On 09/12/2012 04:29 AM, Aaron Lu wrote:
When ODD is runtime suspended, we will check if it is OK to remove
its power:
1 For tray type, no medium inside and tray closed;
2 For slot type, no medium inside.
And if yes, we will set the ready_to_power_off flag as an indication to
ATA layer that it is safe to place this device into ACPI D3 cold power
state.
And when it is powered off, we will set the powered_off flag so that the
periodically running check_events will not bother this device by simply
return.
Signed-off-by: Aaron Lu <aaron.lu@xxxxxxxxx>
---
drivers/ata/libata-acpi.c | 27 +++++++++++++++--------
drivers/scsi/sr.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/sr.h | 1 +
drivers/scsi/sr_ioctl.c | 7 +++++-
include/scsi/scsi_device.h | 3 +++
5 files changed, 81 insertions(+), 10 deletions(-)
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 902b5a4..9aca057 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -854,7 +854,7 @@ void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
{
struct ata_device *dev;
acpi_handle handle;
- int acpi_state;
+ int acpi_state, ret;
/* channel first and then drives for power on and vica versa
for power off */
@@ -869,17 +869,24 @@ void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
if (state.event != PM_EVENT_ON) {
acpi_state = acpi_pm_device_sleep_state(
- &dev->sdev->sdev_gendev, NULL, ACPI_STATE_D3);
- if (acpi_state > 0)
- acpi_bus_set_power(handle, acpi_state);
- /* TBD: need to check if it's runtime pm request */
- acpi_pm_device_run_wake(
- &dev->sdev->sdev_gendev, true);
+ &dev->sdev->sdev_gendev, NULL,
+ dev->sdev->ready_to_power_off ?
+ ACPI_STATE_D3 : ACPI_STATE_D3_HOT);
+ if (acpi_state > 0) {
+ ret = acpi_bus_set_power(handle, acpi_state);
+ if (!ret && acpi_state == ACPI_STATE_D3)
+ dev->sdev->powered_off = 1;
+
+ /* TODO: check if it's runtime pm request */
+ acpi_pm_device_run_wake(
+ &dev->sdev->sdev_gendev, true);
+ }
} else {
/* Ditto */
acpi_pm_device_run_wake(
&dev->sdev->sdev_gendev, false);
acpi_bus_set_power(handle, ACPI_STATE_D0);
+ dev->sdev->powered_off = 0;
}
}
@@ -985,8 +992,10 @@ static void ata_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
struct ata_device *ata_dev = context;
if (event == ACPI_NOTIFY_DEVICE_WAKE && ata_dev &&
- pm_runtime_suspended(&ata_dev->sdev->sdev_gendev))
- scsi_autopm_get_device(ata_dev->sdev);
+ ata_dev->sdev->powered_off) {
+ ata_dev->sdev->need_eject = 1;
+ pm_runtime_resume(&ata_dev->sdev->sdev_gendev);
+ }
}
these bits are Acked-by: Jeff Garzik <jgarzik@xxxxxxxxxx>
but obviously that is contingent upon acceptance of the upper level SCSI
and ACPI changes.
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
