Looks like acpi woes to me. The acpi guys might prefer that you open a bugzilla.kernel.org report for this. Begin forwarded message: Date: Thu, 30 Jul 2009 23:51:04 +0300 (EEST) From: Meelis Roos <mroos@xxxxxxxx> To: Linux Kernel list <linux-kernel@xxxxxxxxxxxxxxx> Subject: Thinkpad X20 docking troubles - irq routing, USB strangeness Hello, I'm trying to use Thinkpad X20 with Thinkpad Dock (as described in http://www.thinkwiki.org/wiki/ThinkPad_Dock quite well). Docking and undocking basically works but there are different troubles. The first is irq-related. As soon as yenta driver discovers the additional ports, screaming irq happens and this shared irq is disabled. This documented in the dmesg below. This is my main problem, others may be secondary to it (at least the usb one). Another problem is that PCI devices do not go away after undock - they stay around in kernel's thinking. The third is related to USb and is quite mysterious to me. First it's simple - when docked, kernel spams dmesg with hub 1-1:1.0: unable to enumerate USB device on port 1 and dock USB ports do not work. lsusb displays this: Bus 001 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 8 idVendor 0x0451 Texas Instruments, Inc. idProduct 0x2036 TUSB2036 Hub bcdDevice 1.01 iManufacturer 0 iProduct 1 General Purpose USB Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 1 General Purpose USB Hub bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 1 General Purpose USB Hub Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x06 Hub Port Status: Port 1: 0001.0101 C_CONNECT power connect Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.31-rc4-00350-g658874f uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:07.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled However, after undock and dock, 4-port Atmel USB hub is discovered and it works, and no spamming happens any more. Bus 001 Device 038: ID 03eb:3312 Atmel Corp. 4-Port Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 8 idVendor 0x03eb Atmel Corp. idProduct 0x3312 4-Port Hub bcdDevice 3.00 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 64mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 64 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x1e Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 001 Device 037: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 8 idVendor 0x0451 Texas Instruments, Inc. idProduct 0x2036 TUSB2036 Hub bcdDevice 1.01 iManufacturer 0 iProduct 1 General Purpose USB Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 1 General Purpose USB Hub bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 1 General Purpose USB Hub Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x06 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.31-rc4-00350-g658874f uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:07.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled /proc/interrupts: CPU0 0: 184539 XT-PIC-XT timer 1: 8322 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 3: 5 XT-PIC-XT 4: 7 XT-PIC-XT 5: 6 XT-PIC-XT 7: 1 XT-PIC-XT parport0 8: 2 XT-PIC-XT rtc0 9: 25796 XT-PIC-XT acpi, yenta, yenta, eth0 10: 6 XT-PIC-XT 11: 202345 XT-PIC-XT ohci1394, uhci_hcd:usb1, pata_cmd64x, yenta, yenta, CS4281 12: 14174 XT-PIC-XT i8042 14: 15444 XT-PIC-XT ata_piix 15: 0 XT-PIC-XT ata_piix NMI: 0 Non-maskable interrupts ERR: 0 Linux version 2.6.31-rc4-00350-g658874f (mroos@tulp) (gcc version 4.3.3 (Debian 4.3.3-15) ) #1 Thu Jul 30 18:47:07 EEST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dd000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable) BIOS-e820: 0000000013ff0000 - 0000000013ffec00 (ACPI data) BIOS-e820: 0000000013ffec00 - 0000000014000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0x13ff0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FF0000000 