On Wed, Sep 05, 2012 at 12:08:25PM -0400, Alan Stern wrote: > On Wed, 5 Sep 2012, Aaron Lu wrote: > > > > > > That flag is badly named. Something like "insert_event_during_suspend" > > > > > would be better. > > > > This flag means, the reason the device gets runtime resumed is due to > > user as described by the above situation 2, not by software(e.g. by > > sr_check_events). > > > > I don't quite understand insert_event_during_suspend mean here... > > It means: An insert event occurred while the device was suspended. Thanks, I got it now. > > > > > > And even so I don't see why you wouldn't > > > > > want to suspend for example a drive with an inserted but unopened disk. > > > > > > > > I assume that Aaron wanted to handle the easiest case first. Adding > > > > suspend/resume handling to the open/close routines can be done later. > > > > > > Sure, but this patch blocks that in contrast to just not implementing it. > > > > It's already implemented. I did it in scsi_cd_get/put. > > > > And the reason I didn't allow runtime suspend for medium inside and door > > closed case are: > > 1 ZPODD has a spec and it didn't allow that; > > In theory we should allow runtime suspend in this case too, but leave > the power on. (Although in practice, turning the power off would > probably work even though it may violate the spec.) > Agree. But it's not easy to implement with autosuspend. Please see below. > > 2 It's not easy to implement. Imagine user just inserts a disc, and the > > sr_suspend routine checks that door is closed so that it wants to > > suspend the device. But actually, after user just inserts a disc, he > > definitely wants to use the device, so it's not a good thing to do. And > > if ZPODD is used, the device will be powered off instantly when the door > > is closed, this is not good. > > That's why we have an autosuspend delay. Although for some reason the > SCSI subsystem doesn't use it currently... We need to add a call to > pm_runtime_use_autosuspend() in scsi_sysfs_add_sdev(). Likewise, the > pm_schedule_suspend() call in scsi_runtime_idle() should be changed to > pm_runtime_autosuspend(). And there should be calls to > pm_runtime_set_autosuspend_delay() in the sd and sr drivers. I tried to use autosuspend when preparing the patch, but the fact that the devices will be polled every 2 seconds make it impossible to enter suspend state if the autosuspend delay is larger than that. -Aaron -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
