Hi Vasilis,
2013/02/20 3:11, Vasilis Liaskovitis wrote:
Hi,
On Sun, Feb 17, 2013 at 04:27:18PM +0100, Rafael J. Wysocki wrote:
From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
Make the ACPI memory hotplug driver use struct acpi_scan_handler
for representing the object used to set up ACPI memory hotplug
functionality and to remove hotplug memory ranges and data
structures used by the driver before unregistering ACPI device
nodes representing memory. Register the new struct acpi_scan_handler
object with the help of acpi_scan_add_handler_with_hotplug() to allow
user space to manipulate the attributes of the memory hotplug
profile.
Let's consider an example where we want acpi memory device ejection to be safely
handled by userspace. We do the following:
echo 0 > /sys/firmware/acpi/hotplug/memory/autoeject
echo 1 > /sys/firmware/acpi/hotplug/memory/uevents
We succesfully hotplug acpi device:
/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00
and its corresponding memblocks /sys/devices/system/memory/memoryXX are
also successfully onlined.
On an eject request, since uevents == 1, the kernel will emit KOBJ_OFFLINE for:
/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00
Can userspace know which memblocks in /sys/devices/system/memory/memoryXX/
correspond to the acpi device /sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:00 ?
This will be needed so that userspace tries to offline the memblocks (and only
if successful, issue the eject operation on the acpi device). As far as I see,
we don't create any sysfs links or files for this scenario - can userspace get
this info somehow?
/sys/devices/system/memory/memoryXX/phys_device needs to be properly implemented
for this to work I think, see Documentation/ABI/testing/sysfs-memory
The following test patch works toward that direction. Let me know if it's of
interest or if there are better ideas /comments.
How about use ../PNP0C80:00/physical_node/resources file?
In my system, the file shows following information.
$ cat /sys/bus/acpi/devices/PNP0C80\:00/physical_node/resources
state = active
mem 0x0-0x80000000
mem 0x100000000-0x800000000
It means PNP0C80:00's memory ranges are "0x0-0x7fffffff" and
"0x100000000-0x7ffffffff". In x86 architecture, memory section size is
128MiB. So, if these memory range is divided by 128MiB, you can
calculate memory section number as follow:
0x0-0x7fffffff => 0x0-0x10
0x100000000-0x7ffffffff => 0x20-0xff
But there is one problem. The problem is that resources file of added memory
is not created. If the problem is fixed, I think you can use the way.
From: Vasilis Liaskovitis <vasilis.liaskovitis@xxxxxxxxxxxxxxxx>
Date: Tue, 19 Feb 2013 18:36:25 +0100
Subject: [RFC PATCH] acpi / memory-hotplug: implement phys_device
In order for userspace to know which memblocks in:
/sys/devices/system/memory/memoryXX correspond to which acpi memory devices in:
/sys/devices/LNXSYSTM:00/LNXSYSBUS:00/PNP0C80:YY,
/sys/devices/system/memory/memoryXX/phys_device should return a name (or index
YY) of the memory device each memblock XX belongs to.
WIth this patch, the acpi mem_hotplug driver keeps a global list of acpi memory
devices (inserted in hotplug_order). The base memory driver checks against this
list in arch_get_memory_phys_device to determine the zero-based index of the
physical memory device each new memblock belongs to.
For initial memory or for non-acpi/hotplug enabled systems, phys_device is
always -1.
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@xxxxxxxxxxxxxxxx>
---
Documentation/ABI/testing/sysfs-devices-memory | 8 ++++++-
drivers/acpi/acpi_memhotplug.c | 27 ++++++++++++++++++++++++
drivers/base/memory.c | 7 +++++-
include/linux/acpi.h | 2 +
4 files changed, 42 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 7405de2..290c62a 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -27,7 +27,13 @@ Contact: Badari Pulavarty <pbadari@xxxxxxxxxx>
Description:
The file /sys/devices/system/memory/memoryX/phys_device
is read-only and is designed to show the name of physical
- memory device. Implementation is currently incomplete.
+ memory device. Implementation is currently incomplete. In a
+ system with CONFIG_ACPI_HOTPLUG_MEMORY=n, phys_device is always
+ -1. In a system with CONFIG_ACPI_HOTPLUG_MEMORY=y, phys_device
+ is -1 for all initial / non-hot-removable memory. For
+ memory that has been hot-plugged, phys_device will return the
+ zero-based index of the physical device that this memory block
+ belongs to. Indices are determined by hotplug order.
What: /sys/devices/system/memory/memoryX/phys_index
Date: September 2008
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 3be9501..4154dc5 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -48,6 +48,7 @@ ACPI_MODULE_NAME("acpi_memhotplug");
#define MEMORY_POWER_ON_STATE 1
#define MEMORY_POWER_OFF_STATE 2
+static LIST_HEAD(acpi_mem_device_list);
static int acpi_memory_device_add(struct acpi_device *device,
const struct acpi_device_id *not_used);
static void acpi_memory_device_remove(struct acpi_device *device);
@@ -81,6 +82,7 @@ struct acpi_memory_device {
struct acpi_device * device;
unsigned int state; /* State of the memory device */
struct list_head res_list;
+ struct list_head mem_device_list;
};
static acpi_status
@@ -287,6 +289,7 @@ static int acpi_memory_device_add(struct acpi_device *device,
return -ENOMEM;
INIT_LIST_HEAD(&mem_device->res_list);
+ INIT_LIST_HEAD(&mem_device->mem_device_list);
mem_device->device = device;
sprintf(acpi_device_name(device), "%s", ACPI_MEMORY_DEVICE_NAME);
sprintf(acpi_device_class(device), "%s", ACPI_MEMORY_DEVICE_CLASS);
@@ -308,9 +311,11 @@ static int acpi_memory_device_add(struct acpi_device *device,
return 0;
}
+ list_add_tail(&mem_device->mem_device_list, &acpi_mem_device_list);
result = acpi_memory_enable_device(mem_device);
if (result) {
dev_err(&device->dev, "acpi_memory_enable_device() error\n");
+ list_del(&mem_device->mem_device_list);
acpi_memory_device_free(mem_device);
return -ENODEV;
}
@@ -328,9 +333,31 @@ static void acpi_memory_device_remove(struct acpi_device *device)
mem_device = acpi_driver_data(device);
acpi_memory_remove_memory(mem_device);
+ list_del(&mem_device->mem_device_list);
acpi_memory_device_free(mem_device);
}
+int acpi_memory_phys_device(unsigned long start_pfn)
+{
+ struct acpi_memory_device *mem_dev;
+ struct acpi_memory_info *info;
+ unsigned long start_addr = start_pfn << PAGE_SHIFT;
+ int id = 0;
+
+ list_for_each_entry(mem_dev, &acpi_mem_device_list, mem_device_list) {
+ list_for_each_entry(info, &mem_dev->res_list, list) {
+ if ((info->start_addr <= start_addr) &&
+ (info->start_addr + info->length > start_addr))
+ return id;
+ }
+ id++;
+ }
I don't think this solve your problem.
When hot adding memory device in my system, consecutive index number is
applied to PNP0C80 as follows:
$ ls /sys/bus/acpi/devices/ |grep PNP0C80
PNP0C80:00
PNP0C80:01 => hot added memory device
PNP0C80:02 => hot added memory device
In this case, we can know PNP0C80:YY by memoryXX/phys_device file.
But if hot removing and adding the same device, index number is changed
as follows:
$ ls /sys/bus/acpi/devices/
PNP0C80:00
PNP0C80:03 => hot added memory device
PNP0C80:04 => hot added memory device
In this case, we cannot know PNP0C80:YY by memoryXX/phys_device file.
Thanks,
Yasuaki Ishimatsu
+
+ /* Memory not associated with a hot-pluggable device gets -1. For
+ * example, initial memory. */
+ return -1;
+}
+
void __init acpi_memory_hotplug_init(void)
{
acpi_scan_add_handler_with_hotplug(&memory_device_handler, "memory");
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 8300a18..2cc98df 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -22,6 +22,7 @@
#include <linux/mutex.h>
#include <linux/stat.h>
#include <linux/slab.h>
+#include <linux/acpi.h>
#include <linux/atomic.h>
#include <asm/uaccess.h>
@@ -522,7 +523,11 @@ static inline int memory_fail_init(void)
*/
int __weak arch_get_memory_phys_device(unsigned long start_pfn)
{
- return 0;
+#ifdef CONFIG_ACPI_HOTPLUG_MEMORY
+ return acpi_memory_phys_device(start_pfn);
+#else
+ return -1;
+#endif
}
/*
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index f46cfd7..00302fc 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -562,6 +562,8 @@ static inline __printf(3, 4) void
acpi_handle_printk(const char *level, void *handle, const char *fmt, ...) {}
#endif /* !CONFIG_ACPI */
+int acpi_memory_phys_device(unsigned long start_pfn);
+
/*
* acpi_handle_<level>: Print message with ACPI prefix and object path
*
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