write-back 1 base 010000000 mask FFC000000 write-back 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-0000000013ff0000 0000000000 - 0000400000 page 4k 0000400000 - 0013c00000 page 2M 0013c00000 - 0013ff0000 page 4k kernel direct mapping tables up to 13ff0000 @ 7000-c000 RAMDISK: 13bdc000 - 13fdff44 ACPI: RSDP 000f6ec0 00014 (v00 PTLTD ) ACPI: RSDT 13ff5c49 0002C (v01 PTLTD RSDT 06040000 LTP 00000000) ACPI: FACP 13ffeb65 00074 (v01 IBM TP-X21 06040000 00000000) ACPI: DSDT 13ff5c75 08EF0 (v01 IBM TP-X21 06040000 MSFT 0100000C) ACPI: FACS 13fff000 00040 ACPI: BOOT 13ffebd9 00027 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) 319MB LOWMEM available. mapped low ram: 0 - 13ff0000 low ram: 0 - 13ff0000 node 0 low ram: 00000000 - 13ff0000 node 0 bootmap 00001000 - 00003800 (7 early reservations) ==> bootmem [0000000000 - 0013ff0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00013beee8] TEXT DATA BSS ==> [0001000000 - 00013beee8] #2 [0013bdc000 - 0013fdff44] RAMDISK ==> [0013bdc000 - 0013fdff44] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #4 [00013bf000 - 00013c50d9] BRK ==> [00013bf000 - 00013c50d9] #5 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #6 [0000001000 - 0000004000] BOOTMAP ==> [0000001000 - 0000004000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x00013ff0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x00013ff0 On node 0 totalpages: 81807 free_area_init_node: node 0, pgdat c132b8e0, node_mem_map c13c6000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 608 pages used for memmap Normal zone: 77200 pages, LIFO batch:15 ACPI: PM-Timer IO Port: 0x1008 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dd000 PM: Registered nosave memory: 00000000000dd000 - 0000000000100000 Allocating PCI resources starting at 14000000 (gap: 14000000:ebf80000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 81167 Kernel command line: root=/dev/sda1 ro resume=/dev/sda2 PID hash table entries: 2048 (order: 11, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Memory: 316004k/327616k available (2427k kernel code, 10956k reserved, 858k data, 288k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) vmalloc : 0xd47f0000 - 0xfffe3000 ( 695 MB) lowmem : 0xc0000000 - 0xd3ff0000 ( 319 MB) .init : 0xc1337000 - 0xc137f000 ( 288 kB) .data : 0xc125ed4e - 0xc1335588 ( 858 kB) .text : 0xc1000000 - 0xc125ed4e (2427 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. NR_IRQS:16 CPU 0 irqstacks, hard=c132e000 soft=c132f000 Fast TSC calibration using PIT Detected 597.365 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Calibrating delay loop (skipped), value calculated using timer frequency.. 1194.73 BogoMIPS (lpj=5973650) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: Intel Pentium III (Coppermine) stepping 03 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ACPI: setting ELCR to 0200 (from 0e20) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PSIO] (on) ACPI: Power Resource [PSER] (off) ACPI: ACPI Dock Station Driver: 2 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:00:04.0: supports D1 D2 pci 0000:00:07.1: reg 20 io port: [0x1800-0x180f] pci 0000:00:07.2: reg 20 io port: [0x1820-0x183f] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f pci 0000:00:08.0: reg 10 32bit mmio: [0x50000000-0x50000fff] pci 0000:00:08.0: supports D1 D2 pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:08.1: reg 10 32bit mmio: [0x50100000-0x50100fff] pci 0000:00:08.1: supports D1 D2 pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:08.1: PME# disabled pci 0000:00:0a.0: reg 10 32bit mmio: [0xf4010000-0xf4010fff] pci 0000:00:0a.0: reg 14 io port: [0x1840-0x187f] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf4020000-0xf403ffff] pci 0000:00:0a.0: reg 30 32bit mmio: [0x000000-0x0fffff] pci 0000:00:0a.0: supports D1 D2 pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:0a.1: reg 10 io port: [0x1810-0x1817] pci 0000:00:0a.1: reg 14 32bit mmio: [0xf4011000-0xf4011fff] pci 0000:00:0a.1: supports D1 D2 pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:0a.1: PME# disabled pci 0000:00:0b.0: reg 10 32bit mmio: [0xf4012000-0xf4012fff] pci 0000:00:0b.0: reg 14 32bit mmio: [0xf4000000-0xf400ffff] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:0b.0: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff] pci 0000:01:00.0: reg 18 32bit mmio: [0xf4100000-0xf4100fff] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xf4100000-0xf5ffffff] pci 0000:02:00.0: reg 10 32bit mmio: [0xf6000000-0xf60007ff] pci 0000:02:00.0: reg 14 io port: [0x3000-0x307f] pci 0000:02:00.0: supports D2 pci 0000:02:00.0: PME# supported from D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:02:01.0: reg 10 io port: [0x30a0-0x30a7] pci 0000:02:01.0: reg 14 io port: [0x3094-0x3097] pci 0000:02:01.0: reg 18 io port: [0x3098-0x309f] pci 0000:02:01.0: reg 1c io port: [0x3090-0x3093] pci 0000:02:01.0: reg 20 io port: [0x3080-0x308f] pci 0000:02:01.0: supports D1 D2 pci 0000:02:02.0: reg 10 32bit mmio: [0x52000000-0x52000fff] pci 0000:02:02.0: supports D1 D2 pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:02.0: PME# disabled pci 0000:02:02.1: reg 10 32bit mmio: [0x53000000-0x53000fff] pci 0000:02:02.1: supports D1 D2 pci 0000:02:02.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:02.1: PME# disabled pci 0000:00:04.0: transparent bridge pci 0000:00:04.0: bridge io port: [0x00-0xfff] pci 0000:00:04.0: bridge 32bit mmio: [0x000000-0x0fffff] pci 0000:00:04.0: bridge 32bit mmio pref: [0x000000-0x0fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 9 11) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs *9 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 9 11) *5 PCI: Using ACPI for IRQ routing pci 0000:00:04.0: BAR 7: can't allocate resource pci 0000:00:04.0: BAR 8: can't allocate resource pci 0000:00:04.0: BAR 9: can't allocate resource pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xd0000-0xcffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xd8000-0xdbfff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xdc000-0xdffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:0a.0 BAR 6 (0x0-0xfffff), disabling pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x100000-0x13ffffff could not be reserved system 00:00: iomem range 0xfff80000-0xffffffff has been reserved system 00:02: ioport range 0x1000-0x103f has been reserved system 00:02: ioport range 0x1040-0x104f has been reserved system 00:02: ioport range 0xfe00-0xfe0f has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xf4100000-0xf5ffffff pci 0000:00:01.0: PREFETCH window: 0x34000000-0x340fffff pci 0000:02:02.0: CardBus bridge, secondary bus 0000:03 pci 0000:02:02.0: IO window: 0x004000-0x0040ff pci 0000:02:02.0: IO window: 0x004400-0x0044ff pci 0000:02:02.0: PREFETCH window: 0x1c000000-0x1fffffff pci 0000:02:02.0: MEM window: 0x14000000-0x17ffffff pci 0000:02:02.1: CardBus bridge, secondary bus 0000:07 pci 0000:02:02.1: IO window: 0x004800-0x0048ff pci 0000:02:02.1: IO window: 0x004c00-0x004cff pci 0000:02:02.1: PREFETCH window: 0x20000000-0x23ffffff pci 0000:02:02.1: MEM window: 0x18000000-0x1bffffff pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 pci 0000:00:04.0: IO window: 0x4000-0x4fff pci 0000:00:04.0: MEM window: 0x14000000-0x1bffffff pci 0000:00:04.0: PREFETCH window: 0x1c000000-0x23ffffff pci 0000:00:08.0: CardBus bridge, secondary bus 0000:09 pci 0000:00:08.0: IO window: 0x001400-0x0014ff pci 0000:00:08.0: IO window: 0x001c00-0x001cff pci 0000:00:08.0: PREFETCH window: 0x24000000-0x27ffffff pci 0000:00:08.0: MEM window: 0x28000000-0x2bffffff pci 0000:00:08.1: CardBus bridge, secondary bus 0000:0d pci 0000:00:08.1: IO window: 0x003400-0x0034ff pci 0000:00:08.1: IO window: 0x003800-0x0038ff pci 0000:00:08.1: PREFETCH window: 0x2c000000-0x2fffffff pci 0000:00:08.1: MEM window: 0x30000000-0x33ffffff ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered pci 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 pci 0000:02:02.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 pci 0000:00:08.0: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered pci 0000:00:08.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 pci 0000:00:08.1: power state changed by ACPI to D0 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 pci 0000:00:08.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xf4100000-0xf5ffffff] pci_bus 0000:01: resource 2 pref mem [0x34000000-0x340fffff] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] pci_bus 0000:02: resource 1 mem: [0x14000000-0x1bffffff] pci_bus 0000:02: resource 2 pref mem [0x1c000000-0x23ffffff] pci_bus 0000:02: resource 3 io: [0x00-0xffff] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] pci_bus 0000:03: resource 2 pref mem [0x1c000000-0x1fffffff] pci_bus 0000:03: resource 3 mem: [0x14000000-0x17ffffff] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff] pci_bus 0000:07: resource 2 pref mem [0x20000000-0x23ffffff] pci_bus 0000:07: resource 3 mem: [0x18000000-0x1bffffff] pci_bus 0000:09: resource 0 io: [0x1400-0x14ff] pci_bus 0000:09: resource 1 io: [0x1c00-0x1cff] pci_bus 0000:09: resource 2 pref mem [0x24000000-0x27ffffff] pci_bus 0000:09: resource 3 mem: [0x28000000-0x2bffffff] pci_bus 0000:0d: resource 0 io: [0x3400-0x34ff] pci_bus 0000:0d: resource 1 io: [0x3800-0x38ff] pci_bus 0000:0d: resource 2 pref mem [0x2c000000-0x2fffffff] pci_bus 0000:0d: resource 3 mem: [0x30000000-0x33ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Freeing initrd memory: 4111k freed Switched to high resolution mode on CPU 0 Simple Boot Flag at 0x35 set to 0x1 HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 625 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:00.0: Limiting direct PCI/PCI transfers pci 0000:01:00.0: Boot video device Non-volatile memory driver v1.3 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Platform driver 'serial8250' needs updating - please use dev_pm_ops serial 00:0b: activated 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:0a.1: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9 e100 0000:00:0a.0: PME# disabled e100: eth0: e100_probe: addr 0xf4010000, irq 9, MAC addr 00:90:27:96:b1:d0 console [netcon0] enabled netconsole: network logging started PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 Platform driver 'i8042' needs updating - please use dev_pm_ops serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Platform driver 'thinkpad_acpi' needs updating - please use dev_pm_ops thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS IZET9BWW (2.23 ), EC unknown input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 Registered led device: tpacpi::thinklight thinkpad_acpi: acpi_bus_get_device(bay) failed: -19 thinkpad_acpi: disabling subdriver bay Registered led device: tpacpi::power Registered led device: tpacpi::standby input: ThinkPad Extra Buttons as /devices/virtual/input/input1 TCP cubic registered NET: Registered protocol family 17 Freeing unused kernel memory: 288k freed Write protecting the kernel text: 2428k Write protecting the kernel read-only data: 684k thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (67 C) Platform driver 'floppy' needs updating - please use dev_pm_ops Floppy drive(s): fd0 is 1.44M Linux agpgart interface v0.103 SCSI subsystem initialized agpgart-intel 0000:00:00.0: Intel 440BX Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 ohci1394 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[f6000000-f60007ff] Max Packet=[2048] IR/IT contexts=[4/8] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00001820 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31-rc4-00350-g658874f uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected libata version 3.00 loaded. pata_cmd64x 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 scsi0 : pata_cmd64x scsi1 : pata_cmd64x ata1: PATA max UDMA/66 cmd 0x30a0 ctl 0x3094 bmdma 0x3080 irq 11 ata2: PATA max UDMA/66 cmd 0x3098 ctl 0x3090 bmdma 0x3088 irq 11 pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. ata_piix 0000:00:07.1: version 2.13 scsi2 : ata_piix scsi3 : ata_piix ata3: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1800 irq 14 ata4: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1808 irq 15 pata_cmd64x: active 10 recovery 10 setup 3. pata_cmd64x: active 10 recovery 10 setup 3. usb 1-1: new full speed USB device using uhci_hcd and address 2 ata3.00: ATA-5: IC25N020ATCS04-0, CA2OA71A, max UDMA/100 ata3.00: 39070080 sectors, multi 16: LBA ata3.00: configured for UDMA/33 scsi 2:0:0:0: Direct-Access ATA IC25N020ATCS04-0 CA2O PQ: 0 ANSI: 5 sd 2:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 usb 1-1: New USB device found, idVendor=0451, idProduct=2036 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: General Purpose USB Hub usb 1-1: configuration #1 chosen from 1 choice sd 2:0:0:0: [sda] Attached SCSI disk hub 1-1:1.0: USB hub found hub 1-1:1.0: 2 ports detected hub 1-1:1.0: unable to enumerate USB device on port 1 hub 1-1:1.0: unable to enumerate USB device on port 1 ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011060000004434] hub 1-1:1.0: unable to enumerate USB device on port 1 floppy0: no floppy controllers found Platform driver 'floppy' needs updating - please use dev_pm_ops Floppy drive(s): fd0 is 1.44M hub 1-1:1.0: unable to enumerate USB device on port 1 floppy0: no floppy controllers found PM: Starting manual resume from disk hub 1-1:1.0: unable to enumerate USB device on port 1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with writeback data mode. hub 1-1:1.0: unable to enumerate USB device on port 1 udev: starting version 141 hub 1-1:1.0: unable to enumerate USB device on port 1 Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SLPB] ACPI: AC Adapter [AC] (on-line) Platform driver 'floppy' needs updating - please use dev_pm_ops Floppy drive(s): fd0 is 1.44M hub 1-1:1.0: unable to enumerate USB device on port 1 parport_pc 00:0c: activated parport_pc 00:0c: reported by Plug and Play ACPI parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] ACPI: Battery Slot [BAT0] (battery present) rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram yenta_cardbus 0000:00:08.0: CardBus bridge found [1014:0185] usb 1-1.1: new full speed USB device using uhci_hcd and address 94 hub 1-1:1.0: unable to enumerate USB device on port 1 yenta_cardbus 0000:00:08.0: ISA IRQ mask 0x0438, PCI irq 11 yenta_cardbus 0000:00:08.0: Socket status: 30000006 yenta_cardbus 0000:00:08.1: CardBus bridge found [1014:0185] yenta_cardbus 0000:00:08.1: ISA IRQ mask 0x0438, PCI irq 11 yenta_cardbus 0000:00:08.1: Socket status: 30000006 yenta_cardbus 0000:02:02.0: CardBus bridge found [1014:0148] yenta_cardbus 0000:02:02.0: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:02.0: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:02.0: TI: mfunc 0x00001002, devctl 0x66 irq 11: nobody cared (try booting with the "irqpoll" option) Pid: 924, comm: modprobe Not tainted 2.6.31-rc4-00350-g658874f #1 Call Trace: [<c125bfe3>] ? printk+0x23/0x40 [<c1051fe3>] __report_bad_irq+0x33/0xb0 [<c10521cd>] note_interrupt+0x16d/0x1b0 [<c1052a3b>] handle_level_irq+0xab/0xe0 [<c1005287>] handle_irq+0x97/0xb0 [<c1004e15>] do_IRQ+0x45/0xb0 [<c1041284>] ? tick_program_event+0x24/0x40 [<c1052990>] ? handle_level_irq+0x0/0xe0 [<c10036f0>] common_interrupt+0x30/0x38 [<c1052990>] ? handle_level_irq+0x0/0xe0 [<c1050ee2>] ? handle_IRQ_event+0x22/0x100 [<c1052990>] ? handle_level_irq+0x0/0xe0 [<c10529ec>] handle_level_irq+0x5c/0xe0 <IRQ> [<c1004e15>] ? do_IRQ+0x45/0xb0 [<c10036f0>] ? common_interrupt+0x30/0x38 [<d4b5858d>] ? yenta_probe_cb_irq+0xbd/0x150 [yenta_socket] [<d4b58920>] ? ti12xx_override+0x300/0x820 [yenta_socket] [<d4b59419>] ? yenta_probe+0x349/0x76a [yenta_socket] [<c1097dde>] ? iput+0x2e/0x80 [<c10dab64>] ? sysfs_addrm_start+0x64/0xc0 [<c113033d>] ? local_pci_probe+0x1d/0x40 [<c1131368>] ? pci_device_probe+0x78/0xa0 [<c11a084c>] ? driver_probe_device+0x8c/0x1a0 [<c1130305>] ? pci_match_device+0xa5/0xc0 [<c11a09f9>] ? __driver_attach+0x99/0xa0 [<c11a0960>] ? __driver_attach+0x0/0xa0 [<c119ffb2>] ? bus_for_each_dev+0x62/0xa0 [<c11a0694>] ? driver_attach+0x24/0x40 [<c11a0960>] ? __driver_attach+0x0/0xa0 [<c119f73a>] ? bus_add_driver+0xba/0x260 [<c1130360>] ? pci_device_shutdown+0x0/0x50 [<c1131250>] ? pci_device_remove+0x0/0x60 [<c11a0d73>] ? driver_register+0x83/0x170 [<d4b5f000>] ? yenta_socket_init+0x0/0x3d [yenta_socket] [<c1131722>] ? __pci_register_driver+0x42/0xc0 [<d4b5f000>] ? yenta_socket_init+0x0/0x3d [yenta_socket] [<d4b5f025>] ? yenta_socket_init+0x25/0x3d [yenta_socket] [<c1001125>] ? do_one_initcall+0x35/0x170 [<c1039ac5>] ? blocking_notifier_call_chain+0x25/0x40 [<c104a3dd>] ? sys_init_module+0xdd/0x220 [<c1013239>] ? do_page_fault+0x179/0x270 [<c10030af>] ? sysenter_do_call+0x12/0x26 handlers: [<d4824930>] (ohci_irq_handler+0x0/0x8b0 [ohci1394]) [<d4906a60>] (usb_hcd_irq+0x0/0x80 [usbcore]) [<d49a71b0>] (ata_sff_interrupt+0x0/0xf0 [libata]) [<d4b58f40>] (yenta_interrupt+0x0/0x100 [yenta_socket]) [<d4b58f40>] (yenta_interrupt+0x0/0x100 [yenta_socket]) Disabling IRQ #11 hub 1-1:1.0: unable to enumerate USB device on port 1 hub 1-1:1.0: unable to enumerate USB device on port 1 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5 Platform driver 'pcspkr' needs updating - please use dev_pm_ops input: PC Speaker as /devices/platform/pcspkr/input/input6 CS4281 0000:00:0b.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 yenta_cardbus 0000:02:02.0: ISA IRQ mask 0x0438, PCI irq 9 yenta_cardbus 0000:02:02.0: Socket status: 30000006 yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0x14000000 - 0x1bffffff yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge Memory window: 0x1c000000 - 0x23ffffff yenta_cardbus 0000:02:02.1: CardBus bridge found [1014:0148] yenta_cardbus 0000:02:02.1: Using INTVAL to route CSC interrupts to PCI yenta_cardbus 0000:02:02.1: Routing CardBus interrupts to PCI yenta_cardbus 0000:02:02.1: TI: mfunc 0x00001002, devctl 0x66 irq 11: nobody cared (try booting with the "irqpoll" option) Pid: 924, comm: modprobe Not tainted 2.6.31-rc4-00350-g658874f #1 Call Trace: [<c125bfe3>] ? printk+0x23/0x40 [<c1051fe3>] __report_bad_irq+0x33/0xb0 [<c10521cd>] note_interrupt+0x16d/0x1b0 [<c1052a3b>] handle_level_irq+0xab/0xe0 [<c1005287>] handle_irq+0x97/0xb0 [<c1004e15>] do_IRQ+0x45/0xb0 [<c1041284>] ? tick_program_event+0x24/0x40 [<c1052990>] ? handle_level_irq+0x0/0xe0 [<c10036f0>] common_interrupt+0x30/0x38 [<c1052990>] ? handle_level_irq+0x0/0xe0 [<c1050ee2>] ? handle_IRQ_event+0x22/0x100 [<c1052990>] ? handle_level_irq+0x0/0xe0 [<c10529ec>] handle_level_irq+0x5c/0xe0 <IRQ> [<c1004e15>] ? do_IRQ+0x45/0xb0 [<c10036f0>] ? common_interrupt+0x30/0x38 [<d4b5858d>] ? yenta_probe_cb_irq+0xbd/0x150 [yenta_socket] [<d4b587fe>] ? ti12xx_override+0x1de/0x820 [yenta_socket] [<d4b59419>] ? yenta_probe+0x349/0x76a [yenta_socket] [<c1097dde>] ? iput+0x2e/0x80 [<c10dab64>] ? sysfs_addrm_start+0x64/0xc0 [<c113033d>] ? local_pci_probe+0x1d/0x40 [<c1131368>] ? pci_device_probe+0x78/0xa0 [<c11a084c>] ? driver_probe_device+0x8c/0x1a0 [<c1130305>] ? pci_match_device+0xa5/0xc0 [<c11a09f9>] ? __driver_attach+0x99/0xa0 [<c11a0960>] ? __driver_attach+0x0/0xa0 [<c119ffb2>] ? bus_for_each_dev+0x62/0xa0 [<c11a0694>] ? driver_attach+0x24/0x40 [<c11a0960>] ? __driver_attach+0x0/0xa0 [<c119f73a>] ? bus_add_driver+0xba/0x260 [<c1130360>] ? pci_device_shutdown+0x0/0x50 [<c1131250>] ? pci_device_remove+0x0/0x60 [<c11a0d73>] ? driver_register+0x83/0x170 [<d4b5f000>] ? yenta_socket_init+0x0/0x3d [yenta_socket] [<c1131722>] ? __pci_register_driver+0x42/0xc0 [<d4b5f000>] ? yenta_socket_init+0x0/0x3d [yenta_socket] [<d4b5f025>] ? yenta_socket_init+0x25/0x3d [yenta_socket] [<c1001125>] ? do_one_initcall+0x35/0x170 [<c1039ac5>] ? blocking_notifier_call_chain+0x25/0x40 [<c104a3dd>] ? sys_init_module+0xdd/0x220 [<c1013239>] ? do_page_fault+0x179/0x270 [<c10030af>] ? sysenter_do_call+0x12/0x26 handlers: [<d4824930>] (ohci_irq_handler+0x0/0x8b0 [ohci1394]) [<d4906a60>] (usb_hcd_irq+0x0/0x80 [usbcore]) [<d49a71b0>] (ata_sff_interrupt+0x0/0xf0 [libata]) [<d4b58f40>] (yenta_interrupt+0x0/0x100 [yenta_socket]) [<d4b58f40>] (yenta_interrupt+0x0/0x100 [yenta_socket]) [<d4d7f3c0>] (snd_cs4281_interrupt+0x0/0x1f0 [snd_cs4281]) Disabling IRQ #11 floppy0: no floppy controllers found Platform driver 'floppy' needs updating - please use dev_pm_ops Floppy drive(s): fd0 is 1.44M gameport: CS4281 Gameport is pci0000:00:0b.0/gameport0, speed 2386kHz hub 1-1:1.0: unable to enumerate USB device on port 1 yenta_cardbus 0000:02:02.1: ISA IRQ mask 0x0438, PCI irq 9 yenta_cardbus 0000:02:02.1: Socket status: 30000006 yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0x14000000 - 0x1bffffff yenta_cardbus 0000:02:02.1: pcmcia: parent PCI bridge Memory window: 0x1c000000 - 0x23ffffff Clocksource tsc unstable (delta = -117459214 ns) hub 1-1:1.0: unable to enumerate USB device on port 1 hub 1-1:1.0: unable to enumerate USB device on port 1 floppy0: no floppy controllers found hub 1-1:1.0: unable to enumerate USB device on port 1 hub 1-1:1.0: unable to enumerate USB device on port 1 Adding 680392k swap on /dev/sda2. Priority:-1 extents:1 across:680392k EXT3 FS on sda1, internal journal hub 1-1:1.0: unable to enumerate USB device on port 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions hub 1-1:1.0: unable to enumerate USB device on port 1 e100 0000:00:0a.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready hub 1-1:1.0: unable to enumerate USB device on port 1 e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready hub 1-1:1.0: unable to enumerate USB device on port 1 thinkpad_acpi: requested hot key mask 0x000000ff, forced to 0x00000000 (NVRAM poll mask is 0x00fb8000): no firmware mask support input: /usr/sbin/thinkpad-keys as /devices/virtual/input/input7 hub 1-1:1.0: unable to enumerate USB device on port 1 hub 1-1:1.0: unable to enumerate USB device on port 1 e100 0000:00:0a.0: firmware: using built-in firmware e100/d101s_ucode.bin ADDRCONF(NETDEV_UP): eth0: link is not ready hub 1-1:1.0: unable to enumerate USB device on port 1 e100: eth0 NIC Link is Up 100 Mbps Full Duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready hub 1-1:1.0: unable to enumerate USB device on port 1 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized hub 1-1:1.0: unable to enumerate USB device on port 1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered hub 1-1:1.0: unable to enumerate USB device on port 1 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized hub 1-1:1.0: unable to enumerate USB device on port 1 lp0: using parport0 (interrupt-driven). hub 1-1:1.0: unable to enumerate USB device on port 1 eth0: no IPv6 routers present hub 1-1:1.0: unable to enumerate USB device on port 1 -- Meelis Roos (mroos@xxxxxxxx) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
