Ingo Molnar wrote:
>
> That function has way too many parameters. Please introduce a helper
> structure (struct io_apic_irq_attr) where the parameters can be
> passed along in a clean and short fashion. We update them by
> reference anyway.
>
> I've applied the patch, but we need these cleanups too, the code has
> become too ugly.
>
please check
[PATCH] x86: introduce io_apic_irq_attr
according to Ingo, some io_apic related function get too more parameter
So reduce related funcs to get less param by passing io_apic_irq pointer
[ Impact: cleanup ]
Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
---
arch/x86/include/asm/hw_irq.h | 11 ++++++++--
arch/x86/include/asm/io_apic.h | 5 ++--
arch/x86/kernel/acpi/boot.c | 9 +++++---
arch/x86/kernel/apic/io_apic.c | 41 ++++++++++++++++++++++----------------
arch/x86/pci/irq.c | 15 +++----------
drivers/pci/hotplug/ibmphp_core.c | 7 +-----
6 files changed, 48 insertions(+), 40 deletions(-)
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -63,9 +63,16 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
+
+struct io_apic_irq_attr {
+ int ioapic;
+ int ioapic_pin;
+ int trigger;
+ int polarity;
+};
+
extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity);
+ struct io_apic_irq_attr *io_apic_irq);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/arch/x86/include/asm/io_apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/io_apic.h
+++ linux-2.6/arch/x86/include/asm/io_apic.h
@@ -156,8 +156,9 @@ extern int io_apic_get_version(int ioapi
extern int io_apic_get_redir_entries(int ioapic);
#endif /* CONFIG_ACPI */
-extern int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin,
- int irq, int edge_level, int active_high_low);
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *io_apic_irq);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -1198,6 +1198,7 @@ int mp_register_gsi(struct device *dev,
{
int ioapic;
int ioapic_pin;
+ struct io_apic_irq_attr io_apic_irq;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1227,9 +1228,11 @@ int mp_register_gsi(struct device *dev,
}
mp_config_acpi_gsi(dev, gsi, triggering, polarity);
- io_apic_set_pci_routing(dev, ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_irq.ioapic = ioapic;
+ io_apic_irq.ioapic_pin = ioapic_pin;
+ io_apic_irq.trigger = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
+ io_apic_irq.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &io_apic_irq);
return gsi;
}
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -1096,8 +1096,7 @@ static int pin_2_irq(int idx, int apic,
* Not an __init, possibly needed by modules
*/
int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
- int *ioapic, int *ioapic_pin,
- int *trigger, int *polarity)
+ struct io_apic_irq_attr *io_apic_irq)
{
int apic, i, best_guess = -1;
@@ -1127,10 +1126,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
continue;
if (pin == (mp_irqs[i].srcbusirq & 3)) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ io_apic_irq->ioapic = apic;
+ io_apic_irq->ioapic_pin = mp_irqs[i].dstirq;
+ io_apic_irq->trigger = irq_trigger(i);
+ io_apic_irq->polarity = irq_polarity(i);
return irq;
}
/*
@@ -1138,10 +1137,10 @@ int IO_APIC_get_PCI_irq_vector(int bus,
* best-guess fuzzy result for broken mptables.
*/
if (best_guess < 0) {
- *ioapic = apic;
- *ioapic_pin = mp_irqs[i].dstirq;
- *trigger = irq_trigger(i);
- *polarity = irq_polarity(i);
+ io_apic_irq->ioapic = apic;
+ io_apic_irq->ioapic_pin = mp_irqs[i].dstirq;
+ io_apic_irq->trigger = irq_trigger(i);
+ io_apic_irq->polarity = irq_polarity(i);
best_guess = irq;
}
}
@@ -3848,13 +3847,16 @@ int __init arch_probe_nr_irqs(void)
}
#endif
-static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *io_apic_irq)
{
struct irq_desc *desc;
struct irq_cfg *cfg;
int node;
+ int ioapic, pin;
+ int triggering, polarity;
+ ioapic = io_apic_irq->ioapic;
if (!IO_APIC_IRQ(irq)) {
apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
ioapic);
@@ -3872,6 +3874,10 @@ static int __io_apic_set_pci_routing(str
return 0;
}
+ pin = io_apic_irq->ioapic_pin;
+ triggering = io_apic_irq->trigger;
+ polarity = io_apic_irq->polarity;
+
/*
* IRQs < 16 are already in the irq_2_pin[] map
*/
@@ -3885,15 +3891,17 @@ static int __io_apic_set_pci_routing(str
return 0;
}
-int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq,
- int triggering, int polarity)
+int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *io_apic_irq)
{
-
+ int ioapic, pin;
/*
* Avoid pin reprogramming. PRTs typically include entries
* with redundant pin->gsi mappings (but unique PCI devices);
* we only program the IOAPIC on the first.
*/
+ ioapic = io_apic_irq->ioapic;
+ pin = io_apic_irq->ioapic_pin;
if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
pr_debug("Pin %d-%d already programmed\n",
mp_ioapics[ioapic].apicid, pin);
@@ -3901,8 +3909,7 @@ int io_apic_set_pci_routing(struct devic
}
set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
- return __io_apic_set_pci_routing(dev, ioapic, pin, irq,
- triggering, polarity);
+ return __io_apic_set_pci_routing(dev, irq, io_apic_irq);
}
/* --------------------------------------------------------------------------
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1200,14 +1200,11 @@ static int pirq_enable_irq(struct pci_de
#ifdef CONFIG_X86_IO_APIC
struct pci_dev *temp_dev;
int irq;
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr io_apic_irq;
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
PCI_SLOT(dev->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &io_apic_irq);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1221,9 +1218,7 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
PCI_SLOT(bridge->devfn),
- pin - 1,
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ pin - 1, &io_apic_irq);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
@@ -1233,9 +1228,7 @@ static int pirq_enable_irq(struct pci_de
}
dev = temp_dev;
if (irq >= 0) {
- io_apic_set_pci_routing(&dev->dev, ioapic,
- ioapic_pin, irq,
- triggering, polarity);
+ io_apic_set_pci_routing(&dev->dev, irq, &io_apic_irq);
dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -155,15 +155,12 @@ int ibmphp_init_devno(struct slot **cur_
for (loop = 0; loop < len; loop++) {
if ((*cur_slot)->number == rtable->slots[loop].slot &&
(*cur_slot)->bus == rtable->slots[loop].bus) {
- int ioapic = -1, ioapic_pin = -1;
- int triggering, polarity;
+ struct io_apic_irq_attr io_apic_irq;
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i.
- &ioapic, &ioapic_pin,
- &triggering, &polarity);
+ (int) (*cur_slot)->device, i, &io_apic_irq);
debug("(*cur_slot)->irq[0] = %x\n",
(*cur_slot)->irq[0]);
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
