Hi, Martin, On Wed, 2013-04-03 at 14:16 +0200, Martin Mokrejs wrote: > Meanwhile, the raw data: http://195.113.57.32/~mmokrejs/tmp/20130402.tar.bz2 > (size 468641 bytes) Thanks a lot! Your information is very complete and clear :) > They were collected by: > > # cat ~/bin/collect_runtime_status.sh > #!/bin/sh > grep . /sys/bus/pci/devices/*/power/runtime_status > runtime_status_"$1".txt > grep . /sys/bus/pci/devices/*/power/control > control_"$1".txt > cat /proc/interrupts > interrupts_"$1".txt > cat /proc/iomem > iomem_"$1".txt > lspci -vvv > lspci_vvv_"$1".txt > dmesg > dmesg_"$1".txt > # > > Just do 'ls -latr' to see the ordering of the files as they were created. > The longer the filename, the later in the test process. The names should be > relatively self-explaining. Definitely, from the log files you should see > what happened in real and therefore, can figure out what the (maybe weird) > long filename really meant. > > Sometimes I manually recorded lsusb of dmesg_final.txt, mostly after I did some > extra tests but but not want to record every step by the above 6 files. > > In one or two places I added some my own notes into COMMENTS file. > > > > > I will try to guide your below where you can study which of the bugs. Mostly, > for each bug you need just one subdirectory to look into, the other are just > repeated the same bug under different kernel version or another patch. > However, Sarah for the xHCI dead port issue will need to compare by diff > two directories, one with the TI-based controller tests, the other with the > NEC-based tests. Especially there, I would do something like: > > cd *TI-based; for f in dmesg*; do cut -c 15- $f > /tmp/TI/$f; done > cd ../*NEC-based; for f in dmesg*; do cut -c 15- $f > /tmp/NEC/$f; done > > Then it should be easier to poke through file captured at the same test step, > like: > > diff -u -w /tmp/TI/dmesg_initial__mouse_attached__unplugged__reattached_but_port_dead.txt \ > /tmp/NEC/dmesg_initial__mouse_attached__detached__reattached.txt > > > > Other than that, just diff pairs of files with each other, like: > > diff -u -w lspci_vvv_initial.txt lspci_vvv_initial__mouse_attached.txt > > > Sorry that I sometimes used only a single underscore instead of double underscores > to separate the test steps from each other in the filename. > > > Martin Mokrejs wrote: > > [ +linux-pci and Yinghai as they suffered already those many emails on individual > > threads so one overviewing email hopefully won't harm] ;-) > > > > Martin Mokrejs wrote: > >> > >> > >> Bjorn Helgaas wrote: > >>> On Tue, Apr 2, 2013 at 9:02 AM, Martin Mokrejs > >>> <mmokrejs@xxxxxxxxxxxxxxxxxx> wrote: > >>>> Hi Ying, > >>>> > >>>> huang ying wrote: > >>> > >>>>> And please give me the full dmesg for boot and incremental dmesg for > >>>>> operations. > >>>> > >>>> > >>>> The incremental bits here, the full dmesg will send only directly to your email, due to its size. > >>> > >>> Is there a bugzilla for this issue? Please attach the complete dmesg > >>> there or somewhere similar so we can all benefit. > >> > >> I changed my mind. I am attaching the dmesg here but omitting linux-acpi > >> list. After I hear a proposal from Rafel/Bjorn I will open separate bugs. > >> I thought that the threads I started so far were enough but yes, dmesg > >> files don't pass through list filters so I should move that to bugzilla. > >> > >> so far my view of the the bugs was: > >> > >> 1) acpiphp hotplug broken due to upstream pcieport 1c.7 PME# enabled > >> (eSATA-based card) > > > > Fixed by Ying Huang port_dbg.patch applied over 3.8.5 (fixes acpiphp hotplug > > of eSATA and Firewire cards, NOT the hotplug of a NEC-based USB3 card -> hence > > the bug 4) below). Now I can continue using laptop-mode-tools. > > 20130402/3.8.5-ying_port-dbg__with_laptop-mode-tools_eSATA_testing > 20130402/3.8.3-vanilla__with_laptop-mode-tools (with some comments in > COMMENTS file) Thanks for your testing! > >> 2) xHCI dead due to to its suspend - 3.8 series and above > > > > Not fixed by port_dbg.patch applied over 3.8.5. Interestingly, a NEC-based > > XHCI card *in an express card slot* does not suffer this suspend issue. > > Although it is being put into suspend if a device is unplugged. > > 20130402/3.8.5-ying_port-dbg__with_laptop-mode-tools_xHCI_test_TI-based > 20130402/3.8.5-ying_port-dbg__with_laptop-mode-tools_xHCI_test_NEC-based > > Same thing but yet without the port_dbg.patch: > 20130402/3.9-rc5__with_2368081__with-latop-mode-tools_xhci_testing/ It appears that TI xHCI dead port issue will present even if the PCIe port will never go suspended. So I think this bug is not related to PCIe port runtime PM but related to USB xHCI. Do you agree Sarah? [snip] Best Regards, Huang Ying -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
