On Thu, 2012-12-13 at 04:16 +0000, Greg KH wrote:
> On Wed, Dec 12, 2012 at 08:37:44PM -0700, Toshi Kani wrote:
> > On Wed, 2012-12-12 at 16:55 -0800, Greg KH wrote:
> > > On Wed, Dec 12, 2012 at 05:39:36PM -0700, Toshi Kani wrote:
> > > > On Wed, 2012-12-12 at 15:56 -0800, Greg KH wrote:
> > > > > On Wed, Dec 12, 2012 at 04:17:12PM -0700, Toshi Kani wrote:
> > > > > > This patchset is an initial prototype of proposed hot-plug framework
> > > > > > for design review. The hot-plug framework is designed to provide
> > > > > > the common framework for hot-plugging and online/offline operations
> > > > > > of system devices, such as CPU, Memory and Node. While this patchset
> > > > > > only supports ACPI-based hot-plug operations, the framework itself is
> > > > > > designed to be platform-neural and can support other FW architectures
> > > > > > as necessary.
> > > > > >
> > > > > > The patchset has not been fully tested yet, esp. for memory hot-plug.
> > > > > > Any help for testing will be very appreciated since my test setup
> > > > > > is limited.
> > > > > >
> > > > > > The patchset is based on the linux-next branch of linux-pm.git tree.
> > > > > >
> > > > > > Overview of the Framework
> > > > > > =========================
> > > > >
> > > > > <snip>
> > > > >
> > > > > Why all the new framework, doesn't the existing bus infrastructure
> > > > > provide everything you need here? Shouldn't you just be putting your
> > > > > cpus and memory sticks on a bus and handle stuff that way? What makes
> > > > > these types of devices so unique from all other devices that Linux has
> > > > > been handling in a dynamic manner (i.e. hotplugging them) for many many
> > > > > years?
> > > > >
> > > > > Why are you reinventing the wheel?
> > > >
> > > > Good question. Yes, USB and PCI hotplug operate based on their bus
> > > > structures. USB and PCI cards only work under USB and PCI bus
> > > > controllers. So, their framework can be composed within the bus
> > > > structures as you pointed out.
> > > >
> > > > However, system devices such CPU and memory do not have their standard
> > > > bus. ACPI allows these system devices to be enumerated, but it does not
> > > > make ACPI as the HW bus hierarchy for CPU and memory, unlike PCI and
> > > > USB. Therefore, CPU and memory modules manage CPU and memory outside of
> > > > ACPI. This makes sense because CPU and memory can be used without ACPI.
> > > >
> > > > This leads us an issue when we try to manage system device hotplug
> > > > within ACPI, because ACPI does not control everything. This patchset
> > > > provides a common hotplug framework for system devices, which both ACPI
> > > > and non-ACPI modules (i.e. CPU and memory modules) can participate and
> > > > are coordinated for their hotplug operations. This is analogous to the
> > > > boot-up sequence, which ACPI and non-ACPI modules can participate to
> > > > enable CPU and memory.
> > >
> > > Then create a "virtual" bus and put the devices you wish to control on
> > > that. That is what the "system bus" devices were supposed to be, it's
> > > about time someone took that code and got it all working properly in
> > > this way, that is why it was created oh so long ago.
> >
> > It may be the ideal, but it will take us great effort to make such
> > things to happen based on where we are now. It is going to be a long
> > way. I believe the first step is to make the boot-up flow and hot-plug
> > flow consistent for system devices. This is what this patchset is
> > trying to do.
>
> If you use the system "bus" for this, the "flow" will be identical, that
> is what the driver core provides for you. I don't see why you need to
> implement something that sits next to it and not just use what we
> already have here.
Here is very brief boot-up flow.
start_kernel()
boot_cpu_init() // init cpu0
setup_arch()
x86_init.paging.pagetable_init() // init mem pagetable
:
kernel_init()
kernel_init_freeable()
smp_init() // init other CPUs
:
do_basic_setup()
driver_init()
cpu_dev_init() // build system/cpu tree
memory_dev_init() // build system/memory tree
do_initcalls()
acpi_init() // build ACPI device tree
CPU and memory are initialized at early boot. The system device tree is
built at the last step of the boot sequence and is only used for
providing sysfs interfaces. That is, the system bus structure has
nothing to do with the actual CPU and memory initialization at boot.
Similarly, ACPI drivers do not initialize actual CPU and memory at boot
as they are also called at the last step. Further, the ACPI device tree
and system bus tree are separate entities. Hotplug events are sent to
ACPI.
In order to keep the boot flow and hotplug flow consistent, I believe
the first step is to keep the role of modules consistent between boot
and hotplug. For instance, acpi_init() only builds ACPI tree at boot,
so ACPI should only build ACPI tree at hot-add as well. This keeps ACPI
drivers to do the same for both boot and hot-add. The framework is
designed to provide the consistency along with other high-availability
features such as rollback.
Thanks,
-Toshi
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
