Zhang Rui wrote:
On Tue, 2009-06-23 at 16:45 +0800, Sebastian Pohl wrote:
Zhang Rui wrote:
On Tue, 2009-06-23 at 16:30 +0800, Sebastian Pohl wrote:
Hi!
Zhang Rui wrote:
On Wed, 2009-06-17 at 21:43 +0800, Sebastian Pohl wrote:
Hello everyone!
Thank you to everyone working on the sony stuff! It made my laptop a
much more valuable companion!
But there are still some flaws that are left. I am writing to get an
advise what to do with them.
Ok, the problems are:
- The special button s2 generates the same acpi event as the stamina switch
- The lidswitch does not generate any acpi events
- The Power does not generate any acpi events
please kill acpid, and run "cat /proc/acpi/event", what do you get when
pressing each of the three buttons?
Both, the s2 Button and the stamina switch generate the following
so Q1 and Q2 are sony platform driver problems.
what do you get when pressing the power button?
thanks,
rui
When presing the power button nothing happens. No acpi output, no
interrupts, nothing. Same with the lid-switch.
even no ACPI interrupts?
please attach the output of grep . /sys/firmware/acpi/interrupts/*
both before and after pressing these buttons for a couple of times.
thanks,
rui
Hi,
this is before:
/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled
/sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid
/sys/firmware/acpi/interrupts/ff_rt_clk: 0 disabled
/sys/firmware/acpi/interrupts/ff_slp_btn: 0 invalid
/sys/firmware/acpi/interrupts/gpe00: 0 invalid
/sys/firmware/acpi/interrupts/gpe01: 0 enabled
/sys/firmware/acpi/interrupts/gpe02: 0 enabled
/sys/firmware/acpi/interrupts/gpe03: 0 disabled
/sys/firmware/acpi/interrupts/gpe04: 0 disabled
/sys/firmware/acpi/interrupts/gpe05: 0 disabled
/sys/firmware/acpi/interrupts/gpe06: 0 enabled
/sys/firmware/acpi/interrupts/gpe07: 0 enabled
/sys/firmware/acpi/interrupts/gpe08: 0 invalid
/sys/firmware/acpi/interrupts/gpe09: 0 disabled
/sys/firmware/acpi/interrupts/gpe0A: 0 invalid
/sys/firmware/acpi/interrupts/gpe0B: 0 enabled
/sys/firmware/acpi/interrupts/gpe0C: 0 disabled
/sys/firmware/acpi/interrupts/gpe0D: 0 disabled
/sys/firmware/acpi/interrupts/gpe0E: 0 disabled
/sys/firmware/acpi/interrupts/gpe0F: 0 invalid
/sys/firmware/acpi/interrupts/gpe10: 0 invalid
/sys/firmware/acpi/interrupts/gpe11: 0 invalid
/sys/firmware/acpi/interrupts/gpe12: 0 invalid
/sys/firmware/acpi/interrupts/gpe13: 0 invalid
/sys/firmware/acpi/interrupts/gpe14: 0 invalid
/sys/firmware/acpi/interrupts/gpe15: 0 invalid
/sys/firmware/acpi/interrupts/gpe16: 0 invalid
/sys/firmware/acpi/interrupts/gpe17: 0 enabled
/sys/firmware/acpi/interrupts/gpe18: 0 enabled
/sys/firmware/acpi/interrupts/gpe19: 0 invalid
/sys/firmware/acpi/interrupts/gpe1A: 0 invalid
/sys/firmware/acpi/interrupts/gpe1B: 0 invalid
/sys/firmware/acpi/interrupts/gpe1C: 0 invalid
/sys/firmware/acpi/interrupts/gpe1D: 0 invalid
/sys/firmware/acpi/interrupts/gpe1E: 0 invalid
/sys/firmware/acpi/interrupts/gpe1F: 0 invalid
/sys/firmware/acpi/interrupts/gpe_all: 0
/sys/firmware/acpi/interrupts/sci: 0
and after 10 times pressing the power button and opening/closing the lid:
/sys/firmware/acpi/interrupts/error: 0
/sys/firmware/acpi/interrupts/ff_gbl_lock: 0 enabled
/sys/firmware/acpi/interrupts/ff_pmtimer: 0 invalid
/sys/firmware/acpi/interrupts/ff_pwr_btn: 0 invalid
/sys/firmware/acpi/interrupts/ff_rt_clk: 0 disabled
/sys/firmware/acpi/interrupts/ff_slp_btn: 0 invalid
/sys/firmware/acpi/interrupts/gpe00: 0 invalid
/sys/firmware/acpi/interrupts/gpe01: 0 enabled
/sys/firmware/acpi/interrupts/gpe02: 0 enabled
/sys/firmware/acpi/interrupts/gpe03: 0 disabled
/sys/firmware/acpi/interrupts/gpe04: 0 disabled
/sys/firmware/acpi/interrupts/gpe05: 0 disabled
/sys/firmware/acpi/interrupts/gpe06: 0 enabled
/sys/firmware/acpi/interrupts/gpe07: 0 enabled
/sys/firmware/acpi/interrupts/gpe08: 0 invalid
/sys/firmware/acpi/interrupts/gpe09: 0 disabled
/sys/firmware/acpi/interrupts/gpe0A: 0 invalid
/sys/firmware/acpi/interrupts/gpe0B: 0 enabled
/sys/firmware/acpi/interrupts/gpe0C: 0 disabled
/sys/firmware/acpi/interrupts/gpe0D: 0 disabled
/sys/firmware/acpi/interrupts/gpe0E: 0 disabled
/sys/firmware/acpi/interrupts/gpe0F: 0 invalid
/sys/firmware/acpi/interrupts/gpe10: 0 invalid
/sys/firmware/acpi/interrupts/gpe11: 0 invalid
/sys/firmware/acpi/interrupts/gpe12: 0 invalid
/sys/firmware/acpi/interrupts/gpe13: 0 invalid
/sys/firmware/acpi/interrupts/gpe14: 0 invalid
/sys/firmware/acpi/interrupts/gpe15: 0 invalid
/sys/firmware/acpi/interrupts/gpe16: 0 invalid
/sys/firmware/acpi/interrupts/gpe17: 0 enabled
/sys/firmware/acpi/interrupts/gpe18: 0 enabled
/sys/firmware/acpi/interrupts/gpe19: 0 invalid
/sys/firmware/acpi/interrupts/gpe1A: 0 invalid
/sys/firmware/acpi/interrupts/gpe1B: 0 invalid
/sys/firmware/acpi/interrupts/gpe1C: 0 invalid
/sys/firmware/acpi/interrupts/gpe1D: 0 invalid
/sys/firmware/acpi/interrupts/gpe1E: 0 invalid
/sys/firmware/acpi/interrupts/gpe1F: 0 invalid
/sys/firmware/acpi/interrupts/gpe_all: 0
/sys/firmware/acpi/interrupts/sci: 0
I cant see any difference...
regards
sebastian
regards
sebastian
sony/hotkey SPIC 00000001 00000021
run "cat /proc/interrupts" both before and after pressing these buttons,
does the number of ACPI or sony interrupts increase?
If ACPI interrupts increases, please run
"grep . /sys/firmware/acpi/interrupts/*" and tell us which GPE/Fixed
event is fired.
Only the stamina switch and the s2 button increase any interrupts but
only sony interrupts are generated.
Should i post them to bugtrackter or
something else?
please file a new bug report at
http://bugzilla.kernel.org/enter_bug.cgi?product=ACPI
and attach all the request info there.
please also attach the acpidump output.
thanks,
rui
thank you!
regards
sebastian
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
