On Fri, Sep 28, 2012 at 03:37:43PM +0800, Zhang Rui wrote: > > the main idea is that, for Serial Buses like I2C and SPI, we enumerate > the controller as a platform device, and then enumerate the slaves via > i2c/spi_register_board_info. And then, when the controller is really > probed and enabled in the platform driver, the SPI/I2C bus code will > enumerate I2C/SPI slaves automatically. > And for the other devices, we will enumerate all of them as platform > devices, which is not covered in this patch set yet. Can you show some example how we could use this new code for example with an existing I2C/SPI slave driver? Let's say the device uses few GPIOs, one for interrupt and other for triggering firmware download. In addition to that it needs a special parameters that can be extracted running the "_DSM" method of the device. Normally the driver would get this stuff from the platform data or from Device Tree but how it is done with these patches? -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
