On Fri, 2009-07-17 at 00:30 +0800, Jesse Barnes wrote:
> On Thu, 16 Jul 2009 09:36:13 +0800
> ykzhao <yakui.zhao@xxxxxxxxx> wrote:
>
> > On Thu, 2009-07-16 at 06:11 +0800, Jesse Barnes wrote:
> > > Some laptop platforms will disable pipes and/or planes at lid close
> > > time and not restore them when the lid is opened again. So catch
> > > the lid event, and if the lid was opened, force a mode restore.
> > Why is it necessary to force a mode restore when the LID is reopened?
> > Do you mean that the pipes/planes are disabled automatically by BIOS
> > when the LID is closed?
>
> Yes, maybe I need to make that clearer in the changelog.
>
> > If so, maybe it will be better that this feature is limited to some
> > boxes. It is unnecessary to add this feature for all the laptops.
>
> The downside of doing that is that we'll always be playing catch up,
> adding quirks for machines as problems are discovered, as opposed to
> everything "just working" out of the box. A whitelist might be better,
> but really forcing a mode set at open isn't expensive, and with some
> care in our mode setting routines, need not flicker at all.
thanks for the detailed explanation.
I understand it.
>
> > Is it enough to mark the LVDS as disconnected/connected according to
> > the LID status? And this is done by user-space tool.
>
> Not sure what you mean here...
What I said is that we can send the hotplug event to user space. And
then the user space tool can set the mode for LVDS.
Of course the LVDS status is marked as disconnected/connected in
course of LVDS detection.
>
> > > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> > > index 39b393d..5873865 100644
> > > --- a/drivers/gpu/drm/Kconfig
> > > +++ b/drivers/gpu/drm/Kconfig
> > > @@ -86,6 +86,7 @@ config DRM_I915
> > > select FB_CFB_COPYAREA
> > > select FB_CFB_IMAGEBLIT
> > > select FB
> > > + select ACPI_BUTTON
> > How about
> > + select ACPI_BUTTON if ACPI
>
> Yeah I saw your other comments too about non-ACPI configs. I have a
> hard time caring about them though; so much depends on ACPI these days
> that disabling it is just a bad idea. But I guess it's not too much
> trouble to make this work w/o.
If someone disable the CONFIG_ACPI in kernel configuration, maybe it
will fail in the kernel compilation.
Sometimes the box will be booted with ACPI disabled. In such case the
LID device is not initialized. When we call the function of
acpi_lid_open, we will access the uninitialized variable. It will be
incorrect.
In fact it will be very easy to add this check.
Thanks.
>
> Thanks,
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
