[PATCH] ACPI thermal: Don't invalidate thermal zone if critical trip point is bad

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some BIOSes return a negative value for the critical trip point.
We currently invalidate the whole thermal zone in this case.
But it may still be needed for cooling, also without critical
trip point:


Same if there is no critical trip point, but ACPI spec says
there must at least be one trip point, it need not to be a
critical (see next patch).

Reference: http://bugzilla.novell.com/show_bug.cgi?id=531547

Signed-off-by: Thomas Renninger <trenn@xxxxxxx>
Tested-by: clarkt@xxxxxxxx
CC: Len Brown <lenb@xxxxxxxxxx>
CC: linux-acpi@xxxxxxxxxxxxxxx
---
 drivers/acpi/thermal.c |   18 ++++++++++--------
 1 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9073ada..8fa71b8 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -368,7 +368,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 	int valid = 0;
 	int i;
 
-	/* Critical Shutdown (required) */
+	/* Critical Shutdown */
 	if (flag & ACPI_TRIPS_CRITICAL) {
 		status = acpi_evaluate_integer(tz->device->handle,
 				"_CRT", NULL, &tmp);
@@ -379,17 +379,19 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 		 * Below zero (Celsius) values clearly aren't right for sure..
 		 * ... so lets discard those as invalid.
 		 */
-		if (ACPI_FAILURE(status) ||
-				tz->trips.critical.temperature <= 2732) {
+		if (ACPI_FAILURE(status)) {
+			tz->trips.critical.flags.valid = 0;
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "No critical threshold\n"));
+		} else if (tmp <= 2732) {
+			printk(KERN_WARNING FW_BUG "Invalid critical threshold "
+			       "(_CRT:%)\n", tmp);
 			tz->trips.critical.flags.valid = 0;
-			ACPI_EXCEPTION((AE_INFO, status,
-					"No or invalid critical threshold"));
-			return -ENODEV;
 		} else {
 			tz->trips.critical.flags.valid = 1;
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					"Found critical threshold [%lu]\n",
-					tz->trips.critical.temperature));
+					  "Found critical threshold [%lu]\n",
+					  tz->trips.critical.temperature));
 		}
 		if (tz->trips.critical.flags.valid == 1) {
 			if (crt == -1) {
-- 
1.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux