From: Zhao Yakui <yakui.zhao@xxxxxxxxx>
ACPI 4.0 spec adds the ACPI IPMI opregion, which means that the ACPI AML
code can also communicate with the BMC controller. This is to install
the ACPI IPMI opregion and enable the ACPI to access the BMC controller
through the IPMI message.
It will create IPMI user interface for every IPMI device detected
in ACPI namespace and install the corresponding IPMI opregion space handler.
Then it can enable ACPI to access the BMC controller through the IPMI
message.
The following describes how to process the IPMI request in IPMI space handler:
1. format the IPMI message based on the request in AML code.
IPMI system address. Now the address type is SYSTEM_INTERFACE_ADDR_TYPE
IPMI net function & command
IPMI message payload
2. send the IPMI message by using the function of ipmi_request_settime
3. wait for the completion of IPMI message. It can be done in different
routes: One is in handled in IPMI user recv callback function. Another is
handled in timeout function.
4. format the IPMI response and return it to ACPI AML code.
Signed-off-by: Zhao Yakui <yakui.zhao@xxxxxxxxx>
cc: Bjorn Helgaas <bjorn.helgaas@xxxxxx>
---
drivers/char/ipmi/ipmi_si_intf.c | 461 +++++++++++++++++++++++++++++++++++++-
1 files changed, 457 insertions(+), 4 deletions(-)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 35603dd..87b5722 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -65,7 +65,7 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/pnp.h>
-
+#include <linux/ipmi.h>
#ifdef CONFIG_PPC_OF
#include <linux/of_device.h>
#include <linux/of_platform.h>
@@ -1894,6 +1894,429 @@ static __devinit void hardcode_find_bmc(void)
#include <linux/acpi.h>
+#define IPMI_FLAGS_HANDLER_INSTALL 0
+#define ACPI_IPMI_OK 0
+#define ACPI_IPMI_TIMEOUT 0x10
+#define ACPI_IPMI_UNKNOWN 0x07
+/* the IPMI timeout is 30s */
+#define IPMI_TIMEOUT (30 * HZ)
+
+struct acpi_ipmi_device {
+ acpi_handle handle;
+ /* the device list attached to driver_data.ipmi_devices */
+ struct list_head head;
+ ipmi_user_t user_interface;
+ struct mutex mutex_lock;
+ struct list_head tx_msg_list;
+ long curr_msgid;
+ unsigned long flags;
+ int ipmi_ifnum;
+ struct smi_info *smi_info;
+ struct pnp_dev *pnp_dev;
+};
+
+struct ipmi_driver_data {
+ struct list_head ipmi_devices;
+ struct ipmi_smi_watcher bmc_events;
+ struct ipmi_user_hndl ipmi_hndlrs;
+};
+
+struct acpi_ipmi_msg {
+ /* message list */
+ struct list_head head;
+ /*
+ * General speaking the addr type should be SI_ADDR_TYPE. And
+ * the addr channel should be BMC.
+ * In fact it can also be IPMB type. But we will have to
+ * parse it from the Netfn command buffer. It is so complex
+ * that it is skipped.
+ */
+ struct ipmi_addr addr;
+ long tx_msgid;
+ /* it is used to track whether the IPMI message is finished */
+ struct completion tx_complete;
+ struct kernel_ipmi_msg tx_message;
+ int msg_done;
+ /* tx data . And copy it from ACPI object buffer */
+ u8 tx_data[64];
+ int tx_len;
+ /* get the response data */
+ u8 rx_data[64];
+ /* the response length. The netfn & cmd is excluded. */
+ int rx_len;
+ struct acpi_ipmi_device *device;
+};
+
+/* IPMI request/response buffer per ACPI 4.0, sec 5.5.2.4.3.2 */
+struct acpi_ipmi_buffer {
+ u8 status;
+ u8 length;
+ u8 data[64];
+};
+
+static void ipmi_register_bmc(int iface, struct device *dev);
+static void ipmi_bmc_gone(int iface);
+static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
+
+static struct ipmi_driver_data driver_data = {
+ .ipmi_devices = LIST_HEAD_INIT(driver_data.ipmi_devices),
+ .bmc_events = {
+ .owner = THIS_MODULE,
+ .new_smi = ipmi_register_bmc,
+ .smi_gone = ipmi_bmc_gone,
+ },
+ .ipmi_hndlrs = {
+ .ipmi_recv_hndl = ipmi_msg_handler,
+ },
+};
+
+static
+struct acpi_ipmi_msg *acpi_alloc_ipmi_msg(struct acpi_ipmi_device *ipmi)
+{
+ struct acpi_ipmi_msg *ipmi_msg;
+
+ ipmi_msg = kzalloc(sizeof(struct acpi_ipmi_msg), GFP_KERNEL);
+ if (!ipmi_msg)
+ return NULL;
+
+ init_completion(&ipmi_msg->tx_complete);
+ INIT_LIST_HEAD(&ipmi_msg->head);
+ ipmi_msg->device = ipmi;
+ return ipmi_msg;
+}
+
+#define IPMI_OP_RGN_NETFN(offset) ((offset >> 8) & 0xff)
+#define IPMI_OP_RGN_CMD(offset) (offset & 0xff)
+static void acpi_format_ipmi_msg(struct acpi_ipmi_msg *tx_msg,
+ acpi_physical_address address,
+ acpi_integer *value)
+{
+ struct kernel_ipmi_msg *msg;
+ struct acpi_ipmi_buffer *buffer;
+ struct acpi_ipmi_device *device;
+
+ /*
+ * IPMI network function and command are encoded in the address
+ * within the IPMI OpRegion; see ACPI 4.0, sec 5.5.2.4.3.
+ */
+ msg = &tx_msg->tx_message;
+ msg->netfn = IPMI_OP_RGN_NETFN(address);
+ msg->cmd = IPMI_OP_RGN_CMD(address);
+
+ msg->data = tx_msg->tx_data;
+ /*
+ * value is the parameter passed by the IPMI opregion space handler.
+ * It points to the IPMI request message buffer
+ */
+ buffer = (struct acpi_ipmi_buffer *)value;
+ /* copy the tx message data */
+ msg->data_len = buffer->length;
+ memcpy(tx_msg->tx_data, buffer->data, msg->data_len);
+ /*
+ * now the default type is SYSTEM_INTERFACE and channel type is BMC.
+ * If the netfn is APP_REQUEST and the cmd is SEND_MESSAGE,
+ * the addr type should be changed to IPMB. Then we will have to parse
+ * the IPMI request message buffer to get the IPMB address.
+ * If so, please fix me.
+ */
+ tx_msg->addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ tx_msg->addr.channel = IPMI_BMC_CHANNEL;
+ tx_msg->addr.data[0] = 0;
+
+ /* Get the msgid */
+ device = tx_msg->device;
+ mutex_lock(&device->mutex_lock);
+ device->curr_msgid++;
+ tx_msg->tx_msgid = device->curr_msgid;
+ mutex_unlock(&device->mutex_lock);
+}
+
+static void acpi_format_ipmi_response(struct acpi_ipmi_msg *msg,
+ acpi_integer *value, int timeout)
+{
+ struct acpi_ipmi_buffer *buffer;
+
+ /*
+ * value is also used as output parameter. It represents the response
+ * IPMI message returned by IPMI command.
+ */
+ buffer = (struct acpi_ipmi_buffer *)value;
+ if (!timeout) {
+ buffer->status = ACPI_IPMI_TIMEOUT;
+ return;
+ }
+ /*
+ * If the flag of msg_done is not set, it means that the IPMI command
+ * is not executed correctly.
+ * The status will be ACPI_IPMI_UNKNOWN.
