Some MSI laptop BIOSes are broken - INT 15h code uses port 92h to enable A20 line but resume code assumes that KBC was used. The laptop will not resume from S3 otherwise but powers off after a while and then powers on again stuck with a blank screen. Fix it by enabling A20 using KBC in i8042_platform_init for x86. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=12878 Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx> --- drivers/input/serio/i8042-x86ia64io.h | 9 +++++++++ 1 files changed, 9 insertions(+), 0 deletions(-) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index d6cc77a..5f306f7 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -921,6 +921,7 @@ static int __init i8042_platform_init(void) int retval; #ifdef CONFIG_X86 + u8 a20_on = 0xdf; /* Just return if pre-detection shows no i8042 controller exist */ if (!x86_platform.i8042_detect()) return -ENODEV; @@ -960,6 +961,14 @@ static int __init i8042_platform_init(void) if (dmi_check_system(i8042_dmi_dritek_table)) i8042_dritek = true; + + /* + * A20 was already enabled during early kernel init. But some buggy + * BIOSes (in MSI Laptops) require A20 to be enabled using 8042 to + * resume from S3. So we do it here and hope that nothing breaks. + */ + i8042_command(&a20_on, 0x10d1); + i8042_command(NULL, 0x00ff); /* Null command for SMM firmware */ #endif /* CONFIG_X86 */ return retval; -- Ondrej Zary -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
