On Mon, 2010-06-21 at 11:33 -0500, James Bottomley wrote: > On Mon, 2010-06-21 at 18:18 +0200, Andi Kleen wrote: > > James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx> writes: > > > > > The system in question has a set of root bridges, with the CD rom (which > > > is seen) being on bus 0 and the SCSI controller, which doesn't show up > > > being on bus 1 (with several other things on busses > 1). > > > > > > The system uses ACPI to detect the multiple bridges, so it seems that > > > this failure in 2.6.35-rc3: > > > > > > ACPI: Core revision 20100428 > > > ACPI Error: Hardware did not enter ACPI mode (20100428/evxfevnt-103) > > > ACPI Warning: AcpiEnable failed (20100428/utxface-147) > > > ACPI: Unable to enable ACPI > > > > That probably causes all the other problems. Without ACPI enabled > > modern systems generally do not work. > > > > Just guessing, but maybe try to revert > > > > b430acbd7c4b919886fa7fd92eeb7a695f1940d3 > > > > That was the last change in this area. > > I can confirm that reverting this over a vanilla 2.6.35-rc3 fixes my > boot problem. Andi asked for the timings with the commit reverted, so here they are (from ACPI version print to PCI root busses found): [ 0.084086] ACPI: Core revision 20100428 [ 0.119779] Setting APIC routing to physical flat [ 0.124259] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.128000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.128000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.128000] ..... (found apic 0 pin 2) ... [ 0.128000] ....... failed. [ 0.128000] ...trying to set up timer as Virtual Wire IRQ... [ 0.169681] ..... works. [ 0.172005] CPU0: Intel(R) Xeon(TM) MP CPU 3.16GHz stepping 01 [ 0.188000] lockdep: fixing up alternatives. [ 0.188133] Booting Node 0, Processors #1 Ok. [ 0.288089] Brought up 2 CPUs [ 0.292006] Total of 2 processors activated (12676.86 BogoMIPS). [ 0.300923] khelper used greatest stack depth: 5864 bytes left [ 0.305017] khelper used greatest stack depth: 5176 bytes left [ 0.325510] NET: Registered protocol family 16 [ 0.341322] ACPI: bus type pci registered [ 0.344474] PCI: Using configuration type 1 for base access [ 0.359165] bio: create slab <bio-0> at 0 [ 0.478153] ACPI: Interpreter enabled [ 0.488006] ACPI: (supports S0 S5) [ 0.497875] ACPI: Using IOAPIC for interrupt routing [ 0.548145] ACPI: No dock devices found. [ 0.552176] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.556263] ACPI: PCI Root Bridge [VP00] (domain 0000 [bus 00]) [ 0.568051] ACPI: PCI Root Bridge [VP01] (domain 0000 [bus 01]) [ 0.576336] ACPI: PCI Root Bridge [VP02] (domain 0000 [bus 02-03]) [ 0.596889] ACPI: PCI Root Bridge [VP03] (domain 0000 [bus 04-05]) [ 0.605222] ACPI: PCI Root Bridge [VP04] (domain 0000 [bus 06-07]) [ 0.613530] ACPI: PCI Root Bridge [VP05] (domain 0000 [bus 08-09]) [ 0.617658] ACPI: PCI Root Bridge [VP06] (domain 0000 [bus 0a-0b]) [ 0.621672] ACPI: PCI Root Bridge [VP07] (domain 0000 [bus 0c-0d]) [ 0.625948] HEST: Table is not found! James -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