+ */
+ if (!msg->msg_done) {
+ buffer->status = ACPI_IPMI_UNKNOWN;
+ return;
+ }
+
+ buffer->status = ACPI_IPMI_OK;
+ buffer->length = msg->rx_len;
+ memcpy(buffer->data, msg->rx_data, msg->rx_len);
+}
+
+static void ipmi_destroy_tx_msg(struct acpi_ipmi_device *ipmi)
+{
+ struct acpi_ipmi_msg *tx_msg = NULL, *temp;
+ int count = 20;
+ struct pnp_dev *dev;
+
+ dev = ipmi->pnp_dev;
+
+ list_for_each_entry_safe(tx_msg, temp, &ipmi->tx_msg_list, head) {
+ /* wake up the sleep thread on the Tx msg */
+ complete(&tx_msg->tx_complete);
+ }
+ /* wait for about 20 ticks to flush the tx message list */
+ while (count--) {
+ if (list_empty(&ipmi->tx_msg_list))
+ break;
+ schedule_timeout(1);
+ }
+ if (!list_empty(&ipmi->tx_msg_list))
+ dev_warn(&dev->dev, "tx msg list is not NULL\n");
+
+}
+
+static void ipmi_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data)
+{
+ struct acpi_ipmi_device *ipmi_device = user_msg_data;
+ int msg_found = 0;
+ struct acpi_ipmi_msg *tx_msg;
+ struct pnp_dev *dev;
+
+ dev = ipmi_device->pnp_dev;
+
+ if (msg->user != ipmi_device->user_interface) {
+ dev_warn(&dev->dev, "Incorrect IPMI user\n");
+ ipmi_free_recv_msg(msg);
+ return;
+ }
+ mutex_lock(&ipmi_device->mutex_lock);
+ list_for_each_entry(tx_msg, &ipmi_device->tx_msg_list, head) {
+ if (msg->msgid == tx_msg->tx_msgid) {
+ msg_found = 1;
+ break;
+ }
+ }
+
+ mutex_unlock(&ipmi_device->mutex_lock);
+ if (!msg_found) {
+ /* no matched msg is found . But we should free it */
+ ipmi_free_recv_msg(msg);
+ dev_warn(&dev->dev, "Incorrect MSG is found \n");
+ return;
+ }
+
+ if (msg->msg.data_len) {
+ /* copy the response data to Rx_data buffer */
+ memcpy(tx_msg->rx_data, msg->msg_data, msg->msg.data_len);
+ tx_msg->rx_len = msg->msg.data_len;
+ tx_msg->msg_done = 1;
+ }
+ complete(&tx_msg->tx_complete);
+ ipmi_free_recv_msg(msg);
+};
+
+static void ipmi_register_bmc(int iface, struct device *dev)
+{
+ struct acpi_ipmi_device *ipmi_device, *temp;
+ struct pnp_dev *device;
+ ipmi_user_t user;
+ int err;
+
+ if (list_empty(&driver_data.ipmi_devices))
+ return;
+
+ list_for_each_entry_safe(ipmi_device, temp,
+ &driver_data.ipmi_devices, head) {
+ /*
+ * Only one user interface is allowed to be registered
+ * for one IPMI device.
+ * If we already create the user interface for
+ * one IPMI device, skip it
+ */
+ if (ipmi_device->user_interface)
+ continue;
+
+ device = ipmi_device->pnp_dev;
+ /*
+ * If the dev is identical to the ACPI device,
+ * create the user interface.
+ */
+ if (dev == &device->dev) {
+ err = ipmi_create_user(iface, &driver_data.ipmi_hndlrs,
+ ipmi_device, &user);
+ if (err == 0) {
+ ipmi_device->user_interface = user;
+ ipmi_device->ipmi_ifnum = iface;
+ }
+ }
+ }
+}
+
+static void ipmi_bmc_gone(int iface)
+{
+ struct acpi_ipmi_device *ipmi_device, *temp;
+
+ if (list_empty(&driver_data.ipmi_devices))
+ return;
+
+ list_for_each_entry_safe(ipmi_device, temp,
+ &driver_data.ipmi_devices, head) {
+ if (ipmi_device->user_interface &&
+ (ipmi_device->ipmi_ifnum == iface)) {
+ ipmi_destroy_user(ipmi_device->user_interface);
+ ipmi_device->user_interface = NULL;
+ ipmi_destroy_tx_msg(ipmi_device);
+ }
+ }
+}
+/* --------------------------------------------------------------------------
+ * Address Space Management
+ -------------------------------------------------------------------------- */
+/*
+ * This is the IPMI opregion space handler.
+ * @function: indicates the read/write. In fact as the IPMI message is driven
+ * by command, only write is meaningful.
+ * @address: This contains the netfn/command of IPMI request message.
+ * @bits : not used.
+ * @value : it is an in/out parameter. It points to the IPMI message buffer.
+ * Before the IPMI message is sent, it represents the actual request
+ * IPMI message. After the IPMI message is finished, it represents
+ * the response IPMI message returned by IPMI command.
+ * @handler_context: IPMI device context.
+ */
+
+static acpi_status
+acpi_ipmi_space_handler(u32 function, acpi_physical_address address,
+ u32 bits, acpi_integer *value,
+ void *handler_context, void *region_context)
+{
+ struct acpi_ipmi_msg *tx_msg = NULL;
+ struct acpi_ipmi_device *ipmi_device =
+ (struct acpi_ipmi_device *) handler_context;
+ int err;
+ acpi_status status;
+
+ /*
+ * IPMI opregion message.
+ * IPMI message is firstly written to the BMC and system software
+ * can get the respsonse. So it is unmeaningful for the IPMI read
+ * access.
+ */
+ if ((function & ACPI_IO_MASK) == ACPI_READ)
+ return AE_TYPE;
+
+ if (!ipmi_device->user_interface)
+ return AE_NOT_EXIST;
+
+ tx_msg = acpi_alloc_ipmi_msg(ipmi_device);
+ if (!tx_msg)
+ return AE_NO_MEMORY;
+
+ acpi_format_ipmi_msg(tx_msg, address, value);
+ mutex_lock(&ipmi_device->mutex_lock);
+ list_add_tail(&tx_msg->head, &ipmi_device->tx_msg_list);
+ mutex_unlock(&ipmi_device->mutex_lock);
+ err = ipmi_request_settime(ipmi_device->user_interface,
+ &tx_msg->addr,
+ tx_msg->tx_msgid,
+ &tx_msg->tx_message,
+ NULL, 0, 0, 0);
+ if (err) {
+ status = AE_ERROR;
+ goto end_label;
+ }
+ err = wait_for_completion_timeout(&tx_msg->tx_complete, IPMI_TIMEOUT);
+
+ acpi_format_ipmi_response(tx_msg, value, err);
+ status = AE_OK;
+
+end_label:
+ mutex_lock(&ipmi_device->mutex_lock);
+ list_del(&tx_msg->head);
+ mutex_unlock(&ipmi_device->mutex_lock);
+ kfree(tx_msg);
+ return status;
+}
+
+static void ipmi_remove_handler(struct acpi_ipmi_device *ipmi)
+{
+ if (!test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags))
+ return;
+
+ acpi_remove_address_space_handler(ipmi->handle,
+ ACPI_ADR_SPACE_IPMI, &acpi_ipmi_space_handler);
+
+ clear_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags);
+}
+
+static int ipmi_install_handler(struct acpi_ipmi_device *ipmi)
+{
+ acpi_status status;
+
+ if (test_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags))
+ return 0;
+
+ status = acpi_install_address_space_handler(ipmi->handle,
+ ACPI_ADR_SPACE_IPMI,
+ &acpi_ipmi_space_handler,
+ NULL, ipmi);
+ if (ACPI_FAILURE(status)) {
+ struct pnp_dev *dev;
+ dev = ipmi->pnp_dev;
+ dev_err(&dev->dev, "Can't register IPMI opregion for %s\n",
+ pnp_dev_name(dev));
+ return -EINVAL;
+ }
+
+ set_bit(IPMI_FLAGS_HANDLER_INSTALL, &ipmi->flags);
+
+ return 0;
+}
+
+static void acpi_register_ipmi_handler(struct acpi_ipmi_device *ipmi_device)
+{
+ if (list_empty(&driver_data.ipmi_devices)) {
+ /*
+ * when we try to register the first IPI0001 device, register
+ * the smi_watcher.
+ */
+ ipmi_smi_watcher_register(&driver_data.bmc_events);
+ }
+
+ mutex_init(&ipmi_device->mutex_lock);
+ INIT_LIST_HEAD(&ipmi_device->tx_msg_list);
+
+ ipmi_install_handler(ipmi_device);
+
+ list_add(&ipmi_device->head, &driver_data.ipmi_devices);
+}
+
+static void acpi_remove_ipmi_handler(struct acpi_ipmi_device *ipmi_device)
+{
+ if (ipmi_device->user_interface) {
+ ipmi_destroy_user(ipmi_device->user_interface);
+ ipmi_device->user_interface = NULL;
+ }
+ list_del(&ipmi_device->head);
+
+ if (!list_empty(&ipmi_device->tx_msg_list))
+ ipmi_destroy_tx_msg(ipmi_device);
+
+ ipmi_remove_handler(ipmi_device);
+
+ if (list_empty(&driver_data.ipmi_devices))
+ ipmi_smi_watcher_unregister(&driver_data.bmc_events);
+
+}
+
/*
* Once we get an ACPI failure, we don't try any more, because we go
* through the tables sequentially. Once we don't find a table, there
@@ -2118,6 +2541,8 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
acpi_handle handle;
acpi_status status;
unsigned long long tmp;
+ int ret;
+ struct acpi_ipmi_device *p_ipmi;
acpi_dev = pnp_acpi_device(dev);
if (!acpi_dev)
@@ -2127,6 +2552,12 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
if (!info)
return -ENOMEM;
+ p_ipmi = kzalloc(sizeof(*p_ipmi), GFP_KERNEL);
+ if (!p_ipmi) {
+ kfree(info);
+ return -ENOMEM;
+ }
+
info->addr_source = SI_ACPI;
printk(KERN_INFO PFX "probing via ACPI\n");
@@ -2184,24 +2615,46 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
}
info->dev = &dev->dev;
- pnp_set_drvdata(dev, info);
+
+ p_ipmi->smi_info = info;
+
+ p_ipmi->handle = handle;
+ p_ipmi->ipmi_ifnum = -1;
+ p_ipmi->pnp_dev = dev;
+
+ pnp_set_drvdata(dev, p_ipmi);
+ acpi_register_ipmi_handler(p_ipmi);
dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
res, info->io.regsize, info->io.regspacing,
info->irq);
- return add_smi(info);
+ ret = add_smi(info);
+ if (!ret)
+ return ret;
+ else {
+ acpi_remove_ipmi_handler(p_ipmi);
+ pnp_set_drvdata(dev, NULL);
+ }
err_free:
+ kfree(p_ipmi);
kfree(info);
return -EINVAL;
}
static void __devexit ipmi_pnp_remove(struct pnp_dev *dev)
{
- struct smi_info *info = pnp_get_drvdata(dev);
+ struct acpi_ipmi_device *p_ipmi;
+ struct smi_info *info;
+
+ p_ipmi = pnp_get_drvdata(dev);
+ info = p_ipmi->smi_info;
cleanup_one_si(info);
+ acpi_remove_ipmi_handler(p_ipmi);
+ pnp_set_drvdata(dev, NULL);
+ kfree(p_ipmi);
}
static const struct pnp_device_id pnp_dev_table[] = {
--
1.5.4.5
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
