On Thu, Jul 26, 2012 at 04:41:12PM +0800, Zhang Rui wrote:
> As the active cooling devices can have multiple cooling states,
> we may want only several cooling states for a certain trip point,
> and other cooling states for other active trip points.
>
> To do this, we should be able to describe the cooling device
> behavior for a certain trip point, rather than for the entire thermal zone.
> And when updating thermal zone, we need to check the upper and lower limit
> to make sure the cooling device is set to the proper cooling state.
>
> Note that this patch will not bring any different behavior as
> upper limit is set to max_state and lower limit is set to 0
> in this patch, for now.
>
> Next patch will set these to real values.
>
> Reviewed-by: Rafael J. Wysocki <rjw@xxxxxxx>
> Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
Reviewed-by: Eduardo Valentin <eduardo.valentin@xxxxxx>
> ---
> drivers/thermal/thermal_sys.c | 25 +++++++++++++++++++++----
> 1 file changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
> index 05f42cd..008e2eb 100644
> --- a/drivers/thermal/thermal_sys.c
> +++ b/drivers/thermal/thermal_sys.c
> @@ -41,12 +41,19 @@ MODULE_AUTHOR("Zhang Rui");
> MODULE_DESCRIPTION("Generic thermal management sysfs support");
> MODULE_LICENSE("GPL");
>
> +/*
> + * This structure is used to describe the behavior of
> + * a certain cooling device on a certain trip point
> + * in a certain thermal zone
> + */
> struct thermal_cooling_device_instance {
> int id;
> char name[THERMAL_NAME_LENGTH];
> struct thermal_zone_device *tz;
> struct thermal_cooling_device *cdev;
> int trip;
> + unsigned long upper; /* Highest cooling state for this trip point */
> + unsigned long lower; /* Lowest cooling state for this trip point */
> char attr_name[THERMAL_NAME_LENGTH];
> struct device_attribute attr;
> struct list_head node;
> @@ -800,6 +807,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
> struct thermal_cooling_device_instance *pos;
> struct thermal_zone_device *pos1;
> struct thermal_cooling_device *pos2;
> + unsigned long max_state;
> int result;
>
> if (trip >= tz->trips || (trip < 0 && trip != THERMAL_TRIPS_NONE))
> @@ -824,6 +832,11 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
> dev->tz = tz;
> dev->cdev = cdev;
> dev->trip = trip;
> +
> + cdev->ops->get_max_state(cdev, &max_state);
> + dev->upper = max_state;
> + dev->lower = 0;
> +
> result = get_idr(&tz->idr, &tz->lock, &dev->id);
> if (result)
> goto free_mem;
> @@ -1103,11 +1116,15 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
> cdev->ops->get_max_state(cdev, &max_state);
>
> if (temp >= trip_temp)
> - cur_state = cur_state < max_state ?
> - (cur_state + 1) : max_state;
> + cur_state =
> + cur_state < instance->upper ?
> + (cur_state + 1) :
> + instance->upper;
> else
> - cur_state = cur_state > 0 ?
> - (cur_state - 1) : 0;
> + cur_state =
> + cur_state > instance->lower ?
> + (cur_state - 1) :
> + instance->lower;
>
> cdev->ops->set_cur_state(cdev, cur_state);
> }
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
