Re: [PATCH v3 7/8] ACPI, PCI: add hostbridge removal function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 27, 2012 at 6:15 PM, Taku Izumi <izumi.taku@xxxxxxxxxxxxxx> wrote:
> On Thu, 27 Sep 2012 10:48:09 -0600
> Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
>
>> On Fri, Sep 21, 2012 at 2:09 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote:
>> > On Tue, Sep 18, 2012 at 12:25 AM, Taku Izumi <izumi.taku@xxxxxxxxxxxxxx> wrote:
>> >>
>> >> Currently there's no PCI-related clean-up code
>> >> in acpi_pci_root_remove() function.
>> >> This patch introduces function for hostbridge removal,
>> >> and brings back pci_stop_bus_devices() function.
>> >>
>> >> Signed-off-by: Taku Izumi <izumi.taku@xxxxxxxxxxxxxx>
>> >> ---
>> >>  drivers/acpi/pci_bind.c     |    7 +++++++
>> >>  drivers/acpi/pci_root.c     |    7 +++++++
>> >>  drivers/pci/remove.c        |   27 +++++++++++++++++++++++++++
>> >>  include/acpi/acpi_drivers.h |    1 +
>> >>  include/linux/pci.h         |    2 ++
>> >>  5 files changed, 44 insertions(+)
>> >>
>> >> Index: Bjorn-next-0903/drivers/pci/remove.c
>> >> ===================================================================
>> >> --- Bjorn-next-0903.orig/drivers/pci/remove.c
>> >> +++ Bjorn-next-0903/drivers/pci/remove.c
>> >> @@ -92,3 +92,30 @@ void pci_stop_and_remove_bus_device(stru
>> >>         pci_destroy_dev(dev);
>> >>  }
>> >>  EXPORT_SYMBOL(pci_stop_and_remove_bus_device);
>> >> +
>> >> +void pci_stop_bus_devices(struct pci_bus *bus)
>> >> +{
>> >> +       struct pci_dev *dev, *tmp;
>> >> +
>> >> +       list_for_each_entry_safe_reverse(dev, tmp, &bus->devices, bus_list) {
>> >> +               if (dev->subordinate)
>> >> +                       pci_stop_bus_devices(dev->subordinate);
>> >> +               pci_stop_dev(dev);
>> >> +       }
>> >> +
>> >> +}
>> >> +EXPORT_SYMBOL(pci_stop_bus_devices);
>> >> +
>> >> +void pci_remove_host_bridge(struct pci_host_bridge *bridge)
>> >> +{
>> >> +       struct pci_bus *root = bridge->bus;
>> >> +       struct pci_dev *dev, *tmp;
>> >> +
>> >> +       list_for_each_entry_safe_reverse(dev, tmp, &root->devices, bus_list)
>> >> +               pci_stop_and_remove_bus_device(dev);
>> >> +
>> >> +       pci_remove_bus(root);
>> >> +
>> >> +       device_unregister(&bridge->dev);
>> >> +}
>> >> +EXPORT_SYMBOL(pci_remove_host_bridge);
>> >> Index: Bjorn-next-0903/drivers/acpi/pci_root.c
>> >> ===================================================================
>> >> --- Bjorn-next-0903.orig/drivers/acpi/pci_root.c
>> >> +++ Bjorn-next-0903/drivers/acpi/pci_root.c
>> >> @@ -652,8 +652,10 @@ static int acpi_pci_root_remove(struct a
>> >>  {
>> >>         struct acpi_pci_root *root = acpi_driver_data(device);
>> >>         struct acpi_pci_driver *driver;
>> >> +       struct pci_host_bridge *bridge = to_pci_host_bridge(root->bus->bridge);
>> >>
>> >>         mutex_lock(&acpi_pci_root_lock);
>> >> +       pci_stop_bus_devices(root->bus);
>> >>         list_for_each_entry(driver, &acpi_pci_drivers, node)
>> >>                 if (driver->remove)
>> >>                         driver->remove(root);
>> >> @@ -661,6 +663,11 @@ static int acpi_pci_root_remove(struct a
>> >>         device_set_run_wake(root->bus->bridge, false);
>> >>         pci_acpi_remove_bus_pm_notifier(device);
>> >>
>> >> +       acpi_pci_irq_del_prt(root->bus);
>> >
>> > acpi_pci_irq_del_prt() does not actually have a dependency on the
>> > struct pci_bus, so I think its interface should be changed so it takes
>> > a segment number and a bus number instead of the "struct pci_bus *".
