Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---
drivers/input/misc/Kconfig | 1
drivers/input/misc/dm355evm_keys.c | 150 +++++++++++++-----------------------
2 files changed, 57 insertions(+), 94 deletions(-)
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index d25ecbb..16ec523 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -282,6 +282,7 @@ config INPUT_RB532_BUTTON
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
+ select INPUT_SPARSEKMAP
help
Supports the pushbuttons and IR remote used with
the DM355 EVM board.
diff --git a/drivers/input/misc/dm355evm_keys.c b/drivers/input/misc/dm355evm_keys.c
index f2b67dc..09a2815 100644
--- a/drivers/input/misc/dm355evm_keys.c
+++ b/drivers/input/misc/dm355evm_keys.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
@@ -33,12 +34,8 @@ struct dm355evm_keys {
int irq;
};
-/* These initial keycodes can be remapped by dm355evm_setkeycode(). */
-static struct {
- u16 event;
- u16 keycode;
-} dm355evm_keys[] = {
-
+/* These initial keycodes can be remapped */
+static const struct key_entry dm355evm_keys[] = {
/*
* Pushbuttons on the EVM board ... note that the labels for these
* are SW10/SW11/etc on the PC board. The left/right orientation
@@ -47,11 +44,11 @@ static struct {
* is to the right. (That is, rotate the board counter-clockwise
* by 90 degrees from the SW10/etc and "DM355 EVM" labels.)
*/
- { 0x00d8, KEY_OK, }, /* SW12 */
- { 0x00b8, KEY_UP, }, /* SW13 */
- { 0x00e8, KEY_DOWN, }, /* SW11 */
- { 0x0078, KEY_LEFT, }, /* SW14 */
- { 0x00f0, KEY_RIGHT, }, /* SW10 */
+ { KE_KEY, 0x00d8, { KEY_OK } }, /* SW12 */
+ { KE_KEY, 0x00b8, { KEY_UP } }, /* SW13 */
+ { KE_KEY, 0x00e8, { KEY_DOWN } }, /* SW11 */
+ { KE_KEY, 0x0078, { KEY_LEFT } }, /* SW14 */
+ { KE_KEY, 0x00f0, { KEY_RIGHT } }, /* SW10 */
/*
* IR buttons ... codes assigned to match the universal remote
@@ -65,35 +62,35 @@ static struct {
* RC5 codes are 14 bits, with two start bits (0x3 prefix)
* and a toggle bit (masked out below).
*/
- { 0x300c, KEY_POWER, }, /* NOTE: docs omit this */
- { 0x3000, KEY_NUMERIC_0, },
- { 0x3001, KEY_NUMERIC_1, },
- { 0x3002, KEY_NUMERIC_2, },
- { 0x3003, KEY_NUMERIC_3, },
- { 0x3004, KEY_NUMERIC_4, },
- { 0x3005, KEY_NUMERIC_5, },
- { 0x3006, KEY_NUMERIC_6, },
- { 0x3007, KEY_NUMERIC_7, },
- { 0x3008, KEY_NUMERIC_8, },
- { 0x3009, KEY_NUMERIC_9, },
- { 0x3022, KEY_ENTER, },
- { 0x30ec, KEY_MODE, }, /* "tv/vcr/..." */
- { 0x300f, KEY_SELECT, }, /* "info" */
- { 0x3020, KEY_CHANNELUP, }, /* "up" */
- { 0x302e, KEY_MENU, }, /* "in/out" */
- { 0x3011, KEY_VOLUMEDOWN, }, /* "left" */
- { 0x300d, KEY_MUTE, }, /* "ok" */
- { 0x3010, KEY_VOLUMEUP, }, /* "right" */
- { 0x301e, KEY_SUBTITLE, }, /* "cc" */
- { 0x3021, KEY_CHANNELDOWN, }, /* "down" */
- { 0x3022, KEY_PREVIOUS, },
- { 0x3026, KEY_SLEEP, },
- { 0x3172, KEY_REWIND, }, /* NOTE: docs wrongly say 0x30ca */
- { 0x3175, KEY_PLAY, },
- { 0x3174, KEY_FASTFORWARD, },
- { 0x3177, KEY_RECORD, },
- { 0x3176, KEY_STOP, },
- { 0x3169, KEY_PAUSE, },
+ { KE_KEY, 0x300c, { KEY_POWER } }, /* NOTE: docs omit this */
+ { KE_KEY, 0x3000, { KEY_NUMERIC_0 } },
+ { KE_KEY, 0x3001, { KEY_NUMERIC_1 } },
+ { KE_KEY, 0x3002, { KEY_NUMERIC_2 } },
+ { KE_KEY, 0x3003, { KEY_NUMERIC_3 } },
+ { KE_KEY, 0x3004, { KEY_NUMERIC_4 } },
+ { KE_KEY, 0x3005, { KEY_NUMERIC_5 } },
+ { KE_KEY, 0x3006, { KEY_NUMERIC_6 } },
+ { KE_KEY, 0x3007, { KEY_NUMERIC_7 } },
+ { KE_KEY, 0x3008, { KEY_NUMERIC_8 } },
+ { KE_KEY, 0x3009, { KEY_NUMERIC_9 } },
+ { KE_KEY, 0x3022, { KEY_ENTER } },
+ { KE_KEY, 0x30ec, { KEY_MODE } }, /* "tv/vcr/..." */
+ { KE_KEY, 0x300f, { KEY_SELECT } }, /* "info" */
+ { KE_KEY, 0x3020, { KEY_CHANNELUP } }, /* "up" */
+ { KE_KEY, 0x302e, { KEY_MENU } }, /* "in/out" */
+ { KE_KEY, 0x3011, { KEY_VOLUMEDOWN } }, /* "left" */
+ { KE_KEY, 0x300d, { KEY_MUTE } }, /* "ok" */
+ { KE_KEY, 0x3010, { KEY_VOLUMEUP } }, /* "right" */
+ { KE_KEY, 0x301e, { KEY_SUBTITLE } }, /* "cc" */
+ { KE_KEY, 0x3021, { KEY_CHANNELDOWN } },/* "down" */
+ { KE_KEY, 0x3022, { KEY_PREVIOUS } },
+ { KE_KEY, 0x3026, { KEY_SLEEP } },
+ { KE_KEY, 0x3172, { KEY_REWIND } }, /* NOTE: docs wrongly say 0x30ca */
+ { KE_KEY, 0x3175, { KEY_PLAY } },
+ { KE_KEY, 0x3174, { KEY_FASTFORWARD } },
+ { KE_KEY, 0x3177, { KEY_RECORD } },
+ { KE_KEY, 0x3176, { KEY_STOP } },
+ { KE_KEY, 0x3169, { KEY_PAUSE } },
};
/*
@@ -105,19 +102,18 @@ static struct {
*/
static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
{
- struct dm355evm_keys *keys = _keys;
- int status;
+ static u16 last_event;
+ struct dm355evm_keys *keys = _keys;
+ struct key_entry *ke;
+ unsigned int keycode;
+ int status;
+ u16 event;
/* For simplicity we ignore INPUT_COUNT and just read
* events until we get the "queue empty" indicator.
* Reading INPUT_LOW decrements the count.
*/
for (;;) {
- static u16 last_event;
- u16 event;
- int keycode;
- int i;
-
status = dm355evm_msp_read(DM355EVM_MSP_INPUT_HIGH);
if (status < 0) {
dev_dbg(keys->dev, "input high err %d\n",
@@ -156,14 +152,9 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
/* ignore the RC5 toggle bit */
event &= ~0x0800;
- /* find the key, or leave it as unknown */
- keycode = KEY_UNKNOWN;
- for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
- if (dm355evm_keys[i].event != event)
- continue;
- keycode = dm355evm_keys[i].keycode;
- break;
- }
+ /* find the key, or report it as unknown */
+ ke = sparse_keymap_entry_from_scancode(keys->input, event);
+ keycode = ke ? ke->keycode : KEY_UNKNOWN;
dev_dbg(keys->dev,
"input event 0x%04x--> keycode %d\n",
event, keycode);
@@ -174,36 +165,8 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
input_report_key(keys->input, keycode, 0);
input_sync(keys->input);
}
- return IRQ_HANDLED;
-}
-static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode)
-{
- u16 old_keycode;
- unsigned i;
-
- if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
- return -EINVAL;
-
- old_keycode = dm355evm_keys[index].keycode;
- dm355evm_keys[index].keycode = keycode;
- set_bit(keycode, dev->keybit);
-
- for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++) {
- if (dm355evm_keys[index].keycode == old_keycode)
- goto done;
- }
- clear_bit(old_keycode, dev->keybit);
-done:
- return 0;
-}
-
-static int dm355evm_getkeycode(struct input_dev *dev, int index, int *keycode)
-{
- if (((unsigned)index) >= ARRAY_SIZE(dm355evm_keys))
- return -EINVAL;
-
- return dm355evm_keys[index].keycode;
+ return IRQ_HANDLED;
}
/*----------------------------------------------------------------------*/
@@ -213,7 +176,6 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
struct dm355evm_keys *keys;
struct input_dev *input;
int status;
- int i;
/* allocate instance struct and input dev */
keys = kzalloc(sizeof *keys, GFP_KERNEL);
@@ -242,31 +204,30 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
input->id.product = 0x0355;
input->id.version = dm355evm_msp_read(DM355EVM_MSP_FIRMREV);
- input->evbit[0] = BIT(EV_KEY);
- for (i = 0; i < ARRAY_SIZE(dm355evm_keys); i++)
- __set_bit(dm355evm_keys[i].keycode, input->keybit);
-
- input->setkeycode = dm355evm_setkeycode;
- input->getkeycode = dm355evm_getkeycode;
+ status = sparse_keymap_setup(input, dm355evm_keys, NULL);
+ if (status)
+ goto fail1;
/* REVISIT: flush the event queue? */
status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
if (status < 0)
- goto fail1;
+ goto fail2;
/* register */
status = input_register_device(input);
if (status < 0)
- goto fail2;
+ goto fail3;
platform_set_drvdata(pdev, keys);
return 0;
-fail2:
+fail3:
free_irq(keys->irq, keys);
+fail2:
+ sparse_keymap_free(input);
fail1:
input_free_device(input);
kfree(keys);
@@ -280,6 +241,7 @@ static int __devexit dm355evm_keys_remove(struct platform_device *pdev)
struct dm355evm_keys *keys = platform_get_drvdata(pdev);
free_irq(keys->irq, keys);
+ sparse_keymap_free(keys->input);
input_unregister_device(keys->input);
kfree(keys);
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
