Hi! I got this during resume on thinkpad x60: Machine resumed ok, but I guess something is wrong there... Pavel sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. usb usb1: usb resume ehci-pci 0000:00:1d.7: resume root hub usb usb2: usb resume usb usb2: wakeup_rh hub 2-0:1.0: hub_reset_resume hub 2-0:1.0: trying to enable port power on non-switchable hub usb usb3: usb resume usb usb3: wakeup_rh hub 3-0:1.0: hub_reset_resume hub 3-0:1.0: trying to enable port power on non-switchable hub usb usb4: usb resume usb usb4: wakeup_rh hub 4-0:1.0: hub_reset_resume hub 4-0:1.0: trying to enable port power on non-switchable hub usb usb5: usb resume usb usb5: wakeup_rh hub 5-0:1.0: hub_reset_resume hub 5-0:1.0: trying to enable port power on non-switchable hub ------------[ cut here ]------------ WARNING: at drivers/pnp/pnpacpi/core.c:98 pnpacpi_set_resources+0x130/0x140() Hardware name: 17097HU Modules linked in: Pid: 27615, comm: pm-suspend Tainted: G W 3.9.0-rc8+ #248 Call Trace: [<c022ca4d>] warn_slowpath_common+0x6d/0xa0 [<c04d1db0>] ? pnpacpi_set_resources+0x130/0x140 [<c04d1db0>] ? pnpacpi_set_resources+0x130/0x140 [<c022ca9d>] warn_slowpath_null+0x1d/0x20 [<c04d1db0>] pnpacpi_set_resources+0x130/0x140 [<c048ccbe>] ? acpi_bus_set_power+0x72/0x7e [<c04cf196>] pnp_start_dev+0x36/0xb0 [<c0276fda>] ? mutex_remove_waiter+0x3a/0x100 [<c04cdc2f>] pnp_bus_resume+0x5f/0x70 [<c05859fd>] dpm_run_callback+0x3d/0x90 [<c04cdbd0>] ? pnp_device_shutdown+0x20/0x20 [<c0585ae7>] device_resume+0x97/0x160 [<c05861f1>] dpm_resume+0xe1/0x1f0 [<c0586f2b>] dpm_resume_end+0xb/0x20 [<c026600f>] suspend_devices_and_enter+0x13f/0x2f0 [<c02663c1>] pm_suspend+0x201/0x240 [<c02657bd>] state_store+0x8d/0x90 [<c0265730>] ? wakeup_count_show+0x40/0x40 [<c043ee80>] kobj_attr_store+0x20/0x30 [<c0326cc9>] sysfs_write_file+0x99/0xf0 [<c02d2a8a>] vfs_write+0x9a/0x140 [<c0326c30>] ? sysfs_open_file+0x1e0/0x1e0 [<c02d2bf9>] sys_write+0x49/0x80 [<c091c2b8>] sysenter_do_call+0x12/0x31 ---[ end trace 752a759b0728fd3d ]--- serial 00:09: activated parport_pc 00:0a: activated ata6: port disabled--ignoring hub 1-0:1.0: hub_resume ehci-pci 0000:00:1d.7: GetStatus port:6 status 001002 0 ACK POWER sig=se0 CSC hub 1-0:1.0: port 6: status 0100 change 0001 uhci_hcd 0000:00:1d.3: port 2 portsc 009b,00 hub 5-0:1.0: port 2: status 0101 change 0003 hub 1-0:1.0: port 6 status 0000.0100 after resume, -19 usb 1-6: can't resume, status -19 hub 1-0:1.0: logical disconnect on port 6 usb 5-2: finish reset-resume usb 5-2: reset full-speed USB device number 3 using uhci_hcd usb 5-2: ep0 maxpacket = 8 usb usb2: suspend_rh (auto-stop) usb usb3: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Starting disk thinkpad_acpi: ACPI backlight control delay disabled PM: resume of devices complete after 2924.037 msecs -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
