Fan runs full speed after S3 sometimes (regression)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

till I was running on 2.6.34-rc5-mm1 (mmotm) and earlier everything was
fine. Now, I'm running 2.6.35-rc6-mm1 (.35-rc5-mm1 was the same) and
sometimes when the computer (desktop) returns from S3, the CPU fan is
running at full speed making a big noise.

I don't know how to debug that. Bisection is out of question -- it
happens once in 10 or 20 cases. There are no fan entries in /sys.

The load is as follows:
$ while :; do cat /proc/loadavg; sleep 3; done
0.37 0.33 0.32 1/325 21358
0.42 0.34 0.32 1/325 21362
0.42 0.34 0.32 1/326 21366
0.38 0.33 0.32 1/330 21386
0.38 0.33 0.32 1/331 21391
0.35 0.33 0.32 1/331 21394
0.32 0.32 0.32 1/331 21397
0.32 0.32 0.32 1/331 21400
0.30 0.32 0.32 1/331 21403
...

I can boot into 34-rc5 to compare that if this is of relevance.

290 kB kernel log since boot over several S3 sleep till now where the
fan is noisy:
http://www.fi.muni.cz/~xslaby/sklad/panics/boot.msg-fan_fullspeed

Should you need DSDT, it's there too:
http://www.fi.muni.cz/~xslaby/sklad/panics/DSDT

Any ideas what could have caused this?

thanks,
-- 
js
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux