Re: [RFC][PATCH 1/4] PCI PM: Add function for checking PME status of devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Friday 09 October 2009, Bjorn Helgaas wrote:
> On Thursday 08 October 2009 04:52:48 pm Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rjw@xxxxxxx>
> > 
> > Add function pci_check_pme_status() that will check the PME status
> > bit of given device and clear it along with the PME enable bit.  It
> > will be necessary for PCI run-time power management.
> > 
> > Based on a patch from Shaohua Li <shaohua.li@xxxxxxxxx>
> > 
> > Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
> > ---
> >  drivers/pci/pci.c |   35 +++++++++++++++++++++++++++++++++++
> >  drivers/pci/pci.h |    1 +
> >  2 files changed, 36 insertions(+)
> > 
> > Index: linux-2.6/drivers/pci/pci.h
> > ===================================================================
> > --- linux-2.6.orig/drivers/pci/pci.h
> > +++ linux-2.6/drivers/pci/pci.h
> > @@ -49,6 +49,7 @@ struct pci_platform_pm_ops {
> >  extern int pci_set_platform_pm(struct pci_platform_pm_ops *ops);
> >  extern void pci_update_current_state(struct pci_dev *dev, pci_power_t state);
> >  extern void pci_disable_enabled_device(struct pci_dev *dev);
> > +extern bool pci_check_pme_status(struct pci_dev *dev);
> >  extern void pci_pm_init(struct pci_dev *dev);
> >  extern void platform_pci_wakeup_init(struct pci_dev *dev);
> >  extern void pci_allocate_cap_save_buffers(struct pci_dev *dev);
> > Index: linux-2.6/drivers/pci/pci.c
> > ===================================================================
> > --- linux-2.6.orig/drivers/pci/pci.c
> > +++ linux-2.6/drivers/pci/pci.c
> > @@ -1167,6 +1167,41 @@ int pci_set_pcie_reset_state(struct pci_
> >  }
> >  
> >  /**
> > + * pci_check_pme_status - Check if given device has generated PME.
> > + * @dev: Device to check.
> > + *
> > + * Check the PME status of the device, clear PME status and PME enable.  Return
> > + * 'true' if PME has been generated by the device (and hasn't been spurious) or
> > + * 'false' otherwise.
> 
> This comment confuses me because it implies that we always clear PME enable,
> but that's not what the code does.  If PME_STATUS is not asserted, the code
> doesn't write anything.

Well, that's a shortcut, perhaps going too far.  It should say "clear PME
status and PME enable, if the PME status was set".  Will fix.

> > + */
> > +bool pci_check_pme_status(struct pci_dev *dev)
> > +{
> > +	int pmcsr_pos;
> > +	u16 pmcsr;
> > +	bool ret = false;
> > +
> > +	if (!dev->pm_cap)
> > +		return false;
> > +
> > +	pmcsr_pos = dev->pm_cap + PCI_PM_CTRL;
> > +	/* clear PME status and disable PME to avoid interrupt flood */
> > +	pci_read_config_word(dev, pmcsr_pos, &pmcsr);
> > +	if (!(pmcsr & PCI_PM_CTRL_PME_STATUS))
> > +		return false;
> > +
> > +	pmcsr |= PCI_PM_CTRL_PME_STATUS;
> > +	/* Ignore spurious PME or clear PME enable if it's not spurious. */
> > +	if (pmcsr & PCI_PM_CTRL_PME_ENABLE) {
> > +		pmcsr &= ~PCI_PM_CTRL_PME_ENABLE;
> > +		ret = true;
> > +	}
> > +
> > +	pci_write_config_word(dev, pmcsr_pos, pmcsr);
> 
> I can't tell whether the comment or the code is what was intended,

The code.  I'll fix the comment.

> but I think the following would be a clearer way to implement the
> comment:
> 
> 	pci_read_config_word(..., &pmcsr);
> 	pci_write_config_word(..., (pmcsr | STATUS) & ~ENABLE);
> 
> 	if ((pmcsr & ENABLE) && (pmcsr & STATUS))
> 		return true;
> 	return false;

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux