Apparently I made a mistake. Not realizing that DMI_MATCH does not do an exact match. Patch looks good. On Fri, 2010-04-23 at 16:41 -0500, Jerone Young wrote: > You made a small mistake..point out below. > > **mumble** .. still not a fan of quirk tables when a bios coming out to > resolve this issue is coming out..one out for T410 came out yesterday. > > On Fri, 2010-04-23 at 10:20 -0600, Alex Chiang wrote: > > Multiple Lenovo ThinkPad models with Intel Core i5/i7 CPUs can > > successfully suspend/resume once, and then hang on the second s/r > > cycle. > > > > We got confirmation that this was due to a BIOS defect. The BIOS > > did not properly set SCI_EN coming out of S3. The BIOS guys > > hinted that The Other Leading OS ignores the fact that hardware > > owns the bit and sets it manually. > > > > In any case, an existing DMI table exists for machines where this > > defect is a known problem. Lenovo promise to fix their BIOS, but > > for folks who either won't or can't upgrade their BIOS, allow > > Linux to workaround the issue. > > > > Confirmed by numerous testers in the launchpad bug that using > > acpi_sleep=sci_force_enable fixes the issue. We add the machines > > to acpisleep_dmi_table[] to automatically enable this workaround. > > > > https://bugzilla.kernel.org/show_bug.cgi?id=15407 > > BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/532374 > > > > Cc: stable@xxxxxxxxxx > > Signed-off-by: Alex Chiang <achiang@xxxxxxxxxxxxx> > > --- > > We want to get this patch upstream so that we can get it into > > -stable. Matthew Garrett's patch titled "Fall back to manually > > changing SCI_EN" is the plan for dealing with future platforms > > that will likely have this same BIOS bug. > > > > v1 -> v2: > > - remove separate X201s entry, as the X201 entry will match it too > > --- > > sleep.c | 32 ++++++++++++++++++++++++++++++++ > > 1 file changed, 32 insertions(+) > > --- > > diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c > > index f74834a..317794f 100644 > > --- a/drivers/acpi/sleep.c > > +++ b/drivers/acpi/sleep.c > > @@ -450,6 +450,38 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { > > }, > > }, > > { > > + .callback = init_set_sci_en_on_resume, > > + .ident = "Lenovo ThinkPad T410", > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), > > + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T410"), > > + }, > > + }, > > + { > > + .callback = init_set_sci_en_on_resume, > > + .ident = "Lenovo ThinkPad T510", > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), > > + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T510"), > > + }, > > + }, > > + { > > + .callback = init_set_sci_en_on_resume, > > + .ident = "Lenovo ThinkPad W510", > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), > > + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad W510"), > > + }, > > + }, > > + { > > + .callback = init_set_sci_en_on_resume, > > + .ident = "Lenovo ThinkPad X201[s]", > > + .matches = { > > + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), > > + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201"), > > The X201s identifies it's self as an X201s .. So you would need two > separate entries. > > Here is dmidecode data from a X201s: > http://launchpadlibrarian.net/45050202/dmidecode > > > > + }, > > + }, > > + { > > .callback = init_old_suspend_ordering, > > .ident = "Panasonic CF51-2L", > > .matches = { > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > > the body of a message to majordomo@xxxxxxxxxxxxxxx > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html