >  	if (acpi_disabled)
> >  		return;
> > @@ -544,11 +587,17 @@ static void __exit acpi_ipmi_exit(void)
> >  	 * handler and free it.
> >  	 */
> >  	mutex_lock(&driver_data.ipmi_lock);
> > -	list_for_each_entry_safe(ipmi_device, temp,
> > -				&driver_data.ipmi_devices, head) {
> > -		acpi_remove_ipmi_device(ipmi_device);
> > -		put_device(ipmi_device->smi_data.dev);
> > -		kfree(ipmi_device);
> > +	while (!list_empty(&driver_data.ipmi_devices)) {
> > +		ipmi_device = list_first_entry(&driver_data.ipmi_devices,
> > +					       struct acpi_ipmi_device,
> > +					       head);
> > +		list_del(&ipmi_device->head);
> > +		mutex_unlock(&driver_data.ipmi_lock);
> > +
> > +		ipmi_flush_tx_msg(ipmi_device);
> > +		acpi_ipmi_dev_put(ipmi_device);
> > +
> > +		mutex_lock(&driver_data.ipmi_lock);
> >  	}
> >  	mutex_unlock(&driver_data.ipmi_lock);
> >  }
> >
> --
> I speak only for myself.
> Rafael J. Wysocki, Intel Open Source Technology Center.
��.n��������+%������w��{.n�����{�����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux