Re: [PATCH] acpi: x2apic entry with uid < 255 could use processor statement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2010-08-02 at 13:18 -0700, Yinghai Lu wrote:
> On Mon, Aug 2, 2010 at 12:06 PM, Suresh Siddha
> <suresh.b.siddha@xxxxxxxxx> wrote:
> > On Sat, 2010-07-31 at 07:51 +0100, Yinghai Lu wrote:
> >> According to Intel x2apic spec page 46
> >>
> >> " The hand-off to
> >> OSPM will have processor IDs in the range of 0 to 254 for xAPIC/x2APIC and 0 to 255
> >> for SAPIC declared as either Processor() or Device() objects, but not both. Processor
> >> IDs outside these ranges must be declared as Device() objects."
> >>
> >> So only check if Device is used when acpi_id >=255.
> >>
> >> that will help system with less 255 cpus, but some cpus apic id > 255,
> >> still can use Processor statement instead of Device() objects.
> >
> > But the entries with apic_id < 255 are supposed to use local APIC
> > structure and not local x2apic structure. So entries with apic id < 255
> > must be processed using map_lapic_id() which doesn't have any
> > device_declaration checks.
> >
> > Only for apic ids > 255, we use map_x2apic_id() which needs device
> > declaration. So this patch is not needed. or Am I missing something?
> 
> it is acpi_id aka  Processor id.
> 
> the system has less than 255 cpus, but some cpus apic_id > 255.
> BIOS have apic entries for apic_id < 255, and some x2apic entries for
> apic_id > 255.
> 
> but BIOS still use Processor statement for all cpus.

Ok. I think there might be some confusion or mis-interpretation of the
words here. You referred to x2apic spec page 46, perhaps this is an
older version. Newer x2apic version leaves all the ACPI definitions to
the ACPI 4.0 spec.

And here is what ACPI 4.0 spec says:

In Table5-33 for processor local x2apic structure:

ACPI Processor UID
4
12
OSPM associates the X2APIC Structure with a processor object declared in
the namespace using the Device statement, when the _UID child object of
the processor device evaluates to a numeric value, by matching the
numeric value with this field

And in page 312:

<snip>
The platform may declare processors with IDs in the range of 0-254 for
APIC/x2APIC implementations and 0-255 for SAPIC implementations using
either the ASL Processor statement or the ASL Device statement but not
both. Processors with IDs outside these ranges must be declared using
the ASL Device statement.
</snip>

And in the above paragraph "processors with IDs" are APIC id's and not
ACPI Id's.

So I think your bios need to implement ACPI device objects for the
x2apic entries.

thanks,
suresh

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux