For ODDs, the upper layer will poll for media change every few
seconds, which will make it enter and leave suspend state very
often. And as each suspend will also cause a hard/soft reset,
the gain of runtime suspend is very little while the ODD may
malfunction after constantly being reset. So the idle callback
here will not proceed to suspend if a non-ZPODD capable ODD is
attached to the port.
Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx>
---
drivers/ata/libata-core.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 65a362e..5f9de1c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5408,8 +5408,27 @@ static int ata_port_resume(struct device *dev)
return rc;
}
+/*
+ * For ODDs, the upper layer will poll for media change every few seconds,
+ * which will make it enter and leave suspend state every few seconds. And
+ * as each suspend will cause a hard/soft reset, the gain of runtime suspend
+ * is very little and the ODD may malfunction after constantly being reset.
+ * So the idle callback here will not proceed to suspend if a non-ZPODD capable
+ * ODD is attached to the port.
+ */
static int ata_port_runtime_idle(struct device *dev)
{
+ struct ata_port *ap = to_ata_port(dev);
+ struct ata_link *link;
+ struct ata_device *adev;
+
+ ata_for_each_link(link, ap, HOST_FIRST) {
+ ata_for_each_dev(adev, link, ENABLED)
+ if (adev->class == ATA_DEV_ATAPI &&
+ !zpodd_dev_enabled(adev))
+ return -EBUSY;
+ }
+
return pm_runtime_suspend(dev);
}
--
1.7.11.7
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
