Hi all, The discussion that lead to this patch series starts from the below thread: http://thread.gmane.org/gmane.linux.kernel/1417691 In summary, there is no point in adding a special case code to the drivers in order to pass them a fixed clock rate, but instead x86 should just enable common clk subsystem and take advantage of it. This has been proposed before by Mark Brown but for some reason it has not merged into x86 tree. This series tries to do the same but in this time we have real users for the clk API. [1/3] Enables the common clk framework on x86 [2/3] Adds Intel Lynxpoint Low Power Subsystem specific clocks as platform driver. [3/3] Creates the platform device for the LPSS clocks driver if we find out that the Lynxpoint LPSS devices are available. This series is based on Rafael's linux-pm/linux-next branch because there is a dependency to the ACPI scan rework by Rafael. Please review. Mika Westerberg (3): x86: enable common clk on x86 clk: x86: add support for Lynxpoint LPSS clocks ACPI: create Lynxpoint clocks if LPSS devices are found during scan arch/x86/Kconfig | 1 + drivers/acpi/scan.c | 36 ++++++++++++---- drivers/clk/Makefile | 1 + drivers/clk/x86/Makefile | 2 + drivers/clk/x86/clk-lpss.c | 99 ++++++++++++++++++++++++++++++++++++++++++++ drivers/clk/x86/clk-lpss.h | 36 ++++++++++++++++ drivers/clk/x86/clk-lpt.c | 86 ++++++++++++++++++++++++++++++++++++++ 7 files changed, 252 insertions(+), 9 deletions(-) create mode 100644 drivers/clk/x86/Makefile create mode 100644 drivers/clk/x86/clk-lpss.c create mode 100644 drivers/clk/x86/clk-lpss.h create mode 100644 drivers/clk/x86/clk-lpt.c -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
