Re: acpi_atomic_read() requirements

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2010-09-03 at 09:34 +0800, Bjorn Helgaas wrote:
> Hello,
> 
> You recently added acpi_atomic_read() and acpi_atomic_write().
> These are similar to acpi_read() and acpi_write(), but differ
> mainly in two ways:
> 
>   - The atomic ones can be used in interrupt context, because the
>     ioremap() (which may block) can be done earlier by acpi_pre_map_gar()
> 
>   - The atomic ones do 64-bit accesses directly with readq() rather
>     than splitting them into two 32-bit accesses as acpi_read() does.
> 
> It's obvious to me that you need the first property (usable in
> interrupt context).  Do you also rely on the second property
> (doing a single 64-bit access rather than two 32-bit accesses)?

We don't rely on the 64-bit access. But I am not sure whether all
corresponding hardware is OK for splitting accessing. But maybe we can
fix it in the future if necessary. For example adding an
acpi_os_read_memory64.

> I'm curious because there's another path that performs memory
> accesses from interrupt context, using acpi_read() and
> acpi_os_read_memory().  The ACPI IRQ handler reads the PM1
> Status register to learn the interrupt source.  If this is
> memory mapped (not in I/O port space), we currently panic
> because ioremap() can't be called in interrupt context:
> 
>   http://marc.info/?l=linux-acpi&m=128094238920118&w=2
> 
> I wrote a patch that fixes this by premapping these areas so the
> ioremap() happens at boot-time rather than interrupt-time.  This
> works fine, but it ends up looking very much like the atomic
> functions you added.  I'd like to integrate them somehow rather
> than adding more code that does basically the same thing as your
> code.
> 
> If your APEI code that uses acpi_atomic_read()/write() doesn't
> require the single 64-bit access, it might be possible to keep
> the premapping support, i.e., acpi_pre_map_gar(), change
> acpi_os_read_memory() to check the acpi_iomaps list first and
> only do the ioremap() if it doesn't find anything, remove
> acpi_atomic_read(), and just use acpi_read() instead.

That is OK for me.

Best Regards,
Huang Ying


--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux