On Fri, 11 May 2012, Sarah Sharp wrote: > > That reminds me... I think this should not be so closely linked with > > ACPI. There's a perfectly good USB Clear-Feature request for turning > > off port power; that's what we should use. If hooks are required for > > interfacing with platform-specific code (such as ACPI), they can be > > added at the appropriate places. > > So would you rather userspace issue a clear port power feature request > to the roothub through libusb than have a sysfs file per port in > /sys/bus/usb/devices/../power/ ? Or are you just saying that the sysfs > interface should issue the request to the hub (which may be the > roothub), and the xHCI driver can just implement the ACPI calls in its > roothub control method? The latter. Except that the ACPI calls may need to occur in more places than just xhci-hcd (ehci-hcd, for example). And what about ports on the USB-2 "rate-matching" hubs that Intel now builds into its chipsets? For that matter, is it really necessary to involve ACPI in port power changes at all? Why can't xhci-hcd simply set the PP bit in the PORTSC register, and rely on the PPC bit in the HCCPARAMS register to indicate whether or not port power control is supported? In other words, what advantage does ACPI have over USB native power control? Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
