Modify/add some comments to minimize ACPICA/linux GPE code divergence.
Signed-off-by: Lin Ming <ming.m.lin@xxxxxxxxx>
---
drivers/acpi/acpica/achware.h | 2 +-
drivers/acpi/acpica/evgpe.c | 23 ++++++++++++++---------
drivers/acpi/acpica/evgpeblk.c | 18 ++++++++----------
drivers/acpi/acpica/evgpeinit.c | 24 ++++++++++++++++++++----
drivers/acpi/acpica/evxfgpe.c | 32 +++++++++++++++++++++-----------
drivers/acpi/acpica/hwgpe.c | 30 ++++++++++++++++++------------
6 files changed, 82 insertions(+), 47 deletions(-)
diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h
index 167470a..258d628 100644
--- a/drivers/acpi/acpica/achware.h
+++ b/drivers/acpi/acpica/achware.h
@@ -94,7 +94,7 @@ u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
struct acpi_gpe_register_info *gpe_register_info);
acpi_status
-acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action);
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action);
acpi_status
acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index c9d9ecf..6cb679f 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -104,7 +104,7 @@ acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
*
* RETURN: Status
*
- * DESCRIPTION: Clear the given GPE from stale events and enable it.
+ * DESCRIPTION: Clear a GPE of stale events and enable it.
*
******************************************************************************/
acpi_status
@@ -142,7 +142,7 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
*
* FUNCTION: acpi_ev_add_gpe_reference
*
- * PARAMETERS: gpe_event_info - GPE to enable
+ * PARAMETERS: gpe_event_info - Add a reference to this GPE
*
* RETURN: Status
*
@@ -163,6 +163,9 @@ acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info
gpe_event_info->runtime_count++;
if (gpe_event_info->runtime_count == 1) {
+
+ /* Enable on first reference */
+
status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
if (ACPI_SUCCESS(status)) {
status = acpi_ev_enable_gpe(gpe_event_info);
@@ -180,7 +183,7 @@ acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info
*
* FUNCTION: acpi_ev_remove_gpe_reference
*
- * PARAMETERS: gpe_event_info - GPE to disable
+ * PARAMETERS: gpe_event_info - Remove a reference to this GPE
*
* RETURN: Status
*
@@ -201,6 +204,9 @@ acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_i
gpe_event_info->runtime_count--;
if (!gpe_event_info->runtime_count) {
+
+ /* Disable on last reference */
+
status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
if (ACPI_SUCCESS(status)) {
status = acpi_hw_low_set_gpe(gpe_event_info,
@@ -386,7 +392,7 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
}
ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
- "Read GPE Register at GPE%X: Status=%02X, Enable=%02X\n",
+ "Read GPE Register at GPE%02X: Status=%02X, Enable=%02X\n",
gpe_register_info->base_gpe_number,
status_reg, enable_reg));
@@ -567,7 +573,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
******************************************************************************/
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context)
- {
+{
struct acpi_gpe_event_info *gpe_event_info = context;
(void)acpi_ev_finish_gpe(gpe_event_info);
@@ -659,8 +665,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to clear GPE[0x%2X]",
- gpe_number));
+ "Unable to clear GPE%02X", gpe_number));
return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
}
}
@@ -719,7 +724,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Unable to queue handler for GPE[0x%2X] - event disabled",
+ "Unable to queue handler for GPE%2X - event disabled",
gpe_number));
}
break;
@@ -732,7 +737,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
* a GPE to be enabled if it has no handler or method.
*/
ACPI_ERROR((AE_INFO,
- "No handler or method for GPE[0x%2X], disabling event",
+ "No handler or method for GPE%02X, disabling event",
gpe_number));
break;
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index e2e8164..9acb869 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -361,9 +361,9 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
gpe_block->node = gpe_device;
gpe_block->gpe_count = (u16)(register_count * ACPI_GPE_REGISTER_WIDTH);
+ gpe_block->initialized = FALSE;
gpe_block->register_count = register_count;
gpe_block->block_base_number = gpe_block_base_number;
- gpe_block->initialized = FALSE;
ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address,
sizeof(struct acpi_generic_address));
@@ -423,14 +423,12 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device,
*
* FUNCTION: acpi_ev_initialize_gpe_block
*
- * PARAMETERS: gpe_device - Handle to the parent GPE block
- * gpe_block - Gpe Block info
+ * PARAMETERS: acpi_gpe_callback
*
* RETURN: Status
*
- * DESCRIPTION: Initialize and enable a GPE block. First find and run any
- * _PRT methods associated with the block, then enable the
- * appropriate GPEs.
+ * DESCRIPTION: Initialize and enable a GPE block. Enable GPEs that have
+ * associated methods.
* Note: Assumes namespace is locked.
*
******************************************************************************/
@@ -450,8 +448,8 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
ACPI_FUNCTION_TRACE(ev_initialize_gpe_block);
/*
- * Ignore a null GPE block (e.g., if no GPE block 1 exists) and
- * GPE blocks that have been initialized already.
+ * Ignore a null GPE block (e.g., if no GPE block 1 exists), and
+ * any GPE blocks that have been initialized already.
*/
if (!gpe_block || gpe_block->initialized) {
return_ACPI_STATUS(AE_OK);
@@ -459,8 +457,8 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
/*
* Enable all GPEs that have a corresponding method and have the
- * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block must
- * be enabled via the acpi_enable_gpe() interface.
+ * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block
+ * must be enabled via the acpi_enable_gpe() interface.
*/
gpe_enabled_count = 0;
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
index 223dba2..beb3675 100644
--- a/drivers/acpi/acpica/evgpeinit.c
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -45,11 +45,27 @@
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
-#include "acinterp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpeinit")
+/*
+ * Note: History of _PRW support in ACPICA
+ *
+ * Originally (2000 - 2010), the GPE initialization code performed a walk of
+ * the entire namespace to execute the _PRW methods and detect all GPEs
+ * capable of waking the system.
+ *
+ * As of 10/2010, the _PRW method execution has been removed since it is
+ * actually unnecessary. The host OS must in fact execute all _PRW methods
+ * in order to identify the device/power-resource dependencies. We now put
+ * the onus on the host OS to identify the wake GPEs as part of this process
+ * and to inform ACPICA of these GPEs via the acpi_setup_gpe_for_wake interface. This
+ * not only reduces the complexity of the ACPICA initialization code, but in
+ * some cases (on systems with very large namespaces) it should reduce the
+ * kernel boot time as well.
+ */
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_gpe_initialize
@@ -222,7 +238,7 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
acpi_status status = AE_OK;
/*
- * 2) Find any _Lxx/_Exx GPE methods that have just been loaded.
+ * Find any _Lxx/_Exx GPE methods that have just been loaded.
*
* Any GPEs that correspond to new _Lxx/_Exx methods are immediately
* enabled.
@@ -235,9 +251,9 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
return;
}
+ walk_info.count = 0;
walk_info.owner_id = table_owner_id;
walk_info.execute_by_owner_id = TRUE;
- walk_info.count = 0;
/* Walk the interrupt level descriptor list */
@@ -298,7 +314,7 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
* xx - is the GPE number [in HEX]
*
* If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods
- * with that owner.
+ * with that owner.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index fcf4a5c..416845b 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -55,13 +55,19 @@ ACPI_MODULE_NAME("evxfgpe")
*
* PARAMETERS: None
*
- * RETURN: None
+ * RETURN: Status
+ *
+ * DESCRIPTION: Complete GPE initialization and enable all GPEs that have
+ * associated _Lxx or _Exx methods and are not pointed to by any
+ * device _PRW methods (this indicates that these GPEs are
+ * generally intended for system or device wakeup. Such GPEs
+ * have to be enabled directly when the devices whose _PRW
+ * methods point to them are set up for wakeup signaling.)
*
- * DESCRIPTION: Enable all GPEs that have associated _Lxx or _Exx methods and
- * are not pointed to by any device _PRW methods indicating that
- * these GPEs are generally intended for system or device wakeup
- * (such GPEs have to be enabled directly when the devices whose
- * _PRW methods point to them are set up for wakeup signaling).
+ * NOTE: Should be called after any GPEs are added to the system. Primarily,
+ * after the system _PRW methods have been run, but also after a GPE Block
+ * Device has been added or if any new GPE methods have been added via a
+ * dynamic table load.
*
******************************************************************************/
@@ -252,7 +258,8 @@ ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
*
* RETURN: Status
*
- * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit.
+ * DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must
+ * already be marked as a WAKE GPE.
*
******************************************************************************/
@@ -268,8 +275,10 @@ acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 ac
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
- /* Ensure that we have a valid GPE number */
-
+ /*
+ * Ensure that we have a valid GPE number and that this GPE is in
+ * fact a wake GPE
+ */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
@@ -366,7 +375,7 @@ ACPI_EXPORT_SYMBOL(acpi_clear_gpe)
*
* RETURN: Status
*
- * DESCRIPTION: Get status of an event (general purpose)
+ * DESCRIPTION: Get the current status of a GPE (signalled/not_signalled)
*
******************************************************************************/
acpi_status
@@ -476,7 +485,8 @@ ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes)
*
* RETURN: Status
*
- * DESCRIPTION: Create and Install a block of GPE registers
+ * DESCRIPTION: Create and Install a block of GPE registers. The GPEs are not
+ * enabled here.
*
******************************************************************************/
acpi_status
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 7c6d485..85c3cbd 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -62,10 +62,10 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
* PARAMETERS: gpe_event_info - Info block for the GPE
* gpe_register_info - Info block for the GPE register
*
- * RETURN: Status
+ * RETURN: Register mask with a one in the GPE bit position
*
- * DESCRIPTION: Compute GPE enable mask with one bit corresponding to the given
- * GPE set.
+ * DESCRIPTION: Compute the register mask for this GPE. One bit is set in the
+ * correct position for the input GPE.
*
******************************************************************************/
@@ -85,12 +85,12 @@ u32 acpi_hw_get_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info,
*
* RETURN: Status
*
- * DESCRIPTION: Enable or disable a single GPE in its enable register.
+ * DESCRIPTION: Enable or disable a single GPE in the parent enable register.
*
******************************************************************************/
acpi_status
-acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
+acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
{
struct acpi_gpe_register_info *gpe_register_info;
acpi_status status;
@@ -113,14 +113,20 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
return (status);
}
- /* Set ot clear just the bit that corresponds to this GPE */
+ /* Set or clear just the bit that corresponds to this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
gpe_register_info);
switch (action) {
case ACPI_GPE_CONDITIONAL_ENABLE:
- if (!(register_bit & gpe_register_info->enable_for_run))
+
+ /* Only enable if the enable_for_run bit is set */
+
+ if (!(register_bit & gpe_register_info->enable_for_run)) {
return (AE_BAD_PARAMETER);
+ }
+
+ /*lint -fallthrough */
case ACPI_GPE_ENABLE:
ACPI_SET_BIT(enable_mask, register_bit);
@@ -131,7 +137,7 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action)
break;
default:
- ACPI_ERROR((AE_INFO, "Invalid action\n"));
+ ACPI_ERROR((AE_INFO, "Invalid GPE Action, %u\n", action));
return (AE_BAD_PARAMETER);
}
@@ -168,13 +174,13 @@ acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
return (AE_NOT_EXIST);
}
- register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
- gpe_register_info);
-
/*
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
+ register_bit =
+ acpi_hw_get_gpe_register_bit(gpe_event_info, gpe_register_info);
+
status = acpi_hw_write(register_bit,
&gpe_register_info->status_address);
@@ -201,8 +207,8 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
u32 in_byte;
u32 register_bit;
struct acpi_gpe_register_info *gpe_register_info;
- acpi_status status;
acpi_event_status local_event_status = 0;
+ acpi_status status;
ACPI_FUNCTION_ENTRY();
--
1.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
