On Wednesday, May 29, 2013 10:51:11 AM Alan Stern wrote:
> On Wed, 29 May 2013, Rafael J. Wysocki wrote:
>
> > From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> >
> > The "runtime idle" helper routine, rpm_idle(), currently ignores
> > return values from .runtime_idle() callbacks executed by it.
> >
> > However, it turns out that many subsystems use the generic idle
> > callback routine pm_generic_runtime_idle() which checks the return
> > value of the driver's callback and executes pm_runtime_suspend() for
> > the device unless that value is different from 0. If that logic is
> > moved to rpm_idle() instead, pm_generic_runtime_idle() can be dropped
> > and its users will not need any .runtime_idle() callbacks any more.
>
> Since you're making this change, wouldn't it be a good idea to adopt
> Mika's original suggestion and turn on the RPM_AUTO bit in rpmflags
> when the use_autosuspend flag is set?
I'm not actually sure. It can be done, but I'd prefer to do that as a separate
change in any case.
> > Moreover, the PCI subsystem's .runtime_idle() routine,
> > pci_pm_runtime_idle(), works in analogy with the generic one and if
> > rpm_idle() calls rpm_suspend() after 0 has been returned by the
> > .runtime_idle() callback executed by it, that routine will not be
> > necessary any more and may be dropped.
>
> See below.
>
> What about cases where the runtime-idle callback does
> rpm_schedule_suspend or rpm_request_suspend? You'd have to make sure
> that it returns -EBUSY in such cases. Did you audit for this?
As far as I could.
I'm not worried about the subsystems modified by this patch, because the
functionality there won't change (except for PCI, that is).
> > Index: linux-pm/Documentation/power/runtime_pm.txt
> > ===================================================================
> > --- linux-pm.orig/Documentation/power/runtime_pm.txt
> > +++ linux-pm/Documentation/power/runtime_pm.txt
> > @@ -660,11 +660,6 @@ Subsystems may wish to conserve code spa
> > management callbacks provided by the PM core, defined in
> > driver/base/power/generic_ops.c:
> >
> > - int pm_generic_runtime_idle(struct device *dev);
> > - - invoke the ->runtime_idle() callback provided by the driver of this
> > - device, if defined, and call pm_runtime_suspend() for this device if the
> > - return value is 0 or the callback is not defined
> > -
>
> The documentation for the runtime-idle callback needs to be updated too.
Well, I actually couldn't find the part of it that would need to be updated. :-)
> > Index: linux-pm/drivers/pci/pci-driver.c
> > ===================================================================
> > --- linux-pm.orig/drivers/pci/pci-driver.c
> > +++ linux-pm/drivers/pci/pci-driver.c
> > @@ -1046,32 +1046,6 @@ static int pci_pm_runtime_resume(struct
> > return rc;
> > }
> >
> > -static int pci_pm_runtime_idle(struct device *dev)
> > -{
> > - struct pci_dev *pci_dev = to_pci_dev(dev);
> > - const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
> > -
> > - /*
> > - * If pci_dev->driver is not set (unbound), the device should
> > - * always remain in D0 regardless of the runtime PM status
> > - */
> > - if (!pci_dev->driver)
> > - goto out;
> > -
> > - if (!pm)
> > - return -ENOSYS;
> > -
> > - if (pm->runtime_idle) {
> > - int ret = pm->runtime_idle(dev);
> > - if (ret)
> > - return ret;
> > - }
> > -
> > -out:
> > - pm_runtime_suspend(dev);
> > - return 0;
> > -}
>
> This may not be a safe change, because now the behavior is different
> in the case where dev->driver is set but pci_dev->driver isn't.
That's a good point. I think I'll drop the PCI change, then.
Or rather, I'll just remove the pm_runtime_suspend() call from
pci_pm_runtime_idle(). :-)
> The difference is that you will now call the driver's runtime-idle
> handler, whereas the existing code doesn't.
>
> In fact, this may turn out to be a more widespread problem.
> dev->driver gets set before the probe routine is called, and it gets
> cleared after the remove routine is called. A runtime PM callback to
> the driver during these windows isn't a good idea. Erasing subsystems'
> runtime_idle handlers, as this patch does, makes it impossible for the
> subsystems to protect against this.
Except for PCI it only removes the ones that point to
pm_generic_runtime_idle(), which obviously doesn't check that.
> The patch also needs to update
> drivers/usb/core/driver.c:usb_runtime_idle().
Yes, it does.
> If you include Mika's suggestion, the routine can be removed entirely.
Later. :-)
Thanks,
Rafael
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
