On Thu, 19 Jul 2012 14:31:11 +0800
Zhang Rui <rui.zhang@xxxxxxxxx> wrote:
> tc1 and tc2 are used by OSPM to anticipate the temperature trends.
> But they are ACPI platform specific concepts.
>
> Introduce .get_trend() as a more general solution.
>
> Signed-off-by: Zhang Rui <rui.zhang@xxxxxxxxx>
> ---
> drivers/acpi/thermal.c | 30 ++++++++++++++++++++++++++++++
> drivers/thermal/thermal_sys.c | 19 +++++++++++++++++--
> include/linux/thermal.h | 9 +++++++++
> 3 files changed, 56 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
> index a7c97f5..b345646 100644
> --- a/drivers/acpi/thermal.c
> +++ b/drivers/acpi/thermal.c
> @@ -704,6 +704,35 @@ static int thermal_get_crit_temp(struct
> thermal_zone_device *thermal, return -EINVAL;
> }
>
> +static int thermal_get_trend(struct thermal_zone_device *thermal,
> + int trip, enum thermal_trend *trend)
> +{
> + struct acpi_thermal *tz = thermal->devdata;
> + enum thermal_trip_type type;
> + unsigned long trip_temp;
> + int i;
> +
> + if (thermal_get_trip_type(thermal, trip, &type))
> + return -EINVAL;
> +
> + /* Only PASSIVE trip points need TREND */
> + if (type != THERMAL_TRIP_PASSIVE)
> + return -EINVAL;
> +
> + /*
> + * tz->temperature has already been updated by generic
> thermal layer,
> + * before this callback being invoked
> + */
> + i = (tz->trips.passive.tc1 * (tz->temperature -
> tz->last_temperature))
> + + (tz->trips.passive.tc2
> + * (tz->temperature - tz->trips.passive.temperature));
> +
> + *trend = i > 0 ? THERMAL_TREND_RAISING :
> + (i < 0 ? THERMAL_TREND_DROPPING :
> THERMAL_TREND_STABLE);
> + return 0;
> +}
> +
> +
> static int thermal_notify(struct thermal_zone_device *thermal, int
> trip, enum thermal_trip_type trip_type)
> {
> @@ -832,6 +861,7 @@ static const struct thermal_zone_device_ops
> acpi_thermal_zone_ops = { .get_trip_type = thermal_get_trip_type,
> .get_trip_temp = thermal_get_trip_temp,
> .get_crit_temp = thermal_get_crit_temp,
> + .get_trend = thermal_get_trend,
> .notify = thermal_notify,
> };
>
> diff --git a/drivers/thermal/thermal_sys.c
> b/drivers/thermal/thermal_sys.c index db35300..29b6dba 100644
> --- a/drivers/thermal/thermal_sys.c
> +++ b/drivers/thermal/thermal_sys.c
> @@ -698,6 +698,18 @@ thermal_remove_hwmon_sysfs(struct
> thermal_zone_device *tz) }
> #endif
>
> +static void thermal_get_trend(struct thermal_zone_device *tz,
> + int trip, enum thermal_trend *trend)
> +{
> + if (tz->ops->get_trend)
> + if (!tz->ops->get_trend(tz, trip, trend))
> + return;
> +
> + *trend = tz->temperature >= tz->last_temperature ?
> + THERMAL_TREND_RAISING : THERMAL_TREND_DROPPING;
I think you are mixing things a little here. ACPI passive cooling
formula generates a performance trend to guide thermal management,
which is not a simple temperature trend.
In case of no .get_trend() present, caller can easily figure out
temperature trend explicitly instead of getting uninformed information.
> + return;
> +}
> +
> static void thermal_zone_device_set_polling(struct
> thermal_zone_device *tz, int delay)
> {
> @@ -732,6 +744,8 @@ static void thermal_zone_device_passive(struct
> thermal_zone_device *tz, if (temp >= trip_temp) {
> tz->passive = true;
>
> + thermal_get_trend(tz, trip, (enum thermal_trend
> *)&trend); +
> trend = (tz->tc1 * (temp - tz->last_temperature)) +
> (tz->tc2 * (temp - trip_temp));
>
> @@ -1090,6 +1104,9 @@ void thermal_zone_device_update(struct
> thermal_zone_device *tz) goto leave;
> }
>
> + tz->last_temperature = tz->temperature;
> + tz->temperature = temp;
> +
> for (count = 0; count < tz->trips; count++) {
> tz->ops->get_trip_type(tz, count, &trip_type);
> tz->ops->get_trip_temp(tz, count, &trip_temp);
> @@ -1149,8 +1166,6 @@ void thermal_zone_device_update(struct
> thermal_zone_device *tz) thermal_zone_device_passive(tz, temp,
> tz->forced_passive, THERMAL_TRIPS_NONE);
>
> - tz->last_temperature = temp;
> -
> leave:
> if (tz->passive)
> thermal_zone_device_set_polling(tz,
> tz->passive_delay); diff --git a/include/linux/thermal.h
> b/include/linux/thermal.h index b355c62..ab656d6 100644
> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -44,6 +44,12 @@ enum thermal_trip_type {
> THERMAL_TRIP_CRITICAL,
> };
>
> +enum thermal_trend {
> + THERMAL_TREND_STABLE, /* temperature is stable */
> + THERMAL_TREND_RAISING, /* temperature is raising */
> + THERMAL_TREND_DROPPING, /* temperature is dropping */
> +};
> +
> struct thermal_zone_device_ops {
> int (*bind) (struct thermal_zone_device *,
> struct thermal_cooling_device *);
> @@ -65,6 +71,8 @@ struct thermal_zone_device_ops {
> int (*set_trip_hyst) (struct thermal_zone_device *, int,
> unsigned long);
> int (*get_crit_temp) (struct thermal_zone_device *, unsigned
> long *);
> + int (*get_trend) (struct thermal_zone_device *, int,
> + enum thermal_trend *);
> int (*notify) (struct thermal_zone_device *, int,
> enum thermal_trip_type);
> };
> @@ -109,6 +117,7 @@ struct thermal_zone_device {
> int tc2;
> int passive_delay;
> int polling_delay;
> + int temperature;
> int last_temperature;
> bool passive;
> unsigned int forced_passive;
--
Thanks,
Jacob
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
