[PATCH] ACPICA: Handle large field appertures.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Alexey Starikovskiy <astarikovskiy@xxxxxxx>
---

 source/components/executer/exfldio.c |   67 ++++++++++++++++++++++------------
 source/components/executer/exprep.c  |   12 +++++-
 source/include/acobject.h            |    3 +-
 3 files changed, 54 insertions(+), 28 deletions(-)


diff --git a/source/components/executer/exfldio.c b/source/components/executer/exfldio.c
index 3276bc4..2e70763 100644
--- a/source/components/executer/exfldio.c
+++ b/source/components/executer/exfldio.c
@@ -233,9 +233,8 @@ AcpiExSetupRegion (
      * (Region length is specified in bytes)
      */
     if (RgnDesc->Region.Length <
-            (ObjDesc->CommonField.BaseByteOffset +
-            FieldDatumByteOffset +
-            ObjDesc->CommonField.AccessByteWidth))
+            (ObjDesc->CommonField.BaseByteOffset + FieldDatumByteOffset +
+             ObjDesc->CommonField.AccessByteWidth))
     {
         if (AcpiGbl_EnableInterpreterSlack)
         {
@@ -795,6 +794,7 @@ AcpiExExtractFromField (
     UINT32                  DatumCount;
     UINT32                  FieldDatumCount;
     UINT32                  i;
+    UINT32                  AccessBitWidth;
 
 
     ACPI_FUNCTION_TRACE (ExExtractFromField);
@@ -802,8 +802,7 @@ AcpiExExtractFromField (
 
     /* Validate target buffer and clear it */
 
-    if (BufferLength <
-            ACPI_ROUND_BITS_UP_TO_BYTES (ObjDesc->CommonField.BitLength))
+    if (BufferLength < ACPI_ROUND_BITS_UP_TO_BYTES (ObjDesc->CommonField.BitLength))
     {
         ACPI_ERROR ((AE_INFO,
             "Field size %u (bits) is too large for buffer (%u)",
@@ -813,15 +812,30 @@ AcpiExExtractFromField (
     }
     ACPI_MEMSET (Buffer, 0, BufferLength);
 
+    /* Simple case handling */
+    AccessBitWidth = ACPI_MUL_8(ObjDesc->CommonField.AccessByteWidth);
+    if (ObjDesc->CommonField.StartFieldBitOffset == 0 &&
+        ObjDesc->CommonField.BitLength == AccessBitWidth)
+    {
+        Status = AcpiExFieldDatumIo (ObjDesc, 0, Buffer, ACPI_READ);
+        return_ACPI_STATUS(Status);
+    }
+
+    /* Algo is limited to sizeof(UINT64), so cut the AccessByteWidth */
+    if (ObjDesc->CommonField.AccessByteWidth > sizeof(UINT64))
+    {
+        ObjDesc->CommonField.AccessByteWidth = sizeof(UINT64);
+        AccessBitWidth = ACPI_MUL_8(ObjDesc->CommonField.AccessByteWidth);
+    }
+
     /* Compute the number of datums (access width data items) */
 
     DatumCount = ACPI_ROUND_UP_TO (
-                        ObjDesc->CommonField.BitLength,
-                        ObjDesc->CommonField.AccessBitWidth);
+                        ObjDesc->CommonField.BitLength, AccessBitWidth);
     FieldDatumCount = ACPI_ROUND_UP_TO (
                         ObjDesc->CommonField.BitLength +
                         ObjDesc->CommonField.StartFieldBitOffset,
-                        ObjDesc->CommonField.AccessBitWidth);
+                        AccessBitWidth);
 
     /* Priming read from the field */
 
@@ -854,12 +868,11 @@ AcpiExExtractFromField (
          * This avoids the differences in behavior between different compilers
          * concerning shift values larger than the target data width.
          */
-        if ((ObjDesc->CommonField.AccessBitWidth -
-            ObjDesc->CommonField.StartFieldBitOffset) < ACPI_INTEGER_BIT_SIZE)
+        if (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset <
+                ACPI_INTEGER_BIT_SIZE)
         {
             MergedDatum |= RawDatum <<
-                (ObjDesc->CommonField.AccessBitWidth -
-                    ObjDesc->CommonField.StartFieldBitOffset);
+                (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset);
         }
 
         if (i == DatumCount)
@@ -879,8 +892,7 @@ AcpiExExtractFromField (
 
     /* Mask off any extra bits in the last datum */
 
-    BufferTailBits = ObjDesc->CommonField.BitLength %
-                        ObjDesc->CommonField.AccessBitWidth;
+    BufferTailBits = ObjDesc->CommonField.BitLength % AccessBitWidth;
     if (BufferTailBits)
     {
         MergedDatum &= ACPI_MASK_BITS_ABOVE (BufferTailBits);
@@ -928,6 +940,7 @@ AcpiExInsertIntoField (
     UINT32                  FieldDatumCount;
     UINT32                  i;
     UINT32                  RequiredLength;
+    UINT32                  AccessBitWidth;
     void                    *NewBuffer;
 
 
@@ -965,18 +978,26 @@ AcpiExInsertIntoField (
         BufferLength = RequiredLength;
     }
 
+    /* Algo is limited to sizeof(UINT64), so cut the AccessByteWidth */
+    if (ObjDesc->CommonField.AccessByteWidth > sizeof(UINT64))
+    {
+        ObjDesc->CommonField.AccessByteWidth = sizeof(UINT64);
+    }
+
+    AccessBitWidth = ACPI_MUL_8(ObjDesc->CommonField.AccessByteWidth);
+
     /*
      * Create the bitmasks used for bit insertion.
      * Note: This if/else is used to bypass compiler differences with the
      * shift operator
      */
-    if (ObjDesc->CommonField.AccessBitWidth == ACPI_INTEGER_BIT_SIZE)
+    if (AccessBitWidth == ACPI_INTEGER_BIT_SIZE)
     {
         WidthMask = ACPI_UINT64_MAX;
     }
     else
     {
-        WidthMask = ACPI_MASK_BITS_ABOVE (ObjDesc->CommonField.AccessBitWidth);
+        WidthMask = ACPI_MASK_BITS_ABOVE (AccessBitWidth);
     }
 
     Mask = WidthMask &
@@ -985,11 +1006,11 @@ AcpiExInsertIntoField (
     /* Compute the number of datums (access width data items) */
 
     DatumCount = ACPI_ROUND_UP_TO (ObjDesc->CommonField.BitLength,
-                    ObjDesc->CommonField.AccessBitWidth);
+                    AccessBitWidth);
 
     FieldDatumCount = ACPI_ROUND_UP_TO (ObjDesc->CommonField.BitLength +
                         ObjDesc->CommonField.StartFieldBitOffset,
-                        ObjDesc->CommonField.AccessBitWidth);
+                        AccessBitWidth);
 
     /* Get initial Datum from the input buffer */
 
@@ -1024,12 +1045,11 @@ AcpiExInsertIntoField (
          * This avoids the differences in behavior between different compilers
          * concerning shift values larger than the target data width.
          */
-        if ((ObjDesc->CommonField.AccessBitWidth -
-            ObjDesc->CommonField.StartFieldBitOffset) < ACPI_INTEGER_BIT_SIZE)
+        if (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset <
+                ACPI_INTEGER_BIT_SIZE)
         {
             MergedDatum = RawDatum >>
-                (ObjDesc->CommonField.AccessBitWidth -
-                    ObjDesc->CommonField.StartFieldBitOffset);
+                (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset);
         }
         else
         {
@@ -1055,8 +1075,7 @@ AcpiExInsertIntoField (
     /* Mask off any extra bits in the last datum */
 
     BufferTailBits = (ObjDesc->CommonField.BitLength +
-            ObjDesc->CommonField.StartFieldBitOffset) %
-                ObjDesc->CommonField.AccessBitWidth;
+            ObjDesc->CommonField.StartFieldBitOffset) % AccessBitWidth;
     if (BufferTailBits)
     {
         Mask &= ACPI_MASK_BITS_ABOVE (BufferTailBits);
diff --git a/source/components/executer/exprep.c b/source/components/executer/exprep.c
index 0709676..95fa502 100644
--- a/source/components/executer/exprep.c
+++ b/source/components/executer/exprep.c
@@ -455,8 +455,6 @@ AcpiExPrepCommonFieldObject (
     ObjDesc->CommonField.AccessByteWidth = (UINT8)
             ACPI_DIV_8 (AccessBitWidth);            /* 1,  2,  4,  8 */
 
-    ObjDesc->CommonField.AccessBitWidth = (UINT8) AccessBitWidth;
-
     /*
      * BaseByteOffset is the address of the start of the field within the
      * region.  It is the byte address of the first *datum* (field-width data
@@ -567,6 +565,16 @@ AcpiExPrepFieldValue (
 
         ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode);
 
+	/* allow full data read from EC address space */
+	if (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) {
+	    if (ObjDesc->CommonField.BitLength > 8) {
+		ObjDesc->CommonField.AccessByteWidth =
+		    ACPI_ROUND_BITS_UP_TO_BYTES(ObjDesc->CommonField.BitLength);
+	    }
+	}
+
+
+	
         /* An additional reference for the container */
 
         AcpiUtAddReference (ObjDesc->Field.RegionObj);
diff --git a/source/include/acobject.h b/source/include/acobject.h
index cb6e199..e9c3d0a 100644
--- a/source/include/acobject.h
+++ b/source/include/acobject.h
@@ -381,12 +381,11 @@ typedef struct acpi_object_thermal_zone
     UINT8                           FieldFlags;         /* Access, update, and lock bits */\
     UINT8                           Attribute;          /* From AccessAs keyword */\
     UINT8                           AccessByteWidth;    /* Read/Write size in bytes */\
+    UINT8                           StartFieldBitOffset;/* Bit offset within first field datum (0-63) */\
     ACPI_NAMESPACE_NODE             *Node;              /* Link back to parent node */\
     UINT32                          BitLength;          /* Length of field in bits */\
     UINT32                          BaseByteOffset;     /* Byte offset within containing object */\
     UINT32                          Value;              /* Value to store into the Bank or Index register */\
-    UINT8                           StartFieldBitOffset;/* Bit offset within first field datum (0-63) */\
-    UINT8                           AccessBitWidth;     /* Read/Write size in bits (8-64) */
 
 
 typedef struct acpi_object_field_common                 /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux