[ Note: this is a follow-up on https://bugzilla.kernel.org/show_bug.cgi?id=41062; in particular, check comments #4, #19, and #21 ] Please find below a patch to drivers/acpi/battery.c that adds a quirk to correctly report battery capacity on 2010 and 2011 Lenovo Thinkpad models. I think the patch is ready to be applied (Len: please apply). However, since it specifically affects Thinkpads, I've copied ibm-acpi-devel ML on this message to give them a chance to provide input, if any. The affected models that I tested (x201, t410, t410s, and x220) exhibit a problem where, when battery capacity reporting unit is mAh, the values being reported are wrong. Pre-2010 and 2012 models appear to always report in mWh and are thus unaffected. Also, in mid-2012 Lenovo issued a BIOS update for the 2011 models that fixes the issue (tested on x220 with a post-1.29 BIOS). No such update is available for the 2010 models, so those still need this patch. Problem description: for some reason, the affected Thinkpads switch the reporting unit between mAh and mWh; generally, mAh is used when a laptop is plugged in and mWh when it's unplugged, although a suspend/resume or rmmod/modprobe is needed for the switch to take effect. The values reported in mAh are *always* wrong. This does not appear to be a kernel regression; I believe that the values were never reported correctly. I tested back to kernel 2.6.34, with multiple machines and BIOS versions. Simply plugging a laptop into mains before turning it on is enough to reproduce the problem. Here's a sample /proc/acpi/battery/BAT0/info from Thinkpad x220 (before a BIOS update) with a 4-cell battery: present: yes design capacity: 2886 mAh last full capacity: 2909 mAh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 145 mAh design capacity low: 13 mAh cycle count: 0 capacity granularity 1: 1 mAh capacity granularity 2: 1 mAh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Once the laptop switches the unit to mWh (unplug from mains, suspend, resume), the output changes to: present: yes design capacity: 28860 mWh last full capacity: 29090 mWh battery technology: rechargeable design voltage: 14800 mV design capacity warning: 1454 mWh design capacity low: 200 mWh cycle count: 0 capacity granularity 1: 1 mWh capacity granularity 2: 1 mWh model number: 42T4899 serial number: 21064 battery type: LION OEM info: SANYO Can you see how the values for "design capacity", etc., differ by a factor of 10 instead of 14.8 (the design voltage of this battery)? On the battery itself it says: 14.8V, 1.95Ah, 29Wh, so clearly the values reported in mWh are correct and the ones in mAh are not. My guess is that this problem has been around ever since those machines have been released, but because the most common Thinkpad batteries are rated at 10.8V, the error (8%) is small enough that it simply hasn't been noticed or at least nobody could be bothered to look into it. My patch works around the problem by adjusting the incorrectly reported mAh values by "10000 / design_voltage". The patch also has code to figure out if it should be activated or not. It only activates on Lenovo Thinkpads, only when the unit is mAh, and, as an extra precaution, only when the battery capacity reported through ACPI does not match what is reported through DMI (I've never encountered a machine where the first two conditions would be true but the last would not, but better safe than sorry). I've been using this patch for close to a year on several systems without any problems. I believe it is ready to be applied, although I lack kernel hacking experience to make that determination. The patch was generated agains 3.7-rc5. Note that I'm not on either list so I would appreciate a Cc on any replies. I will also try to monitor the list archives. Kamil Iskra --- battery.c.orig 2012-11-11 06:44:33.000000000 -0600 +++ battery.c 2012-11-11 20:03:01.589851544 -0600 @@ -34,6 +34,7 @@ #include <linux/dmi.h> #include <linux/slab.h> #include <linux/suspend.h> +#include <asm/unaligned.h> #ifdef CONFIG_ACPI_PROCFS_POWER #include <linux/proc_fs.h> @@ -95,6 +96,18 @@ enum { ACPI_BATTERY_ALARM_PRESENT, ACPI_BATTERY_XINFO_PRESENT, ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, + /* On Lenovo Thinkpad models from 2010 and 2011, the power unit + switches between mWh and mAh depending on whether the system + is running on battery or not. When mAh is the unit, most + reported values are incorrect and need to be adjusted by + 10000/design_voltage. Verified on x201, t410, t410s, and x220. + Pre-2010 and 2012 models appear to always report in mWh and + are thus unaffected (tested with t42, t61, t500, x200, x300, + and x230). Also, in mid-2012 Lenovo issued a BIOS update for + the 2011 models that fixes the issue (tested on x220 with a + post-1.29 BIOS), but as of Nov. 2012, no such update is + available for the 2010 models. */ + ACPI_BATTERY_QUIRK_THINKPAD_MAH, }; struct acpi_battery { @@ -438,6 +451,21 @@ static int acpi_battery_get_info(struct kfree(buffer.pointer); if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) battery->full_charge_capacity = battery->design_capacity; + if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && + battery->power_unit && battery->design_voltage) { + battery->design_capacity = battery->design_capacity * + 10000 / battery->design_voltage; + battery->full_charge_capacity = battery->full_charge_capacity * + 10000 / battery->design_voltage; + battery->design_capacity_warning = + battery->design_capacity_warning * + 10000 / battery->design_voltage; + /* Curiously, design_capacity_low, unlike the rest of them, + is correct. */ + /* capacity_granularity_* equal 1 on the systems tested, so + it's impossible to tell if they would need an adjustment + or not if their values were higher. */ + } return result; } @@ -486,6 +514,11 @@ static int acpi_battery_get_state(struct && battery->capacity_now >= 0 && battery->capacity_now <= 100) battery->capacity_now = (battery->capacity_now * battery->full_charge_capacity) / 100; + if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && + battery->power_unit && battery->design_voltage) { + battery->capacity_now = battery->capacity_now * + 10000 / battery->design_voltage; + } return result; } @@ -595,6 +628,24 @@ static void sysfs_remove_battery(struct mutex_unlock(&battery->sysfs_lock); } +static void find_battery(const struct dmi_header *dm, void *private) +{ + struct acpi_battery *battery = (struct acpi_battery *)private; + /* Note: the hardcoded offsets below have been extracted from + the source code of dmidecode. */ + if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) { + const u8 *dmi_data = (const u8 *)(dm + 1); + int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6)); + if (dm->length >= 18) + dmi_capacity *= dmi_data[17]; + if (battery->design_capacity * battery->design_voltage / 1000 + != dmi_capacity && + battery->design_capacity * 10 == dmi_capacity) + set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, + &battery->flags); + } +} + /* * According to the ACPI spec, some kinds of primary batteries can * report percentage battery remaining capacity directly to OS. @@ -620,6 +671,32 @@ static void acpi_battery_quirks(struct a battery->capacity_now = (battery->capacity_now * battery->full_charge_capacity) / 100; } + + if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags)) + return ; + + if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { + const char *s; + s = dmi_get_system_info(DMI_PRODUCT_VERSION); + if (s && !strnicmp(s, "ThinkPad", 8)) { + dmi_walk(find_battery, battery); + if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, + &battery->flags) && + battery->design_voltage) { + battery->design_capacity = + battery->design_capacity * + 10000 / battery->design_voltage; + battery->full_charge_capacity = + battery->full_charge_capacity * + 10000 / battery->design_voltage; + battery->design_capacity_warning = + battery->design_capacity_warning * + 10000 / battery->design_voltage; + battery->capacity_now = battery->capacity_now * + 10000 / battery->design_voltage; + } + } + } } static int acpi_battery_update(struct acpi_battery *battery) -- Kamil Iskra kamil@xxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
