Per ACPI spec, _ERG method should be executed before device driver gets control for hotpluged device. Firmware might do some configuration there. See http://bugzilla.kernel.org/show_bug.cgi?id=10805. In this machine, _REG method of docked device will configure cardbus bridge. Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx> Tested-by: Paul Martin <pm@xxxxxxxxxx> --- drivers/pci/hotplug/acpiphp_glue.c | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index cb2fd01..b5dad9f 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -749,6 +749,24 @@ static int acpiphp_bus_trim(acpi_handle handle) return retval; } +static void acpiphp_set_acpi_region(struct acpiphp_slot *slot) +{ + struct acpiphp_func *func; + union acpi_object params[2]; + struct acpi_object_list arg_list; + + list_for_each_entry(func, &slot->funcs, sibling) { + arg_list.count = 2; + arg_list.pointer = params; + params[0].type = ACPI_TYPE_INTEGER; + params[0].integer.value = ACPI_ADR_SPACE_PCI_CONFIG; + params[1].type = ACPI_TYPE_INTEGER; + params[1].integer.value = 1; + /* _REG is optional, we don't care about if there is failure */ + acpi_evaluate_object(func->handle, "_REG", &arg_list, NULL); + } +} + /** * enable_device - enable, configure a slot * @slot: slot to be enabled @@ -805,6 +823,7 @@ static int __ref enable_device(struct acpiphp_slot *slot) pci_bus_assign_resources(bus); acpiphp_sanitize_bus(bus); acpiphp_set_hpp_values(bus); + acpiphp_set_acpi_region(slot); pci_enable_bridges(bus); pci_bus_add_devices(bus); -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