>> > The same applies to acpi_pci_irq_add_prt().
>> >
>> > This basically boils down to reverting 859a3f86ca8 and d9efae3688a.  I
>> > acked those changes at the time, but I think they were a mistake.  The
>> > reason is that passing in the struct pci_bus * ties them into the host
>> > bridge add/remove flow in a way that's not necessary.
>> >
>> > If we get rid of the struct pci_bus * dependency, then we can easily
>> > add the _PRT before doing PCI enumeration behind the bridge, and we
>> > can remove the _PRT after removing the PCI devices.  I think this is
>> > one small step toward getting rid of the add/start and stop/remove
>> > split.
>>
>> I'm going to work on doing this if nobody else is interested.
>
>   I'll do that. Maybee that is separeted from this patchset.

Great, thanks!  A separate patchset is definitely fine.

>> >> +       acpi_pci_unbind_root(device);
>> >> +
>> >> +       pci_remove_host_bridge(bridge);
>> >> +
>> >>         list_del(&root->node);
>> >>         mutex_unlock(&acpi_pci_root_lock);
>> >>         kfree(root);
>> >> Index: Bjorn-next-0903/include/linux/pci.h
>> >> ===================================================================
>> >> --- Bjorn-next-0903.orig/include/linux/pci.h
>> >> +++ Bjorn-next-0903/include/linux/pci.h
>> >> @@ -734,6 +734,8 @@ extern struct pci_dev *pci_dev_get(struc
>> >>  extern void pci_dev_put(struct pci_dev *dev);
>> >>  extern void pci_remove_bus(struct pci_bus *b);
>> >>  extern void pci_stop_and_remove_bus_device(struct pci_dev *dev);
>> >> +extern void pci_stop_bus_devices(struct pci_bus *bus);
>> >> +extern void pci_remove_host_bridge(struct pci_host_bridge *bridge);
>> >>  void pci_setup_cardbus(struct pci_bus *bus);
>> >>  extern void pci_sort_breadthfirst(void);
>> >>  #define dev_is_pci(d) ((d)->bus == &pci_bus_type)
>> >> Index: Bjorn-next-0903/drivers/acpi/pci_bind.c
>> >> ===================================================================
>> >> --- Bjorn-next-0903.orig/drivers/acpi/pci_bind.c
>> >> +++ Bjorn-next-0903/drivers/acpi/pci_bind.c
>> >> @@ -118,3 +118,10 @@ int acpi_pci_bind_root(struct acpi_devic
>> >>
>> >>         return 0;
>> >>  }
>> >> +
>> >> +void  acpi_pci_unbind_root(struct acpi_device *device)
>> >> +{
>> >> +       device->ops.bind = NULL;
>> >> +       device->ops.unbind = NULL;
>> >> +}
>> >> +
>> >> Index: Bjorn-next-0903/include/acpi/acpi_drivers.h
>> >> ===================================================================
>> >> --- Bjorn-next-0903.orig/include/acpi/acpi_drivers.h
>> >> +++ Bjorn-next-0903/include/acpi/acpi_drivers.h
>> >> @@ -101,6 +101,7 @@ struct pci_bus;
>> >>
>> >>  struct pci_dev *acpi_get_pci_dev(acpi_handle);
>> >>  int acpi_pci_bind_root(struct acpi_device *device);
>> >> +void acpi_pci_unbind_root(struct acpi_device *device);
>> >>
>> >>  /* Arch-defined function to add a bus to the system */
>> >>
>> >>
>>
>
>
> --
> Taku Izumi <izumi.taku@xxxxxxxxxxxxxx>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux