> > Could you provide the output of: > cat /sys/devices/system/clocksource/clocksource0/available_clocksource hpet acpi_pm > cat /sys/devices/system/clocksource/clocksource0/current_clocksource > hpet > I assume you're using the TSC, and hitting the halt-in-c3 issue, but > I'm curious why the clocksource watchdog isn't catching this and > dropping you back to a more stable clocksource. > I also attached the dmesg output. Thank you for your help. Jean-Philippe François
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:12:52 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable) [ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfedc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfedc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009b400 (usable) [ 0.000000] modified: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d6000 - 00000000000d8000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] modified: 00000000bfed0000 - 00000000bfedc000 (ACPI NVS) [ 0.000000] modified: 00000000bfedc000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 7f810000 - 7ffef157 [ 0.000000] Allocated new RAMDISK: 008e2000 - 010c1157 [ 0.000000] Move RAMDISK from 000000007f810000 - 000000007ffef156 to 008e2000 - 010c1156 [ 0.000000] ACPI: RSDP 000f8000 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT bfed24d6 0007C (v01 FSC PC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP bfed8c6c 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT bfed3ae1 05117 (v02 ECS F44 06040000 INTL 20050624) [ 0.000000] ACPI: FACS bfedbfc0 00040 [ 0.000000] ACPI: HPET bfed8d60 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG bfed8d98 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: TMOR bfed8dd4 00026 (v01 PTLTD 06040000 PTL 00000003) [ 0.000000] ACPI: APIC bfed8dfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT bfed8e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC bfed8e8a 00176 (v01 FSC PC 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT bfed3804 002DD (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT bfed2b0e 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bfed2a68 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT bfed2552 00516 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000] [ 0.000000] #5 [00008de000 - 00008e1140] BRK ==> [00008de000 - 00008e1140] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008e2000 - 00010c1157] NEW RAMDISK ==> [00008e2000 - 00010c1157] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f8030] f8030 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfed0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] On node 0 totalpages: 786023 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c10c3000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3959 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4366 pages used for memmap [ 0.000000] HighMem zone: 554436 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000 [ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u2097152 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779881 [ 0.000000] Kernel command line: root=UUID=d6f01bdd-8503-4992-bc4e-a511f74318fb ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15722560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfed0) [ 0.000000] Memory: 3085996k/3144512k available (4679k kernel code, 57072k reserved, 2124k data, 660k init, 2235208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2493.552 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.10 BogoMIPS (lpj=9974208) [ 0.004020] Security Framework initialized [ 0.004036] AppArmor: AppArmor initialized [ 0.004041] Mount-cache hash table entries: 512 [ 0.004147] Initializing cgroup subsys ns [ 0.004151] Initializing cgroup subsys cpuacct [ 0.004154] Initializing cgroup subsys memory [ 0.004160] Initializing cgroup subsys devices [ 0.004162] Initializing cgroup subsys freezer [ 0.004164] Initializing cgroup subsys net_cls [ 0.004181] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004183] CPU: L2 cache: 6144K [ 0.004186] CPU: Physical Processor ID: 0 [ 0.004187] CPU: Processor Core ID: 0 [ 0.004190] mce: CPU supports 6 MCE banks [ 0.004197] CPU0: Thermal monitoring enabled (TM2) [ 0.004200] using mwait in idle threads. [ 0.004206] Performance Events: Core2 events, Intel PMU driver. [ 0.004213] ... version: 2 [ 0.004214] ... bit width: 40 [ 0.004216] ... generic registers: 2 [ 0.004217] ... value mask: 000000ffffffffff [ 0.004219] ... max period: 000000007fffffff [ 0.004220] ... fixed-purpose events: 3 [ 0.004221] ... event mask: 0000000700000003 [ 0.004225] Checking 'hlt' instruction... OK. [ 0.022257] ACPI: Core revision 20090903 [ 0.031066] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.031073] ftrace: allocating 21780 entries in 43 pages [ 0.032040] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032385] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074641] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 6144K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.160078] CPU1: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.160089] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.164015] Brought up 2 CPUs [ 0.164018] Total of 2 processors activated (9974.55 BogoMIPS). [ 0.164896] CPU0 attaching sched-domain: [ 0.164899] domain 0: span 0-1 level MC [ 0.164901] groups: 0 1 [ 0.164906] CPU1 attaching sched-domain: [ 0.164908] domain 0: span 0-1 level MC [ 0.164910] groups: 1 0 [ 0.164992] devtmpfs: initialized [ 0.164992] regulator: core version 0.5 [ 0.164992] Time: 8:48:21 Date: 08/24/10 [ 0.164992] NET: Registered protocol family 16 [ 0.164992] Trying to unpack rootfs image as initramfs... [ 0.164992] EISA bus registered [ 0.164992] ACPI: bus type pci registered [ 0.164992] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.164992] PCI: MCFG area at e0000000 reserved in E820 [ 0.164992] PCI: Using MMCONFIG for extended config space [ 0.164992] PCI: Using configuration type 1 for base access [ 0.168079] bio: create slab <bio-0> at 0 [ 0.168793] ACPI: EC: Look up EC in DSDT [ 0.170758] ACPI: BIOS _OSI(Linux) query ignored [ 0.248048] ACPI: Interpreter enabled [ 0.248062] ACPI: (supports S0 S3 S4 S5) [ 0.248085] ACPI: Using IOAPIC for interrupt routing [ 0.292125] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.292434] ACPI: No dock devices found. [ 0.292958] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.293065] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.293068] pci 0000:00:01.0: PME# disabled [ 0.293154] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 0.293221] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 0.293292] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0804800-0xf0804bff] [ 0.293356] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.293361] pci 0000:00:1a.7: PME# disabled [ 0.293415] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0800000-0xf0803fff] [ 0.293477] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.293481] pci 0000:00:1b.0: PME# disabled [ 0.293576] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.293581] pci 0000:00:1c.0: PME# disabled [ 0.293678] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.293682] pci 0000:00:1c.1: PME# disabled [ 0.293781] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.293786] pci 0000:00:1c.2: PME# disabled [ 0.293882] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.293887] pci 0000:00:1c.3: PME# disabled [ 0.293984] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.293988] pci 0000:00:1c.4: PME# disabled [ 0.294085] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.294090] pci 0000:00:1c.5: PME# disabled [ 0.294153] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] [ 0.294219] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] [ 0.294285] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] [ 0.294355] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0804c00-0xf0804fff] [ 0.294418] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.294424] pci 0000:00:1d.7: PME# disabled [ 0.294598] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.294602] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.294606] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0068 (mask 0007) [ 0.294610] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0260 (mask 0003) [ 0.294667] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.294674] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.294682] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.294689] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.294697] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] [ 0.294770] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df] [ 0.294777] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf] [ 0.294785] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7] [ 0.294793] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb] [ 0.294800] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 0.294808] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0804000-0xf08047ff] [ 0.294852] pci 0000:00:1f.2: PME# supported from D3hot [ 0.294857] pci 0000:00:1f.2: PME# disabled [ 0.294889] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.294914] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 0.294985] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.294999] pci 0000:01:00.0: reg 18 64bit mmio: [0xcfef0000-0xcfefffff] [ 0.295006] pci 0000:01:00.0: reg 20 io port: [0x2000-0x20ff] [ 0.295019] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.295049] pci 0000:01:00.0: supports D1 D2 [ 0.295100] pci 0000:01:00.1: reg 10 64bit mmio: [0xcfeec000-0xcfeeffff] [ 0.295159] pci 0000:01:00.1: supports D1 D2 [ 0.295229] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 0.295232] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff] [ 0.295237] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.295296] pci 0000:00:1c.0: bridge io port: [0xf000-0xffff] [ 0.295301] pci 0000:00:1c.0: bridge 32bit mmio: [0xfb000000-0xfcffffff] [ 0.295370] pci 0000:04:00.0: reg 10 32bit mmio: [0xf0300000-0xf03003ff] [ 0.295389] pci 0000:04:00.0: reg 18 io port: [0x3000-0x307f] [ 0.295425] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.295543] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.295548] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0300000-0xf03fffff] [ 0.295646] pci 0000:05:00.0: reg 10 64bit mmio: [0xf0200000-0xf0201fff] [ 0.295764] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.295772] pci 0000:05:00.0: PME# disabled [ 0.295858] pci 0000:00:1c.2: bridge 32bit mmio: [0xf0200000-0xf02fffff] [ 0.295940] pci 0000:06:00.0: reg 10 io port: [0x4000-0x40ff] [ 0.295969] pci 0000:06:00.0: reg 18 64bit mmio: [0xf0500000-0xf0500fff] [ 0.296008] pci 0000:06:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.296071] pci 0000:06:00.0: supports D1 D2 [ 0.296073] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.296078] pci 0000:06:00.0: PME# disabled [ 0.296157] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff] [ 0.296162] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0500000-0xf05fffff] [ 0.296252] pci 0000:07:00.0: reg 10 64bit mmio: [0xf0402000-0xf040207f] [ 0.296273] pci 0000:07:00.0: reg 18 64bit mmio: [0xf0400000-0xf0401fff] [ 0.296285] pci 0000:07:00.0: reg 20 io port: [0x5000-0x507f] [ 0.296357] pci 0000:07:00.0: supports D1 D2 [ 0.296432] pci 0000:00:1c.4: bridge io port: [0x5000-0x5fff] [ 0.296437] pci 0000:00:1c.4: bridge 32bit mmio: [0xf0400000-0xf04fffff] [ 0.296564] pci 0000:08:00.0: reg 24 32bit mmio: [0xf0600000-0xf0601fff] [ 0.296616] pci 0000:08:00.0: PME# supported from D3hot [ 0.296622] pci 0000:08:00.0: PME# disabled [ 0.296692] pci 0000:08:00.1: reg 10 io port: [0x6020-0x6027] [ 0.296704] pci 0000:08:00.1: reg 14 io port: [0x6014-0x6017] [ 0.296715] pci 0000:08:00.1: reg 18 io port: [0x6018-0x601f] [ 0.296726] pci 0000:08:00.1: reg 1c io port: [0x6010-0x6013] [ 0.296737] pci 0000:08:00.1: reg 20 io port: [0x6000-0x600f] [ 0.296866] pci 0000:00:1c.5: bridge io port: [0x6000-0x6fff] [ 0.296871] pci 0000:00:1c.5: bridge 32bit mmio: [0xf0600000-0xf06fffff] [ 0.296927] pci 0000:09:04.0: reg 10 32bit mmio: [0xf0701000-0xf0701fff] [ 0.296935] pci 0000:09:04.0: reg 14 32bit mmio: [0xf0700000-0xf07007ff] [ 0.296987] pci 0000:09:04.0: supports D1 D2 [ 0.296989] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.296993] pci 0000:09:04.0: PME# disabled [ 0.297063] pci 0000:00:1e.0: transparent bridge [ 0.297070] pci 0000:00:1e.0: bridge 32bit mmio: [0xf0700000-0xf07fffff] [ 0.297122] pci_bus 0000:00: on NUMA node 0 [ 0.297126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.297300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.297366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.297427] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.297488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.297549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.297611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.297672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 0.297753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.306795] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.306878] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.306960] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15) [ 0.307041] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.307122] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.307203] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.307286] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.307366] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.307466] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.307472] vgaarb: loaded [ 0.307578] SCSI subsystem initialized [ 0.307655] libata version 3.00 loaded. [ 0.307716] usbcore: registered new interface driver usbfs [ 0.307726] usbcore: registered new interface driver hub [ 0.307748] usbcore: registered new device driver usb [ 0.307867] ACPI: WMI: Mapper loaded [ 0.307869] PCI: Using ACPI for IRQ routing [ 0.308086] NetLabel: Initializing [ 0.308088] NetLabel: domain hash size = 128 [ 0.308089] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.308100] NetLabel: unlabeled traffic allowed by default [ 0.308128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.308132] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.312051] Switching to clocksource tsc [ 0.313741] AppArmor: AppArmor Filesystem Enabled [ 0.313748] pnp: PnP ACPI init [ 0.313756] ACPI: bus type pnp registered [ 0.330388] Freeing initrd memory: 8060k freed [ 0.333440] pnp 00:07: io resource (0xfe00-0xfe00) overlaps 0000:00:1c.0 BAR 13 (0xf000-0xffff), disabling [ 0.333780] pnp: PnP ACPI: found 11 devices [ 0.333782] ACPI: ACPI bus type pnp unregistered [ 0.333789] PnPBIOS: Disabled by ACPI PNP [ 0.333807] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.333809] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.333811] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.333814] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.333816] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 0.333819] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.333821] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.333823] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.333829] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.333837] system 00:07: ioport range 0x680-0x69f has been reserved [ 0.333840] system 00:07: ioport range 0x800-0x80f has been reserved [ 0.333842] system 00:07: ioport range 0x1000-0x107f has been reserved [ 0.333844] system 00:07: ioport range 0x1180-0x11bf has been reserved [ 0.333846] system 00:07: ioport range 0x1640-0x164f has been reserved [ 0.368692] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.368694] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 0.368698] pci 0000:00:01.0: MEM window: 0xcfe00000-0xcfefffff [ 0.368702] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.368706] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.368709] pci 0000:00:1c.0: IO window: 0xf000-0xffff [ 0.368715] pci 0000:00:1c.0: MEM window: 0xfb000000-0xfcffffff [ 0.368720] pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c01fffff [ 0.368728] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 [ 0.368731] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.368737] pci 0000:00:1c.1: MEM window: 0xf0300000-0xf03fffff [ 0.368742] pci 0000:00:1c.1: PREFETCH window: 0xc0200000-0xc03fffff [ 0.368749] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05 [ 0.368753] pci 0000:00:1c.2: IO window: 0x7000-0x7fff [ 0.368759] pci 0000:00:1c.2: MEM window: 0xf0200000-0xf02fffff [ 0.368763] pci 0000:00:1c.2: PREFETCH window: 0x000000c0400000-0x000000c05fffff [ 0.368771] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 0.368774] pci 0000:00:1c.3: IO window: 0x4000-0x4fff [ 0.368780] pci 0000:00:1c.3: MEM window: 0xf0500000-0xf05fffff [ 0.368785] pci 0000:00:1c.3: PREFETCH window: 0xc0600000-0xc07fffff [ 0.368793] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 [ 0.368796] pci 0000:00:1c.4: IO window: 0x5000-0x5fff [ 0.368802] pci 0000:00:1c.4: MEM window: 0xf0400000-0xf04fffff [ 0.368807] pci 0000:00:1c.4: PREFETCH window: 0x000000c0800000-0x000000c09fffff [ 0.368814] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 0.368817] pci 0000:00:1c.5: IO window: 0x6000-0x6fff [ 0.368823] pci 0000:00:1c.5: MEM window: 0xf0600000-0xf06fffff [ 0.368828] pci 0000:00:1c.5: PREFETCH window: 0x000000c0a00000-0x000000c0bfffff [ 0.368836] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 [ 0.368837] pci 0000:00:1e.0: IO window: disabled [ 0.368843] pci 0000:00:1e.0: MEM window: 0xf0700000-0xf07fffff [ 0.368848] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.368862] alloc irq_desc for 16 on node -1 [ 0.368864] alloc kstat_irqs on node -1 [ 0.368869] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.368873] pci 0000:00:01.0: setting latency timer to 64 [ 0.368882] alloc irq_desc for 17 on node -1 [ 0.368883] alloc kstat_irqs on node -1 [ 0.368886] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.368891] pci 0000:00:1c.0: setting latency timer to 64 [ 0.368901] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.368905] pci 0000:00:1c.1: setting latency timer to 64 [ 0.368915] alloc irq_desc for 18 on node -1 [ 0.368916] alloc kstat_irqs on node -1 [ 0.368919] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.368924] pci 0000:00:1c.2: setting latency timer to 64 [ 0.368933] alloc irq_desc for 19 on node -1 [ 0.368934] alloc kstat_irqs on node -1 [ 0.368937] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.368942] pci 0000:00:1c.3: setting latency timer to 64 [ 0.368952] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.368957] pci 0000:00:1c.4: setting latency timer to 64 [ 0.368966] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.368971] pci 0000:00:1c.5: setting latency timer to 64 [ 0.368979] pci 0000:00:1e.0: setting latency timer to 64 [ 0.368983] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.368985] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.368987] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 0.368989] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff] [ 0.368991] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.368994] pci_bus 0000:02: resource 0 io: [0xf000-0xffff] [ 0.368996] pci_bus 0000:02: resource 1 mem: [0xfb000000-0xfcffffff] [ 0.368998] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc01fffff] [ 0.369000] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] [ 0.369002] pci_bus 0000:04: resource 1 mem: [0xf0300000-0xf03fffff] [ 0.369004] pci_bus 0000:04: resource 2 pref mem [0xc0200000-0xc03fffff] [ 0.369006] pci_bus 0000:05: resource 0 io: [0x7000-0x7fff] [ 0.369008] pci_bus 0000:05: resource 1 mem: [0xf0200000-0xf02fffff] [ 0.369010] pci_bus 0000:05: resource 2 pref mem [0xc0400000-0xc05fffff] [ 0.369012] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] [ 0.369014] pci_bus 0000:06: resource 1 mem: [0xf0500000-0xf05fffff] [ 0.369016] pci_bus 0000:06: resource 2 pref mem [0xc0600000-0xc07fffff] [ 0.369018] pci_bus 0000:07: resource 0 io: [0x5000-0x5fff] [ 0.369020] pci_bus 0000:07: resource 1 mem: [0xf0400000-0xf04fffff] [ 0.369022] pci_bus 0000:07: resource 2 pref mem [0xc0800000-0xc09fffff] [ 0.369024] pci_bus 0000:08: resource 0 io: [0x6000-0x6fff] [ 0.369026] pci_bus 0000:08: resource 1 mem: [0xf0600000-0xf06fffff] [ 0.369028] pci_bus 0000:08: resource 2 pref mem [0xc0a00000-0xc0bfffff] [ 0.369031] pci_bus 0000:09: resource 1 mem: [0xf0700000-0xf07fffff] [ 0.369033] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 0.369035] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff] [ 0.369070] NET: Registered protocol family 2 [ 0.369158] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.369450] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.369984] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.370249] TCP: Hash tables configured (established 131072 bind 65536) [ 0.370251] TCP reno registered [ 0.370306] NET: Registered protocol family 1 [ 0.370442] pci 0000:01:00.0: Boot video device [ 0.370467] Simple Boot Flag at 0x36 set to 0x1 [ 0.370599] cpufreq-nforce2: No nForce2 chipset. [ 0.370620] Scanning for low memory corruption every 60 seconds [ 0.370714] audit: initializing netlink socket (disabled) [ 0.370722] type=2000 audit(1282639701.367:1): initialized [ 0.378805] highmem bounce pool size: 64 pages [ 0.378809] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.380048] VFS: Disk quotas dquot_6.5.2 [ 0.380095] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.380564] fuse init (API version 7.13) [ 0.380634] msgmni has been set to 1679 [ 0.380812] alg: No test for stdrng (krng) [ 0.380852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.380855] io scheduler noop registered [ 0.380857] io scheduler anticipatory registered [ 0.380858] io scheduler deadline registered [ 0.380890] io scheduler cfq registered (default) [ 0.381020] alloc irq_desc for 24 on node -1 [ 0.381021] alloc kstat_irqs on node -1 [ 0.381028] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.381033] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.381150] alloc irq_desc for 25 on node -1 [ 0.381152] alloc kstat_irqs on node -1 [ 0.381160] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.381170] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.381312] alloc irq_desc for 26 on node -1 [ 0.381314] alloc kstat_irqs on node -1 [ 0.381322] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.381332] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.381478] alloc irq_desc for 27 on node -1 [ 0.381480] alloc kstat_irqs on node -1 [ 0.381488] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X [ 0.381498] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.381641] alloc irq_desc for 28 on node -1 [ 0.381643] alloc kstat_irqs on node -1 [ 0.381651] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X [ 0.381661] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.381807] alloc irq_desc for 29 on node -1 [ 0.381809] alloc kstat_irqs on node -1 [ 0.381817] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X [ 0.381827] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.381970] alloc irq_desc for 30 on node -1 [ 0.381971] alloc kstat_irqs on node -1 [ 0.381979] pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X [ 0.381989] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.382087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.382235] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.382540] ACPI: AC Adapter [AC0] (on-line) [ 0.382616] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.382647] ACPI: Lid Switch [LID0] [ 0.382681] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.382684] ACPI: Power Button [PWRB] [ 0.382720] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.382722] ACPI: Sleep Button [SLPB] [ 0.382770] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.382772] ACPI: Power Button [PWRF] [ 0.383377] ACPI: SSDT bfed33fe 0033E (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.383803] ACPI: SSDT bfed2d6d 0060C (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.385557] Monitor-Mwait will be used to enter C-1 state [ 0.385579] Monitor-Mwait will be used to enter C-3 state [ 0.385586] Marking TSC unstable due to TSC halts in idle [ 0.385624] Switching to clocksource hpet [ 0.385677] processor LNXCPU:00: registered as cooling_device0 [ 0.385978] ACPI: SSDT bfed373c 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.386234] ACPI: SSDT bfed3379 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.386971] processor LNXCPU:01: registered as cooling_device1 [ 0.410261] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.410267] ACPI: Thermal Zone [THRM] (39 C) [ 0.410374] isapnp: Scanning for PnP cards... [ 0.411525] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.412670] brd: module loaded [ 0.413050] loop: module loaded [ 0.413112] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.413175] ata_piix 0000:00:1f.1: version 2.13 [ 0.413184] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.413225] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.413293] scsi0 : ata_piix [ 0.413349] scsi1 : ata_piix [ 0.413826] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 0.413828] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 0.413884] pata_acpi 0000:08:00.1: enabling device (0000 -> 0001) [ 0.413890] pata_acpi 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.413924] pata_acpi 0000:08:00.1: setting latency timer to 64 [ 0.413937] pata_acpi 0000:08:00.1: PCI INT B disabled [ 0.414177] Fixed MDIO Bus: probed [ 0.414204] PPP generic driver version 2.4.2 [ 0.414233] tun: Universal TUN/TAP device driver, 1.6 [ 0.414234] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.414299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.414315] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.414324] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.414327] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.414352] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.414378] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.418270] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.418281] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf0804800 [ 0.432015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.432085] usb usb1: configuration #1 chosen from 1 choice [ 0.432108] hub 1-0:1.0: USB hub found [ 0.432114] hub 1-0:1.0: 4 ports detected [ 0.432163] alloc irq_desc for 23 on node -1 [ 0.432164] alloc kstat_irqs on node -1 [ 0.432168] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.432177] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.432180] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.432204] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.432233] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.436126] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.436137] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00 [ 0.446595] ACPI: Battery Slot [BAT0] (battery present) [ 0.452014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.452080] usb usb2: configuration #1 chosen from 1 choice [ 0.452102] hub 2-0:1.0: USB hub found [ 0.452109] hub 2-0:1.0: 6 ports detected [ 0.452159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.452171] uhci_hcd: USB Universal Host Controller Interface driver [ 0.452186] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.452192] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.452195] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.452219] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.452251] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 0.452325] usb usb3: configuration #1 chosen from 1 choice [ 0.452348] hub 3-0:1.0: USB hub found [ 0.452354] hub 3-0:1.0: 2 ports detected [ 0.452393] alloc irq_desc for 21 on node -1 [ 0.452395] alloc kstat_irqs on node -1 [ 0.452398] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.452404] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.452407] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.452431] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.452465] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 0.452543] usb usb4: configuration #1 chosen from 1 choice [ 0.452563] hub 4-0:1.0: USB hub found [ 0.452569] hub 4-0:1.0: 2 ports detected [ 0.452610] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.452615] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.452619] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.452643] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.452669] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 0.452747] usb usb5: configuration #1 chosen from 1 choice [ 0.452767] hub 5-0:1.0: USB hub found [ 0.452773] hub 5-0:1.0: 2 ports detected [ 0.452810] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.452815] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.452818] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.452844] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.452876] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 0.452948] usb usb6: configuration #1 chosen from 1 choice [ 0.452968] hub 6-0:1.0: USB hub found [ 0.452973] hub 6-0:1.0: 2 ports detected [ 0.453014] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.453020] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.453023] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.453054] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.453080] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 0.453151] usb usb7: configuration #1 chosen from 1 choice [ 0.453171] hub 7-0:1.0: USB hub found [ 0.453177] hub 7-0:1.0: 2 ports detected [ 0.453255] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.455458] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.457635] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.457640] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.457661] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.457678] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.457695] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.457782] mice: PS/2 mouse device common for all mice [ 0.457939] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.457968] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.458042] device-mapper: uevent: version 1.0.3 [ 0.458110] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.458159] device-mapper: multipath: version 1.1.0 loaded [ 0.458161] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.458247] EISA: Probing bus 0 at eisa.0 [ 0.458252] Cannot allocate resource for EISA slot 1 [ 0.458254] Cannot allocate resource for EISA slot 2 [ 0.458255] Cannot allocate resource for EISA slot 3 [ 0.458257] Cannot allocate resource for EISA slot 4 [ 0.458258] Cannot allocate resource for EISA slot 5 [ 0.458260] Cannot allocate resource for EISA slot 6 [ 0.458261] Cannot allocate resource for EISA slot 7 [ 0.458266] EISA: Detected 0 cards. [ 0.458376] cpuidle: using governor ladder [ 0.458466] cpuidle: using governor menu [ 0.458810] TCP cubic registered [ 0.458933] NET: Registered protocol family 10 [ 0.459310] lo: Disabled Privacy Extensions [ 0.459582] NET: Registered protocol family 17 [ 0.460036] Using IPI No-Shortcut mode [ 0.460089] PM: Resume from disk failed. [ 0.460097] registered taskstats version 1 [ 0.460783] Magic number: 6:450:827 [ 0.460841] rtc_cmos 00:08: setting system clock to 2010-08-24 08:48:21 UTC (1282639701) [ 0.460844] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.460845] EDD information not available. [ 0.494820] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.587664] ata1.00: ATAPI: Optiarc BD ROM BC-5500A, 1.41, max UDMA/33 [ 0.600302] ata1.00: configured for UDMA/33 [ 0.764493] isapnp: No Plug & Play device found [ 0.765066] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 0.765618] scsi 0:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.41 PQ: 0 ANSI: 5 [ 0.768793] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.768795] Uniform CD-ROM driver Revision: 3.20 [ 0.768852] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.768890] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.768954] Freeing unused kernel memory: 660k freed [ 0.769346] Write protecting the kernel text: 4680k [ 0.769395] Write protecting the kernel read-only data: 1844k [ 0.782592] udev: starting version 151 [ 0.824286] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.824309] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.824360] r8169 0000:06:00.0: setting latency timer to 64 [ 0.824436] alloc irq_desc for 31 on node -1 [ 0.824437] alloc kstat_irqs on node -1 [ 0.824454] r8169 0000:06:00.0: irq 31 for MSI/MSI-X [ 0.824993] eth0: RTL8168b/8111b at 0xf805e000, 00:03:0d:8c:20:33, XID 18000000 IRQ 31 [ 0.855181] pata_jmicron 0000:08:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.855220] pata_jmicron 0000:08:00.1: setting latency timer to 64 [ 0.855458] sata_sil24 0000:07:00.0: version 1.1 [ 0.855475] sata_sil24 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.855535] sata_sil24 0000:07:00.0: setting latency timer to 64 [ 0.863633] ahci 0000:00:1f.2: version 3.0 [ 0.863644] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.863677] alloc irq_desc for 32 on node -1 [ 0.863678] alloc kstat_irqs on node -1 [ 0.863689] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X [ 0.863751] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 0.863754] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc [ 0.863759] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.872740] scsi2 : pata_jmicron [ 0.872853] scsi3 : sata_sil24 [ 0.872892] ata5: SATA max UDMA/100 host m128@0xf0402000 port 0xf0400000 irq 16 [ 0.877140] scsi4 : ahci [ 0.890690] scsi5 : pata_jmicron [ 0.890737] ata3: PATA max UDMA/100 cmd 0x6020 ctl 0x6014 bmdma 0x6000 irq 18 [ 0.890739] ata4: PATA max UDMA/100 cmd 0x6018 ctl 0x6010 bmdma 0x6008 irq 18 [ 0.891884] scsi6 : ahci [ 0.900129] usb 2-1: configuration #1 chosen from 1 choice [ 0.905151] scsi7 : ahci [ 0.905273] ata6: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 32 [ 0.905277] ata7: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 32 [ 0.905280] ata8: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804200 irq 32 [ 0.905318] ahci 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.920079] ahci 0000:08:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.920082] ahci 0000:08:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.920089] ahci 0000:08:00.0: setting latency timer to 64 [ 0.920287] scsi8 : ahci [ 0.920386] scsi9 : ahci [ 0.920427] ata9: SATA max UDMA/133 abar m8192@0xf0600000 port 0xf0600100 irq 17 [ 0.920431] ata10: SATA max UDMA/133 abar m8192@0xf0600000 port 0xf0600180 irq 17 [ 1.224085] ata7: SATA link down (SStatus 0 SControl 300) [ 1.224103] ata6: SATA link down (SStatus 0 SControl 300) [ 1.224120] ata8: SATA link down (SStatus 0 SControl 300) [ 1.404085] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.404111] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.443319] ata9.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 1.443321] ata9.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.444433] ata9.00: configured for UDMA/133 [ 1.449793] ata10.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 [ 1.449796] ata10.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.450932] ata10.00: configured for UDMA/133 [ 2.952085] ata5: SATA link down (SStatus 0 SControl 0) [ 3.120195] scsi 8:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 [ 3.120301] sd 8:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.120340] sd 8:0:0:0: [sda] Write Protect is off [ 3.120342] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.120363] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.120482] sda: [ 3.120553] sd 8:0:0:0: Attached scsi generic sg1 type 0 [ 3.120644] scsi 9:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 [ 3.120730] sd 9:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.120767] sd 9:0:0:0: [sdb] Write Protect is off [ 3.120769] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.120789] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.120888] sdb: [ 3.120943] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 3.162201] sdb1 sdb2 sdb3 sdb4 [ 3.166820] sda1 sda2 sda4 [ 3.167055] sd 8:0:0:0: [sda] Attached SCSI disk [ 3.182203] sd 9:0:0:0: [sdb] Attached SCSI disk [ 3.184471] ohci1394 0000:09:04.0: enabling device (0195 -> 0197) [ 3.184477] alloc irq_desc for 20 on node -1 [ 3.184478] alloc kstat_irqs on node -1 [ 3.184483] ohci1394 0000:09:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 3.241089] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f0701000-f07017ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 3.712758] kjournald starting. Commit interval 5 seconds [ 3.712766] EXT3-fs: mounted filesystem with ordered data mode. [ 4.512154] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d0055014b3c] [ 19.377346] udev: starting version 151 [ 19.515266] Adding 3903784k swap on /dev/sdb3. Priority:-1 extents:1 across:3903784k [ 19.555849] Linux agpgart interface v0.103 [ 19.616708] cfg80211: Calling CRDA to update world regulatory domain [ 19.622138] lp: driver loaded but no devices found [ 19.653706] type=1505 audit(1282632520.692:2): operation="profile_load" pid=627 name="/sbin/dhclient3" [ 19.654251] type=1505 audit(1282632520.692:3): operation="profile_load" pid=627 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.654474] cfg80211: World regulatory domain updated: [ 19.654476] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.654478] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.654480] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.654482] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.654484] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.654486] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.654543] type=1505 audit(1282632520.692:4): operation="profile_load" pid=627 name="/usr/lib/connman/scripts/dhclient-script" [ 19.658635] type=1505 audit(1282632520.695:5): operation="profile_load" pid=710 name="/usr/sbin/ntpd" [ 19.661739] [drm] Initialized drm 1.1.0 20060810 [ 19.679586] lirc_dev: IR Remote Control driver registered, major 61 [ 19.698624] lirc_dev: lirc_register_driver: sample_rate: 0 [ 19.700282] lirc_ite8709: device found : irq=10 io=0x260 [ 19.704428] acpi device:03: registered as cooling_device2 [ 19.704460] ACPI: Cant attach device [ 19.704527] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.704558] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 19.750754] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 19.750758] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 19.750842] iwlagn 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 19.750851] iwlagn 0000:05:00.0: setting latency timer to 64 [ 19.750882] iwlagn 0000:05:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 19.778375] Linux video capture interface: v2.00 [ 19.780345] [drm] radeon defaulting to kernel modesetting. [ 19.780347] [drm] radeon kernel modesetting enabled. [ 19.780393] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.780408] radeon 0000:01:00.0: setting latency timer to 64 [ 19.782098] [drm] radeon: Initializing kernel modesetting. [ 19.782667] [drm] register mmio base: 0xCFEF0000 [ 19.782669] [drm] register mmio size: 65536 [ 19.782745] ATOM BIOS: ECS_P75IM0_M76XT [ 19.782763] [drm] Clocks initialized ! [ 19.784442] [drm] Detected VRAM RAM=256M, BAR=256M [ 19.784445] [drm] RAM width 128bits DDR [ 19.785245] [TTM] Zone kernel: Available graphics memory: 430266 kiB. [ 19.785248] [TTM] Zone highmem: Available graphics memory: 1547870 kiB. [ 19.785261] [drm] radeon: 256M of VRAM memory ready [ 19.785263] [drm] radeon: 512M of GTT memory ready. [ 19.785369] alloc irq_desc for 33 on node -1 [ 19.785371] alloc kstat_irqs on node -1 [ 19.785393] radeon 0000:01:00.0: irq 33 for MSI/MSI-X [ 19.785411] [drm] radeon: using MSI. [ 19.785475] [drm] radeon: irq initialized. [ 19.785477] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 19.785709] [drm] Loading RV630 Microcode [ 19.785713] platform radeon_cp.0: firmware: requesting radeon/RV630_pfp.bin [ 19.788591] platform radeon_cp.0: firmware: requesting radeon/RV630_me.bin [ 19.793117] platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin [ 19.838861] iwlagn 0000:05:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 19.839151] alloc irq_desc for 34 on node -1 [ 19.839153] alloc kstat_irqs on node -1 [ 19.839172] iwlagn 0000:05:00.0: irq 34 for MSI/MSI-X [ 19.852045] [drm] ring test succeeded in 1 usecs [ 19.852189] [drm] radeon: ib pool ready. [ 19.852258] [drm] ib test succeeded in 0 usecs [ 19.852260] [drm] Enabling audio support [ 19.852331] [drm] Default TV standard: NTSC [ 19.852422] [drm] Radeon Display Connectors [ 19.852423] [drm] Connector 0: [ 19.852424] [drm] LVDS [ 19.852426] [drm] DDC: 0xac0 0xac0 0xac4 0xac4 0xac8 0xac8 0xacc 0xacc [ 19.852428] [drm] Encoders: [ 19.852429] [drm] LCD1: INTERNAL_LVTM1 [ 19.852430] [drm] Connector 1: [ 19.852431] [drm] DIN [ 19.852432] [drm] Encoders: [ 19.852434] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 19.852435] [drm] Connector 2: [ 19.852436] [drm] HDMI-A [ 19.852437] [drm] HPD1 [ 19.852439] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 19.852440] [drm] Encoders: [ 19.852442] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 19.852443] [drm] Connector 3: [ 19.852444] [drm] VGA [ 19.852446] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 19.852447] [drm] Encoders: [ 19.852448] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 19.865441] alloc irq_desc for 22 on node -1 [ 19.865443] alloc kstat_irqs on node -1 [ 19.865449] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.865479] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.871772] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.981695] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 20.311798] EXT3 FS on sdb1, internal journal [ 20.409616] [drm] fb mappable at 0xD0141000 [ 20.409618] [drm] vram apper at 0xD0000000 [ 20.409619] [drm] size 9216000 [ 20.409620] [drm] fb depth is 24 [ 20.409621] [drm] pitch is 7680 [ 20.409735] fb0: radeondrmfb frame buffer device [ 20.409736] registered panic notifier [ 20.409740] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 20.409781] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.409798] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 20.411517] vga16fb: initializing [ 20.411520] vga16fb: mapped to 0xc00a0000 [ 20.411522] vga16fb: not registering due to another framebuffer present [ 20.427113] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a [ 20.470037] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 20.830778] Console: switching to colour frame buffer device 240x75 [ 20.935953] Cynove 2 Mpix micron camera at usb-0000:00:1d.7-1 registered to minor 0 (high speed) [ 20.935973] usbcore: registered new interface driver ovfx2 [ 20.935975] version 158M : ovfx2 USB Camera Driver [ 21.347688] kjournald starting. Commit interval 5 seconds [ 21.348039] EXT3 FS on sdb2, internal journal [ 21.348043] EXT3-fs: mounted filesystem with ordered data mode. [ 22.895210] r8169: eth0: link up [ 22.895213] r8169: eth0: link up [ 23.236798] type=1505 audit(1282632524.272:6): operation="profile_load" pid=1073 name="/usr/share/gdm/guest-session/Xsession" [ 23.238159] type=1505 audit(1282632524.276:7): operation="profile_replace" pid=1074 name="/sbin/dhclient3" [ 23.238702] type=1505 audit(1282632524.276:8): operation="profile_replace" pid=1074 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 23.238998] type=1505 audit(1282632524.276:9): operation="profile_replace" pid=1074 name="/usr/lib/connman/scripts/dhclient-script" [ 23.241624] type=1505 audit(1282632524.280:10): operation="profile_load" pid=1075 name="/usr/bin/evince" [ 23.248852] type=1505 audit(1282632524.284:11): operation="profile_load" pid=1075 name="/usr/bin/evince-previewer" [ 23.391165] apm: BIOS not found. [ 23.630460] ppdev: user-space parallel port driver [ 25.695146] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 33.232092] eth0: no IPv6 routers present
