Bob, Matthew,
The patch below implements the idea we've been recently discussing off-list,
to only enable "runtime" GPEs after the ACPI namespace have been scanned and
we know what GPEs are pointed to by _PRW methods.
It is on top of the current mainline Linux kernel (2.6.36-rc2+) which contains
my patches that removed the _PRW scan from the ACPICA code and modified
the GPE handler installation/removal.
Fortunately, the patch turns out to be rather straightforward, although I have
one reservation. Namely, I'm not sure if any GPEs can be added after
acpi_scan_init() has returned, in which case we may want to enable them
as soon as they are found and some code to do that will be necessary.
Thanks,
Rafael
---
From: Rafael J. Wysocki <rjw@xxxxxxx>
Subject: ACPI / ACPICA: Defer enabling of runtime GPEs
The current ACPI GPEs initialization code has a problem that it
enables some GPEs pointed to by device _PRW methods and are generally
intended for signaling wakeup events (system or device wakeup).
These GPEs are then almost immediately disabled by the ACPI namespace
scanning code with the help of acpi_gpe_can_wake(), but it would be
better no to enable them at all until really necessary.
Modify the initialization of GPEs so that the ones that have
associated _Lxx or _Exx methods and are not pointed to by any _PRW
methods will be enabled after the namespace scan is complete.
Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
drivers/acpi/acpica/acevents.h | 5 ++-
drivers/acpi/acpica/aclocal.h | 2 -
drivers/acpi/acpica/evevent.c | 41 -----------------------------
drivers/acpi/acpica/evgpeblk.c | 34 ++++++++----------------
drivers/acpi/acpica/evgpeinit.c | 28 --------------------
drivers/acpi/acpica/evxface.c | 19 +++++++------
drivers/acpi/acpica/evxfevnt.c | 55 +++++++++++++++++++++++++++-------------
drivers/acpi/acpica/utxface.c | 13 ---------
drivers/acpi/bus.c | 1
include/acpi/acpixf.h | 2 +
10 files changed, 66 insertions(+), 134 deletions(-)
Index: linux-2.6/drivers/acpi/acpica/evxfevnt.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evxfevnt.c
+++ linux-2.6/drivers/acpi/acpica/evxfevnt.c
@@ -379,21 +379,12 @@ acpi_status acpi_gpe_can_wake(acpi_handl
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
- if (!gpe_event_info) {
+ if (gpe_event_info) {
+ gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
+ } else {
status = AE_BAD_PARAMETER;
- goto unlock_and_exit;
- }
-
- if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) {
- goto unlock_and_exit;
}
- gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
- if (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) {
- (void)acpi_raw_disable_gpe(gpe_event_info);
- }
-
-unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
@@ -651,7 +642,7 @@ acpi_install_gpe_block(acpi_handle gpe_d
struct acpi_generic_address *gpe_block_address,
u32 register_count, u32 interrupt_number)
{
- acpi_status status;
+ acpi_status status = AE_OK;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
struct acpi_gpe_block_info *gpe_block;
@@ -715,10 +706,6 @@ acpi_install_gpe_block(acpi_handle gpe_d
obj_desc->device.gpe_block = gpe_block;
- /* Enable the runtime GPEs in the new block */
-
- status = acpi_ev_initialize_gpe_block(node, gpe_block);
-
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
@@ -924,3 +911,37 @@ acpi_status acpi_enable_all_runtime_gpes
return_ACPI_STATUS(status);
}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_complete_gpe_initialization
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Enable all GPEs that have associated _Lxx or _Exx methods and
+ * are not pointed to by any device _PRW methods indicating that
+ * these GPEs are generally intended for system or device wakeup
+ * (such GPEs have to be enabled directly when the devices whose
+ * _PRW methods point to them are set up for wakeup signaling).
+ *
+ ******************************************************************************/
+
+acpi_status acpi_complete_gpe_initialization(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_complete_gpe_initialization);
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL);
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
+
+ return_ACPI_STATUS(status);
+}
Index: linux-2.6/drivers/acpi/acpica/acevents.h
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/acevents.h
+++ linux-2.6/drivers/acpi/acpica/acevents.h
@@ -105,8 +105,9 @@ acpi_ev_create_gpe_block(struct acpi_nam
struct acpi_gpe_block_info **return_gpe_block);
acpi_status
-acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
- struct acpi_gpe_block_info *gpe_block);
+acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
+ struct acpi_gpe_block_info *gpe_block,
+ void *ignored);
acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block);
Index: linux-2.6/drivers/acpi/acpica/evgpeblk.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evgpeblk.c
+++ linux-2.6/drivers/acpi/acpica/evgpeblk.c
@@ -389,7 +389,6 @@ acpi_ev_create_gpe_block(struct acpi_nam
walk_info.gpe_block = gpe_block;
walk_info.gpe_device = gpe_device;
- walk_info.enable_this_gpe = FALSE;
walk_info.execute_by_owner_id = FALSE;
status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device,
@@ -434,14 +433,14 @@ acpi_ev_create_gpe_block(struct acpi_nam
******************************************************************************/
acpi_status
-acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device,
- struct acpi_gpe_block_info *gpe_block)
+acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
+ struct acpi_gpe_block_info *gpe_block,
+ void *ignored)
{
acpi_status status;
struct acpi_gpe_event_info *gpe_event_info;
u32 gpe_enabled_count;
u32 gpe_index;
- u32 gpe_number;
u32 i;
u32 j;
@@ -454,15 +453,12 @@ acpi_ev_initialize_gpe_block(struct acpi
}
/*
- * Enable all GPEs that have a corresponding method. Any other GPEs
- * within this block must be enabled via the acpi_enable_gpe interface.
+ * Enable all GPEs that have a corresponding method and have the
+ * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block must
+ * be enabled via the acpi_enable_gpe() interface.
*/
gpe_enabled_count = 0;
- if (gpe_device == acpi_gbl_fadt_gpe_device) {
- gpe_device = NULL;
- }
-
for (i = 0; i < gpe_block->register_count; i++) {
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
@@ -470,27 +466,19 @@ acpi_ev_initialize_gpe_block(struct acpi
gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
gpe_event_info = &gpe_block->event_info[gpe_index];
- gpe_number = gpe_index + gpe_block->block_base_number;
/* Ignore GPEs that have no corresponding _Lxx/_Exx method */
- if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)) {
+ if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)
+ || (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
continue;
}
- /*
- * If the GPE has already been enabled for runtime
- * signaling, make sure it remains enabled, but do not
- * increment its reference counter.
- */
- status = gpe_event_info->runtime_count ?
- acpi_ev_enable_gpe(gpe_event_info) :
- acpi_enable_gpe(gpe_device, gpe_number);
-
+ status = acpi_raw_enable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Could not enable GPE 0x%02X",
- gpe_number));
+ "Could not enable GPE 0x%02X",
+ gpe_index + gpe_block->block_base_number));
continue;
}
Index: linux-2.6/include/acpi/acpixf.h
===================================================================
--- linux-2.6.orig/include/acpi/acpixf.h
+++ linux-2.6/include/acpi/acpixf.h
@@ -308,6 +308,8 @@ acpi_install_gpe_block(acpi_handle gpe_d
acpi_status acpi_remove_gpe_block(acpi_handle gpe_device);
+acpi_status acpi_complete_gpe_initialization(void);
+
/*
* Resource interfaces
*/
Index: linux-2.6/drivers/acpi/acpica/aclocal.h
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/aclocal.h
+++ linux-2.6/drivers/acpi/acpica/aclocal.h
@@ -413,6 +413,7 @@ struct acpi_handler_info {
void *context; /* Context to be passed to handler */
struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */
u8 orig_flags; /* Original misc info about this GPE */
+ u8 orig_enabled; /* Set if the GPE was originally enabled */
};
union acpi_gpe_dispatch_info {
@@ -473,7 +474,6 @@ struct acpi_gpe_walk_info {
struct acpi_gpe_block_info *gpe_block;
u16 count;
acpi_owner_id owner_id;
- u8 enable_this_gpe;
u8 execute_by_owner_id;
};
Index: linux-2.6/drivers/acpi/acpica/evgpeinit.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evgpeinit.c
+++ linux-2.6/drivers/acpi/acpica/evgpeinit.c
@@ -239,7 +239,6 @@ void acpi_ev_update_gpes(acpi_owner_id t
walk_info.owner_id = table_owner_id;
walk_info.execute_by_owner_id = TRUE;
walk_info.count = 0;
- walk_info.enable_this_gpe = TRUE;
/* Walk the interrupt level descriptor list */
@@ -301,8 +300,6 @@ void acpi_ev_update_gpes(acpi_owner_id t
*
* If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods
* with that owner.
- * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE
- * method is immediately enabled (Used for Load/load_table operators)
*
******************************************************************************/
@@ -315,8 +312,6 @@ acpi_ev_match_gpe_method(acpi_handle obj
struct acpi_gpe_walk_info *walk_info =
ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
struct acpi_gpe_event_info *gpe_event_info;
- struct acpi_namespace_node *gpe_device;
- acpi_status status;
u32 gpe_number;
char name[ACPI_NAME_SIZE + 1];
u8 type;
@@ -421,29 +416,6 @@ acpi_ev_match_gpe_method(acpi_handle obj
gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD);
gpe_event_info->dispatch.method_node = method_node;
- /*
- * Enable this GPE if requested. This only happens when during the
- * execution of a Load or load_table operator. We have found a new
- * GPE method and want to immediately enable the GPE if it is a
- * runtime GPE.
- */
- if (walk_info->enable_this_gpe) {
-
- walk_info->count++;
- gpe_device = walk_info->gpe_device;
-
- if (gpe_device == acpi_gbl_fadt_gpe_device) {
- gpe_device = NULL;
- }
-
- status = acpi_enable_gpe(gpe_device, gpe_number);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not enable GPE 0x%02X",
- gpe_number));
- }
- }
-
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
"Registered GPE method %s as GPE number 0x%.2X\n",
name, gpe_number));
Index: linux-2.6/drivers/acpi/acpica/evevent.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evevent.c
+++ linux-2.6/drivers/acpi/acpica/evevent.c
@@ -95,47 +95,6 @@ acpi_status acpi_ev_initialize_events(vo
/*******************************************************************************
*
- * FUNCTION: acpi_ev_install_fadt_gpes
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Completes initialization of the FADT-defined GPE blocks
- * (0 and 1). The HW must be fully initialized at this point,
- * including global lock support.
- *
- ******************************************************************************/
-
-acpi_status acpi_ev_install_fadt_gpes(void)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_install_fadt_gpes);
-
- /* Namespace must be locked */
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
- /* FADT GPE Block 0 */
-
- (void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
- acpi_gbl_gpe_fadt_blocks[0]);
-
- /* FADT GPE Block 1 */
-
- (void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device,
- acpi_gbl_gpe_fadt_blocks[1]);
-
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ev_install_xrupt_handlers
*
* PARAMETERS: None
Index: linux-2.6/drivers/acpi/acpica/utxface.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/utxface.c
+++ linux-2.6/drivers/acpi/acpica/utxface.c
@@ -290,19 +290,6 @@ acpi_status acpi_initialize_objects(u32
}
/*
- * Complete the GPE initialization for the GPE blocks defined in the FADT
- * (GPE block 0 and 1).
- *
- * NOTE: Currently, there seems to be no need to run the _REG methods
- * before enabling the GPEs.
- */
- if (!(flags & ACPI_NO_EVENT_INIT)) {
- status = acpi_ev_install_fadt_gpes();
- if (ACPI_FAILURE(status))
- return (status);
- }
-
- /*
* Empty the caches (delete the cached objects) on the assumption that
* the table load filled them up more than they will be at runtime --
* thus wasting non-paged memory.
Index: linux-2.6/drivers/acpi/bus.c
===================================================================
--- linux-2.6.orig/drivers/acpi/bus.c
+++ linux-2.6/drivers/acpi/bus.c
@@ -1032,6 +1032,7 @@ static int __init acpi_init(void)
dmi_check_system(power_nocheck_dmi_table);
acpi_scan_init();
+ acpi_complete_gpe_initialization();
acpi_ec_init();
acpi_power_init();
acpi_sysfs_init();
Index: linux-2.6/drivers/acpi/acpica/evxface.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evxface.c
+++ linux-2.6/drivers/acpi/acpica/evxface.c
@@ -793,15 +793,16 @@ acpi_install_gpe_handler(acpi_handle gpe
(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
/*
- * If the GPE is associated with a method and it cannot wake up the
- * system from sleep states, it was enabled automatically during
- * initialization, so it has to be disabled now to avoid spurious
- * execution of the handler.
+ * If the GPE is associated with a method, it might have been enabled
+ * automatically during initialization, in which case it has to be
+ * disabled now to avoid spurious execution of the handler.
*/
if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD)
- && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE))
+ && gpe_event_info->runtime_count) {
+ handler->orig_enabled = 1;
(void)acpi_raw_disable_gpe(gpe_event_info);
+ }
/* Install the handler */
@@ -904,13 +905,13 @@ acpi_remove_gpe_handler(acpi_handle gpe_
gpe_event_info->flags |= handler->orig_flags;
/*
- * If the GPE was previously associated with a method and it cannot wake
- * up the system from sleep states, it should be enabled at this point
- * to restore the post-initialization configuration.
+ * If the GPE was previously associated with a method and it was
+ * enabled, it should be enabled at this point to restore the
+ * post-initialization configuration.
*/
if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD)
- && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE))
+ && handler->orig_enabled)
(void)acpi_raw_enable_gpe(gpe_event_info);
/* Now we can free the handler object */
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
