Re: [RFC][PATCH 0/3] Introduce GPE refcounting (was: Re: Recent GPE patches - some questions.)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 11 February 2010, Maxim Levitsky wrote:
> On Wed, 2010-02-10 at 22:36 +0100, Rafael J. Wysocki wrote: 
> > On Wednesday 10 February 2010, Maxim Levitsky wrote:
> > > On Sun, 2010-02-07 at 03:17 +0100, Rafael J. Wysocki wrote: 
> > > > On Sunday 07 February 2010, Rafael J. Wysocki wrote:
> > > > > Hi,
> > > > > 
> > > > > On Wednesday 03 February 2010, Moore, Robert wrote:
> > > > > > Matthew, 
> > > > > > 
> > > > > > Thanks for your response to my questions.
> > > > > > 
> > > > > > I've been thinking about these interfaces:
> > > > > > 
> > > > > > acpi_ref_runtime_gpe
> > > > > > acpi_ref_wakeup_gpe
> > > > > > acpi_unref_runtime_gpe
> > > > > > acpi_unref_wakeup_gpe
> > > > > > 
> > > 
> > > One minor, mostly off-topic question.
> > > Currently to enable static wakeup one has to write /proc/acpi/wakeup.
> > 
> > That depends on the device.  For PCI devices there's another interface for
> > that, which is /sys/devices/.../power/wakeup .
> > 
> > > Do you consider propagating device wakeup settings to acpi,
> > > so /proc/acpi/wakeup could finally be deprecated?
> > 
> > We already do that for PCI devices.
> 
> Not in 2.6.33-rc6
> 
> maxim@maxim-laptop:~$ cat /proc/acpi/wakeup 
> Device S-state   Status   Sysfs node
> UHC1   S3 disabled  pci:0000:00:1d.0
> UHC2   S3 disabled  pci:0000:00:1d.1
> UHC3   S3 disabled  pci:0000:00:1d.2
> UHC4   S3 disabled  pci:0000:00:1a.0
> UHC5   S3 disabled  pci:0000:00:1a.1
> EHC1   S3 disabled  pci:0000:00:1d.7
> EHC2   S3 disabled  pci:0000:00:1a.7
> EXP3   S4 disabled  pci:0000:00:1c.2
> EXP5   S4 disabled  
> EXP6   S4 disabled  
> AZAL   S4 disabled  pci:0000:00:1b.0
> MODM   S4 disabled  
> 
> maxim@maxim-laptop:~$ echo enabled | sudo tee  /sys/devices/pci0000
> \:00/0000\:00\:1d.0/power/wakeup 
> enabled
> 
> cat /sys/devices/pci0000\:00/0000\:00\:1d.0/power/wakeup enabled
> 
> 
> maxim@maxim-laptop:~$ cat /proc/acpi/wakeup 
> Device S-state   Status   Sysfs node
> UHC1   S3 disabled  pci:0000:00:1d.0
> UHC2   S3 disabled  pci:0000:00:1d.1
> UHC3   S3 disabled  pci:0000:00:1d.2
> UHC4   S3 disabled  pci:0000:00:1a.0
> UHC5   S3 disabled  pci:0000:00:1a.1
> EHC1   S3 disabled  pci:0000:00:1d.7
> EHC2   S3 disabled  pci:0000:00:1a.7
> EXP3   S4 disabled  pci:0000:00:1c.2
> EXP5   S4 disabled  
> EXP6   S4 disabled  
> AZAL   S4 disabled  pci:0000:00:1b.0
> MODM   S4 disabled  
> 
> 
> Or am I mistaken somehow?

You are.  Please ignore the "Status" column in /proc/acpi/wakeup, it shows
the value of a flag that's not used for PCI devices (unless you set it via
/proc/acpi/wakeup).

Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux