(cc: lm-sensors) > > Revert "ACPICA: Remove obsolete acpi_os_validate_address interface" > > > > This reverts commit f9ca058430333c9a24c5ca926aa445125f88df18. > > > > which caused a regression: > > > > http://bugzilla.kernel.org/show_bug.cgi?id=13620 > > > > This revert breaks it8720 hardware monitoring on my machine: > > ACPI: I/O resource it87 [0x295-0x296] conflicts with ACPI region ECRE [0x290-0x2af] > ACPI: Device needs an ACPI driver Thanks for the report, but I don't have a simple answer for you. The mechanism that is restored to 2.6.29 behaviour here is intended to address an extremely severe bug in Linux where native sensor drivers access the same registers as AML, causing fun things like change of temperature units and spurious critical thermal shutdowns. The commit that we reverted here was an oversight in 2.6.30, and so the current plan is to revert that commit in 2.6.30.stable too. The mechanism prevents the sensor driver from loading when such a potential conflict is detected. If you can attach the output of acpidump from your machine to a new bugzilla entry, we can verify that the mechanism is indeed not mistaken on your box. thanks, Len Brown, Intel Open Source Technology Center > Reverting the revert solves the problem: > > markus@phenom2 ~ % sensors > it8720-isa-0290 > Adapter: ISA adapter > in0: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM > in1: +1.65 V (min = +0.00 V, max = +4.08 V) > in2: +1.14 V (min = +0.00 V, max = +4.08 V) > in3: +3.09 V (min = +0.00 V, max = +4.08 V) > in4: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM > in5: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM > in6: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM > in7: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM > in8: +3.41 V > fan1: 1175 RPM (min = 0 RPM) > fan2: 1175 RPM (min = 0 RPM) > fan3: 859 RPM (min = 0 RPM) > temp1: +37.0°C (low = -1.0°C, high = +127.0°C) sensor = thermistor > temp2: +41.0°C (low = -1.0°C, high = +127.0°C) sensor = thermistor > temp3: -128.0°C (low = -1.0°C, high = +127.0°C) sensor = disabled > cpu0_vid: +1.550 V > > k10temp-pci-00c3 > Adapter: PCI adapter > temp1: +37.8°C > > dmesg and .config is attached. > > -- > Markus >
