Hi all, This is about Acer WMI driver and bluetooth support. I hope I'm at the right place with my question :-) I tried to use bluetooth again on my Acer TravelMate 5730G and discovered a usability problem. I've checked 2.6.38-rc7: 0. On startup, the bluetooth LED is off, acer-bluetooth SW rfkill is blocked. 1. I have to enable the HW bluetooth switch to get the bluetooth LED running (USB device appears in lsusb). The acer-bluetooth SW rfkill is unblocked, the SW rfkill of hci0 is blocked. 2. Next I have to unblock SW rfkill on hci0 by a call to `rfkill unblock <number of hci0>`. 3. Last I have to enable the HCI by the call to `hciconfig hci0 up`. How is this supposed to work? I tried to use "rfkill.default_state=1" on kernel command line, but without any success. When I boot into 2.6.37, the bluetooth LED goes ON automatically and hciconfig shows the hci0 as UP. Thanks. Best regards, Oldřich. -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
