Remove thermal_zone_device_passive(). And use
thermal_zone_trip_update() and thermal_zone_do_update()
for both active and passive cooling.
Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
---
drivers/thermal/thermal_sys.c | 97 ++++++++++-------------------------------
include/linux/thermal.h | 2 +-
2 files changed, 24 insertions(+), 75 deletions(-)
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index ee10df5..23a5c86 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -730,73 +730,6 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
msecs_to_jiffies(delay));
}
-static void thermal_zone_device_passive(struct thermal_zone_device *tz,
- int temp, int trip_temp, int trip)
-{
- enum thermal_trend trend;
- struct thermal_instance *instance;
- struct thermal_cooling_device *cdev;
- long state, max_state;
-
- /*
- * Above Trip?
- * -----------
- * Calculate the thermal trend (using the passive cooling equation)
- * and modify the performance limit for all passive cooling devices
- * accordingly. Note that we assume symmetry.
- */
- if (temp >= trip_temp) {
- tz->passive = true;
-
- thermal_get_trend(tz, trip, &trend);
-
- /* Heating up? */
- if (trend == THERMAL_TREND_RAISING) {
- list_for_each_entry(instance, &tz->thermal_instances,
- tz_node) {
- if (instance->trip != trip)
- continue;
- cdev = instance->cdev;
- cdev->ops->get_cur_state(cdev, &state);
- cdev->ops->get_max_state(cdev, &max_state);
- if (state++ < max_state)
- cdev->ops->set_cur_state(cdev, state);
- }
- } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */
- list_for_each_entry(instance, &tz->thermal_instances,
- tz_node) {
- if (instance->trip != trip)
- continue;
- cdev = instance->cdev;
- cdev->ops->get_cur_state(cdev, &state);
- cdev->ops->get_max_state(cdev, &max_state);
- if (state > 0)
- cdev->ops->set_cur_state(cdev, --state);
- }
- }
- return;
- }
-
- /*
- * Below Trip?
- * -----------
- * Implement passive cooling hysteresis to slowly increase performance
- * and avoid thrashing around the passive trip point. Note that we
- * assume symmetry.
- */
- list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
- if (instance->trip != trip)
- continue;
- cdev = instance->cdev;
- cdev->ops->get_cur_state(cdev, &state);
- cdev->ops->get_max_state(cdev, &max_state);
- if (state > 0)
- cdev->ops->set_cur_state(cdev, --state);
- if (state == 0)
- tz->passive = false;
- }
-}
-
static void thermal_zone_device_check(struct work_struct *work)
{
struct thermal_zone_device *tz = container_of(work, struct
@@ -1118,7 +1051,7 @@ static void thermal_zone_do_update(struct thermal_zone_device *tz)
}
/*
- * Cooling algorithm for active trip points
+ * Cooling algorithm for both active and passive cooling
*
* 1. if the temperature is higher than a trip point,
* a. if the trend is THERMAL_TREND_RAISING, use higher cooling
@@ -1140,9 +1073,16 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev = NULL;
unsigned long cur_state, max_state;
long trip_temp;
+ enum thermal_trip_type trip_type;
enum thermal_trend trend;
- tz->ops->get_trip_temp(tz, trip, &trip_temp);
+ if (trip == THERMAL_TRIPS_NONE) {
+ trip_temp = tz->forced_passive;
+ trip_type = THERMAL_TRIPS_NONE;
+ } else {
+ tz->ops->get_trip_temp(tz, trip, &trip_temp);
+ tz->ops->get_trip_type(tz, trip, &trip_type);
+ }
if (temp >= trip_temp) {
thermal_get_trend(tz, trip, &trend);
@@ -1163,6 +1103,12 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
cur_state = cur_state > instance->lower ?
(cur_state - 1) : instance->lower;
}
+
+ /* activate a passive thermal instance */
+ if (trip_type == THERMAL_TRIP_PASSIVE &&
+ instance->target == THERMAL_NO_TARGET)
+ tz->passive++;
+
instance->target = cur_state;
cdev->updated = false; /* cooling device needs update */
}
@@ -1179,6 +1125,11 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
cur_state = cur_state > instance->lower ?
(cur_state - 1) : THERMAL_NO_TARGET;
+
+ /* deactivate a passive thermal instance */
+ if (trip_type == THERMAL_TRIP_PASSIVE &&
+ cur_state == THERMAL_NO_TARGET)
+ tz->passive--;
instance->target = cur_state;
cdev->updated = false; /* cooling device needs update */
}
@@ -1235,16 +1186,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
break;
case THERMAL_TRIP_PASSIVE:
if (temp >= trip_temp || tz->passive)
- thermal_zone_device_passive(tz, temp,
- trip_temp, count);
+ thermal_zone_trip_update(tz, count, temp);
break;
}
}
- thermal_zone_do_update(tz);
if (tz->forced_passive)
- thermal_zone_device_passive(tz, temp, tz->forced_passive,
- THERMAL_TRIPS_NONE);
+ thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE, temp);
+ thermal_zone_do_update(tz);
leave:
if (tz->passive)
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 3e66214..06fd04d 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -121,7 +121,7 @@ struct thermal_zone_device {
int polling_delay;
int temperature;
int last_temperature;
- bool passive;
+ int passive;
unsigned int forced_passive;
const struct thermal_zone_device_ops *ops;
struct list_head thermal_instances;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
