於 五，2012-07-27 於 09:21 -0400，Alex Deucher 提到：
> On Fri, Jul 27, 2012 at 12:46 AM, joeyli <jlee@xxxxxxxx> wrote:
> >
> > + * flags
> > + * bits 1:0:
> > + * 0 - Notify(VGA, 0x81) is not used for notification
> > + * 1 - Notify(VGA, 0x81) is used for notification
> >
> > Per the above flags, when we detect bit set to 1, means 0x81 used for radeon-acpi
> > to be a general notification event. My question is: what's the event number for
> > ACPI_VIDEO_NOTIFY_PROBE on this AMD/ATI machine when 0x81 not available for acpi/video?
> >
>
>
> +/* ARG0: ATIF_FUNCTION_GET_SYSTEM_PARAMETERS
> + * ARG1: none
> + * OUTPUT:
> + * WORD - structure size in bytes (includes size field)
> + * DWORD - valid flags mask
> + * DWORD - flags
> + *
> + * OR
> + *
> + * WORD - structure size in bytes (includes size field)
> + * DWORD - valid flags mask
> + * DWORD - flags
> + * BYTE - notify command code
> + *
> + * flags
> + * bits 1:0:
> + * 0 - Notify(VGA, 0x81) is not used for notification
> + * 1 - Notify(VGA, 0x81) is used for notification
> + * 2 - Notify(VGA, n) is used for notification where
> + * n (0xd0-0xd9) is specified in notify command code.
> + * bit 2:
> + * 1 - lid changes not reported though int10
> + */
>
> if bits 1:0 == 0, there is no notify event for radeon. When bits 1:0
> == 1, it uses 0x81; when bits 1:0 == 2 it uses the event number
> specified in the following byte (notify command code) which would be
> something in the 0xd0-0xd9 range.
>
> Alex
Did you mean every time we received 0x81 event in kernel module, we need
access GET_SYSTEM_PARAMETERS to get the flags for distinguish between
ACPI_VIDEO_NOTIFY_PROBE?
Or just need access ONE time when system boot?
I have a machine the GET_SYSTEM_PARAMETERS looks like this:
Method (AF01, 0, NotSerialized) /* ATIF_FUNCTION_GET_SYSTEM_PARAMETERS 0x1 */
{
CreateWordField (ATIB, Zero, SSZE)
CreateDWordField (ATIB, 0x02, VMSK)
CreateDWordField (ATIB, 0x06, FLGS) /* flags bits 1:0 */
Store (0x0A, SSZE) /* structure SIZE fixed */
Store (0x03, VMSK) /* valid flags mask fixed to 0x03 */
Store (One, FLGS) /* FLAGS always set to 1 */
Return (ATIB)
}
Looks like just need access ONE time when system boot because those
return value of AF01 fixed in DSDT.
On this machine doesn't support probe event, I didn't see any event
issued when I plug D-Sub. Does that means those kind of ATI/AMD machines
do NOT support probe notify?
If YES, then we can just direct disable acpi/video driver by radeon-acpi
when we detected FLAGS is 1.
Thanks a lot!
Joey Lee
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
