Hi!
> > Is that even right algoritm?
> >
> sorry the changelog is not clear enough here.
> I should say,
> "keep the fan on when the temperature is raising"
> "turn off the fan when the temperature is dropping"
>
> > Assume I'm running at very cold room, lets say -10C. Assume idle CPU
> > will hover around 30C with no fan, or hover around 10C with fan
> > running, trip point being 50C.
> >
> > You _could_ leave fan off until 50C, having silent, passively cooled
> > system.
> >
> > What it will do instead is annoyingly pulse fan at 10C.
> >
> First, fan will never spins on if the temperature never hits 50C.
>
> let's see how ACPI 3.0 fan (just have on and off state) is supposed to
> work after overheat.
> 1. temperature goes above 50C
> 2. Fan starts to spin.
> 3. a) if temperature goes higher (if possible), fan keeps on.
> b) if temperature drops, but still above 50C. the fan keeps on.
> c) if temperature drops below 50C, the last temperature is above 50C,
> thus the fan is turned off.
> d) if the temperature goes higher again, the fan will not spin on
> until the temperature is higher than the trip point (50C) again.
So the fan is spinning iff the temperature is over threshold, right?
> is this behavior what you want?
That's better, yes. Even better would be if it had some hysteresis:
turn the fan on at threshold temperature, but turn it off only if it
drops below temperature-5C, or if it is below threshold for 1 minute.
Thanks,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
