On Wednesday, July 24, 2013 04:03:48 PM Bjorn Helgaas wrote: > [+cc Rafael, linux-acpi] > > On Mon, Jul 22, 2013 at 3:37 PM, Yinghai Lu <yinghai@xxxxxxxxxx> wrote: > > BenH reported that there is some assign unassigned resource problem > > in powerpc. > > > > It turns out after > > | commit 0c5be0cb0edfe3b5c4b62eac68aa2aa15ec681af > > | Date: Thu Feb 23 19:23:29 2012 -0800 > > | > > | PCI: Retry on IORESOURCE_IO type allocations > > > > even the root bus does not have io port range, it will keep retrying > > to realloc with mmio. > > > > After checking the code, found that we bound io port and mmio fail > > path together. > > First patch fix the problem, that will not make mmio fall back to must-only > > when only have io port fail with must+optional. > > Can you point out again which patch actually fixes Ben's problem? I > don't see it mentioned in the changelogs, and I'd like to mention it > there. > > I applied these to my pci/yinghai-assign-unassigned-v6 branch for > v3.12. I expect to update these (at least the changelog), so this > branch will be rebased before being merged to -next. > > Rafael, there are a couple changes to drivers/acpi/pci_root.c and > drivers/pci/hotplug/acpiphp_glue.c here, and I want to make sure > you're OK with them before going farther. > > Here's the branch: > http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/yinghai-assign-unassigned-v6 I'm generally OK with them, as long as doing pci_bus_add_devices(bus) without pci_enable_bridges() for that bus before is going to work. Thanks, Rafael > > That is first patch. > > > > During we found the fix for that problem, found that we can separate assign > > unassigned resources to per root bus. > > that will make the code simple, also could reuse it for hotadd path. > > > > Besides that, "PCI: Enable pci bridge when it is needed" will delay pci > > bridge enabling, that will kill another difference between booting path > > and hotadd path. > > > > -v4: split first patch into 4 patches per Bjorn. > > -v5: drop two patches that will pass root bus resource mask after we found > > simple and less intrusive way to fix the problem. > > -v6: refreshed on top of v3.11-rc2 > > > > could get from > > git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-assign-unassigned > > > > Thanks > > > > Yinghai > > > > Yinghai Lu (7): > > PCI: Don't use temp bus for pci_bus_release_bridge_resources > > PCI: Use pci_walk_bus to detect unassigned resources > > PCI: Check pci bus address for unassigned res > > PCI: Introduce enable_local to prepare per root bus handling > > PCI: Split pci_assign_unassigned_resources to per root bus > > PCI: Enable pci bridge when it is needed > > PCI: Retry assign unassigned resources for hotadd root bus > > > > arch/arm/kernel/bios32.c | 5 -- > > arch/m68k/platform/coldfire/pci.c | 1 - > > arch/mips/pci/pci.c | 1 - > > arch/sh/drivers/pci/pci.c | 1 - > > drivers/acpi/pci_root.c | 5 +- > > drivers/parisc/lba_pci.c | 1 - > > drivers/pci/bus.c | 19 ----- > > drivers/pci/hotplug/acpiphp_glue.c | 1 - > > drivers/pci/pci.c | 20 ++++++ > > drivers/pci/probe.c | 1 - > > drivers/pci/setup-bus.c | 141 +++++++++++++++++++------------------ > > drivers/pcmcia/cardbus.c | 1 - > > include/linux/pci.h | 2 +- > > 13 files changed, 95 insertions(+), 104 deletions(-) > > > > -- > > 1.8.1.4 > > -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
