Re: [PATCH] ACPI / PM: Take unusual configurations of power resources into account (was: Re: [GIT PATCH] USB patches for 3.9-rc1)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Saturday, February 23, 2013 03:48:59 PM Fabio Baltieri wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> > Subject: ACPI / PM: Take unusual configurations of power resources into account
> > 
> > Commit d2e5f0c (ACPI / PCI: Rework the setup and cleanup of device
> > wakeup) moved the initial disabling of system wakeup for PCI devices
> > into a place where it can actually work and that exposed a hidden old
> > issue with crap^Wunusual system designs where the same power
> > resources are used for both wakeup power and device power control at
> > run time.
> > 
> > Namely, say there is one power resource such that the ACPI power
> > state D0 of a PCI device depends on that power resource (i.e. the
> > device is in D0 when that power resource is "on") and it is used
> > as a wakeup power resource for the same device.  Then, calling
> > acpi_pci_sleep_wake(pci_dev, false) for the device in question will
> > cause the reference counter of that power resource to drop to 0,
> > which in turn will cause it to be turned off.  As a result, the
> > device will go into D3cold at that point, although it should have
> > stayed in D0.
> > 
> > As it turns out, that happens to USB controllers on some laptops
> > and USB becomes unusable on those machines as a result, which is
> > a major regression from v3.8.
> > 
> > To fix this problem, (1) increment the reference counters of wakup
> > power resources during their initialization if they are "on"
> > initially, (2) prevent acpi_disable_wakeup_device_power() from
> > decrementing the reference counters of wakeup power resources that
> > were not enabled for wakeup power previously, and (3) prevent
> > acpi_enable_wakeup_device_power() from incrementing the reference
> > counters of wakeup power resources that already are enabled for
> > wakeup power.
> > 
> > In addition to that, if it is impossible to determine the initial
> > states of wakeup power resources, avoid enabling wakeup for devices
> > whose wakeup power depends on those power resources.
> > 
> > Reported-by: Dave Jones <davej@xxxxxxxxxx>
> > Reported-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> 
> Works just fine!
> 
> Tested-by: Fabio Baltieri <fabio.baltieri@xxxxxxxxxx>

Thanks for verifying!

Rafael


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux