I tried modproble apm, I inspected the apm model is loaded with lsmod, and a log message is written into syslog like kernel: [37401.296871] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) and also tried to pass the apm=power_off to kernel as boot option, [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet console=ttyS0,115200n8 apm=power_off both approaches don't work for me, unfortunately. On 4/13/09, Zhang Rui <rui.zhang@xxxxxxxxx> wrote: > On Mon, 2009-04-13 at 11:31 +0800, Ken Perl wrote: >> I have no idea if my board supports ACPI or not, what's the reason to >> try a older kernel? is it because older kernel supports older board? >> >> I can not power off machine with my current kernel by issue >> "power_off" command, the power is still on after I see the >> message"system halted". Is this related to ACPI? but I remember older >> kernel can power off my machine. >> > does boot option "apm=power-off" help? > > thanks, > rui > > >> On Mon, Apr 13, 2009 at 9:37 AM, yakui_zhao <yakui.zhao@xxxxxxxxx> wrote: >> > On Sun, 2009-04-12 at 19:19 +0800, Ken Perl wrote: >> >> I entered the bios but don't find a option to enable/disable ACPI. the >> >> dmesg output is below, >> > >> > >From the dmesg log it seems that there exists the following warning >> > message: >> > >ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321] >> > It indicates that no ACPI table is found on this box. In such case >> > the ACPI can't be initialized correctly. Of course the >> > FAN/Processor/Thermal driver can't be loaded correctly. >> > So IMO this is a BIOS bug rather than ACPI bug. >> > >> > Will you please try the previous kernel(for example: 2.6.23 ) and >> > attach the output of dmesg? >> > >> > Thanks. >> >> >> >> [ 0.000000] Initializing cgroup subsys cpuset >> >> [ 0.000000] Initializing cgroup subsys cpu >> >> [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) >> >> (dannf@xxxxxxxxxx) (gcc version 4.1.3 20080704 (prerelease) (Debian >> >> 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009 >> >> [ 0.000000] BIOS-provided physical RAM map: >> >> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >> >> [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 >> >> (reserved) >> >> [ 0.000000] BIOS-e820: 00000000000f0c00 - 0000000000100000 >> >> (reserved) >> >> [ 0.000000] BIOS-e820: 0000000000100000 - 0000000008000000 (usable) >> >> [ 0.000000] BIOS-e820: 00000000ffff0c00 - 0000000100000000 >> >> (reserved) >> >> [ 0.000000] 0MB HIGHMEM available. >> >> [ 0.000000] 128MB LOWMEM available. >> >> [ 0.000000] Entering add_active_range(0, 0, 32768) 0 entries of 256 >> >> used >> >> [ 0.000000] Zone PFN ranges: >> >> [ 0.000000] DMA 0 -> 4096 >> >> [ 0.000000] Normal 4096 -> 32768 >> >> [ 0.000000] HighMem 32768 -> 32768 >> >> [ 0.000000] Movable zone start PFN for each node >> >> [ 0.000000] early_node_map[1] active PFN ranges >> >> [ 0.000000] 0: 0 -> 32768 >> >> [ 0.000000] On node 0 totalpages: 32768 >> >> [ 0.000000] DMA zone: 32 pages used for memmap >> >> [ 0.000000] DMA zone: 0 pages reserved >> >> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 >> >> [ 0.000000] Normal zone: 224 pages used for memmap >> >> [ 0.000000] Normal zone: 28448 pages, LIFO batch:7 >> >> [ 0.000000] HighMem zone: 0 pages used for memmap >> >> [ 0.000000] Movable zone: 0 pages used for memmap >> >> [ 0.000000] DMI not present or invalid. >> >> [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found >> >> [20080321] >> >> [ 0.000000] Allocating PCI resources starting at 10000000 (gap: >> >> 08000000:f7ff0c00) >> >> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - >> >> 00000000000a0000 >> >> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - >> >> 00000000000f1000 >> >> [ 0.000000] PM: Registered nosave memory: 00000000000f1000 - >> >> 0000000000100000 >> >> [ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs >> >> [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data >> >> [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1 >> >> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >> >> Total pages: 32512 >> >> [ 0.000000] Kernel command line: root=/dev/hda1 ro quiet >> >> console=ttyS0,115200n8 >> >> [ 0.000000] Local APIC disabled by BIOS -- you can enable it with >> >> "lapic" >> >> [ 0.000000] mapped APIC to ffffb000 (0110c000) >> >> [ 0.000000] Enabling fast FPU save and restore... done. >> >> [ 0.000000] Initializing CPU#0 >> >> [ 0.000000] PID hash table entries: 512 (order: 9, 2048 bytes) >> >> [ 0.000000] Detected 267.283 MHz processor. >> >> [ 0.004000] Console: colour VGA+ 80x25 >> >> [ 0.004000] console [ttyS0] enabled >> >> [ 0.004000] Dentry cache hash table entries: 16384 (order: 4, 65536 >> >> bytes) >> >> [ 0.004000] Inode-cache hash table entries: 8192 (order: 3, 32768 >> >> bytes) >> >> [ 0.004000] Memory: 120060k/131072k available (1769k kernel code, >> >> 10456k reserved, 752k data, 244k init, 0k highmem) >> >> [ 0.004000] virtual kernel memory layout: >> >> [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) >> >> [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) >> >> [ 0.004000] vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB) >> >> [ 0.004000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) >> >> [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) >> >> [ 0.004000] .data : 0xc02ba4d3 - 0xc0376620 ( 752 kB) >> >> [ 0.004000] .text : 0xc0100000 - 0xc02ba4d3 (1769 kB) >> >> [ 0.004000] Checking if this processor honours the WP bit even in >> >> supervisor mode...Ok. >> >> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated >> >> [ 0.085108] Calibrating delay using timer specific routine.. 536.59 >> >> BogoMIPS (lpj=1073195) >> >> [ 0.085466] Security Framework initialized >> >> [ 0.085517] SELinux: Disabled at boot. >> >> [ 0.085550] Capability LSM initialized >> >> [ 0.085708] Mount-cache hash table entries: 512 >> >> [ 0.087018] Initializing cgroup subsys ns >> >> [ 0.087061] Initializing cgroup subsys cpuacct >> >> [ 0.087085] Initializing cgroup subsys devices >> >> [ 0.087292] CPU: L1 I cache: 16K, L1 D cache: 16K >> >> [ 0.087337] Intel machine check architecture supported. >> >> [ 0.087369] Intel machine check reporting enabled on CPU#0. >> >> [ 0.087471] Checking 'hlt' instruction... OK. >> >> [ 0.101247] SMP alternatives: switching to UP code >> >> [ 0.133922] Freeing SMP alternatives: 16k freed >> >> [ 0.133956] ACPI: Core revision 20080321 >> >> [ 0.134291] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While >> >> loading namespace from ACPI tables [20080321] >> >> [ 0.134339] ACPI: Unable to load the System Description Tables >> >> [ 0.140008] weird, boot CPU (#0) not listedby the BIOS. >> >> [ 0.140008] SMP motherboard not detected. >> >> [ 0.140008] Local APIC not detected. Using dummy APIC emulation. >> >> [ 0.140008] SMP disabled >> >> [ 0.140607] Brought up 1 CPUs >> >> [ 0.140637] Total of 1 processors activated (536.59 BogoMIPS). >> >> [ 0.140698] CPU0 attaching sched-domain: >> >> [ 0.140720] domain 0: span 0 >> >> [ 0.140739] groups: 0 >> >> [ 0.143270] net_namespace: 660 bytes >> >> [ 0.143314] Booting paravirtualized kernel on bare hardware >> >> [ 0.145944] NET: Registered protocol family 16 >> >> [ 0.153024] PCI: PCI BIOS revision 2.10 entry at 0xfd9cc, last bus=1 >> >> [ 0.153057] PCI: Using configuration type 1 for base access >> >> [ 0.153082] Setting up standard PCI resources >> >> [ 0.168352] ACPI: Interpreter disabled. >> >> [ 0.168386] Linux Plug and Play Support v0.97 (c) Adam Belay >> >> [ 0.169043] pnp: PnP ACPI: disabled >> >> [ 0.169077] PnPBIOS: Scanning system for PnP BIOS support... >> >> [ 0.169243] PnPBIOS: Found PnP BIOS installation structure at >> >> 0xc00f7b90 >> >> [ 0.169273] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa38b, >> >> dseg 0x400 >> >> [ 0.189159] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by >> >> driver >> >> [ 0.195069] PCI: Probing PCI hardware >> >> [ 0.195103] PCI: Probing PCI hardware (bus 00) >> >> [ 0.196527] * Found PM-Timer Bug on the chipset. Due to workarounds >> >> for a bug, >> >> [ 0.196547] * this clock source is slow. Consider trying other clock >> >> sources >> >> [ 0.196674] pci 0000:00:07.3: quirk: region 8000-803f claimed by >> >> PIIX4 ACPI >> >> [ 0.196705] pci 0000:00:07.3: quirk: region 2180-218f claimed by >> >> PIIX4 SMB >> >> [ 0.204349] PCI: Using IRQ router PIIX/ICH [8086/7110] at >> >> 0000:00:07.0 >> >> [ 0.204473] PCI: setting IRQ 9 as level-triggered >> >> [ 0.204499] PCI: Found IRQ 9 for device 0000:00:0f.0 >> >> [ 0.204565] PCI: Sharing IRQ 9 with 0000:00:14.0 >> >> [ 0.206313] system 00:00: iomem range 0xfff80000-0xffffffff could >> >> not be reserved >> >> [ 0.206407] system 00:01: iomem range 0x0-0x9ffff could not be >> >> reserved >> >> [ 0.206438] system 00:01: iomem range 0xe0000-0xfffff could not be >> >> reserved >> >> [ 0.206466] system 00:01: iomem range 0x100000-0x7ffffff could not >> >> be reserved >> >> [ 0.206572] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved >> >> [ 0.206603] system 00:0a: ioport range 0x8000-0x803f has been >> >> reserved >> >> [ 0.206629] system 00:0a: ioport range 0x2180-0x218f has been >> >> reserved >> >> [ 0.214772] PCI: Bridge: 0000:00:01.0 >> >> [ 0.214802] IO window: disabled. >> >> [ 0.214825] MEM window: disabled. >> >> [ 0.214844] PREFETCH window: disabled. >> >> [ 0.215125] NET: Registered protocol family 2 >> >> [ 0.216435] IP route cache hash table entries: 1024 (order: 0, 4096 >> >> bytes) >> >> [ 0.218451] TCP established hash table entries: 4096 (order: 3, >> >> 32768 bytes) >> >> [ 0.218758] TCP bind hash table entries: 4096 (order: 3, 32768 >> >> bytes) >> >> [ 0.219079] TCP: Hash tables configured (established 4096 bind 4096) >> >> [ 0.219103] TCP reno registered >> >> [ 0.220088] NET: Registered protocol family 1 >> >> [ 0.221113] checking if image is initramfs... it is >> >> [ 5.337205] Freeing initrd memory: 6023k freed >> >> [ 5.344636] audit: initializing netlink socket (disabled) >> >> [ 5.344731] type=2000 audit(1239528267.344:1): initialized >> >> [ 5.345896] Total HugeTLB memory allocated, 0 >> >> [ 5.346815] VFS: Disk quotas dquot_6.5.1 >> >> [ 5.347114] Dquot-cache hash table entries: 1024 (order 0, 4096 >> >> bytes) >> >> [ 5.347555] msgmni has been set to 246 >> >> [ 5.349105] Block layer SCSI generic (bsg) driver version 0.4 >> >> loaded (major 253) >> >> [ 5.349145] io scheduler noop registered >> >> [ 5.349163] io scheduler anticipatory registered >> >> [ 5.349181] io scheduler deadline registered >> >> [ 5.349344] io scheduler cfq registered (default) >> >> [ 5.349412] pci 0000:00:00.0: Limiting direct PCI/PCI transfers >> >> [ 5.349538] pci 0000:00:14.0: Boot video device >> >> [ 5.355215] isapnp: Scanning for PnP cards... >> >> [ 5.465580] 01:01: card 'CRD4237B-5' >> >> [ 5.465612] isapnp: 1 Plug & Play card detected total >> >> [ 5.517472] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, >> >> IRQ sharing enabled >> >> [ 5.518390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> >> [ 5.524339] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> >> [ 5.552352] brd: module loaded >> >> [ 5.553992] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq >> >> 1,12 >> >> [ 5.558114] serio: i8042 KBD port at 0x60,0x64 irq 1 >> >> [ 5.558181] serio: i8042 AUX port at 0x60,0x64 irq 12 >> >> [ 5.560886] mice: PS/2 mouse device common for all mice >> >> [ 5.562978] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 >> >> [ 5.563073] rtc0: alarms up to one day >> >> [ 5.563770] cpuidle: using governor ladder >> >> [ 5.563801] cpuidle: using governor menu >> >> [ 5.563860] No iBFT detected. >> >> [ 5.567791] TCP cubic registered >> >> [ 5.567829] NET: Registered protocol family 17 >> >> [ 5.567887] Using IPI No-Shortcut mode >> >> [ 5.570094] registered taskstats version 1 >> >> [ 5.570719] rtc_cmos 00:05: setting system clock to 2009-04-12 >> >> 09:24:28 UTC (1239528268) >> >> [ 5.572525] Freeing unused kernel memory: 244k freed >> >> [ 6.671691] thermal: Unknown symbol acpi_processor_set_thermal_limit >> >> [ 11.279535] FDC 0 is a post-1991 82077 >> >> [ 11.288680] usbcore: registered new interface driver usbfs >> >> [ 11.288981] usbcore: registered new interface driver hub >> >> [ 11.289542] usbcore: registered new device driver usb >> >> [ 11.418063] SCSI subsystem initialized >> >> [ 11.457426] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) >> >> [ 11.457577] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not >> >> an 8139C+ compatible chip >> >> [ 11.466112] 8139cp 0000:00:0f.0: Try the "8139too" driver instead. >> >> [ 11.502056] USB Universal Host Controller Interface driver v3.0 >> >> [ 11.502334] uhci_hcd 0000:00:07.2: enabling device (0000 -> 0001) >> >> [ 11.502388] PCI: setting IRQ 10 as level-triggered >> >> [ 11.502409] PCI: Assigned IRQ 10 for device 0000:00:07.2 >> >> [ 11.502514] uhci_hcd 0000:00:07.2: UHCI Host Controller >> >> [ 11.503231] uhci_hcd 0000:00:07.2: new USB bus registered, assigned >> >> bus number 1 >> >> [ 11.503355] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000fcc0 >> >> [ 11.504347] usb usb1: configuration #1 chosen from 1 choice >> >> [ 11.504738] hub 1-0:1.0: USB hub found >> >> [ 11.504850] hub 1-0:1.0: 2 ports detected >> >> [ 11.574015] 8139too Fast Ethernet driver 0.9.28 >> >> [ 11.823971] usb usb1: New USB device found, idVendor=1d6b, >> >> idProduct=0001 >> >> [ 11.824009] usb usb1: New USB device strings: Mfr=3, Product=2, >> >> SerialNumber=1 >> >> [ 11.824033] usb usb1: Product: UHCI Host Controller >> >> [ 11.824052] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd >> >> [ 11.824071] usb usb1: SerialNumber: 0000:00:07.2 >> >> [ 11.824865] 8139too 0000:00:0f.0: enabling device (0000 -> 0003) >> >> [ 11.824913] PCI: Found IRQ 9 for device 0000:00:0f.0 >> >> [ 11.824988] PCI: Sharing IRQ 9 with 0000:00:14.0 >> >> [ 11.827560] eth0: RealTek RTL8139 at 0xf800, 00:05:1c:15:b0:6e, IRQ >> >> 9 >> >> [ 11.827594] eth0: Identified 8139 chip type 'RTL-8100B/8139D' >> >> [ 11.850569] libata version 3.00 loaded. >> >> [ 12.059682] Uniform Multi-Platform E-IDE driver >> >> [ 12.059729] ide: Assuming 33MHz system bus speed for PIO modes; >> >> override with idebus=xx >> >> [ 12.080991] PIIX4: IDE controller (0x8086:0x7111 rev 0x01) at PCI >> >> slot 0000:00:07.1 >> >> [ 12.081072] PIIX4: not 100% native mode: will probe irqs later >> >> [ 12.081123] ide0: BM-DMA at 0xfcf0-0xfcf7 >> >> [ 12.081178] ide1: BM-DMA at 0xfcf8-0xfcff >> >> [ 12.081213] Probing IDE interface ide0... >> >> [ 12.368571] hda: ST310211A, ATA DISK drive >> >> [ 13.040659] hda: host max PIO4 wanted PIO255(auto-tune) selected >> >> PIO4 >> >> [ 13.040884] hda: UDMA/33 mode selected >> >> [ 13.040985] Probing IDE interface ide1... >> >> [ 13.776653] hdc: LEOPTICS CD-ROM 24X v2.2C, ATAPI CD/DVD-ROM drive >> >> [ 14.112666] hdc: host max PIO4 wanted PIO255(auto-tune) selected >> >> PIO4 >> >> [ 14.112836] hdc: MWDMA2 mode selected >> >> [ 14.113091] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >> >> [ 14.113323] ide1 at 0x170-0x177,0x376 on irq 15 >> >> [ 14.448439] hda: max request size: 128KiB >> >> [ 14.534166] hda: 19541088 sectors (10005 MB) w/1024KiB Cache, >> >> CHS=19386/16/63 >> >> [ 14.534210] hda: cache flushes not supported >> >> [ 14.534526] hda: hda1 hda2 < hda5 > >> >> [ 14.594238] hdc: ATAPI 20X CD-ROM drive, 128kB Cache >> >> [ 14.594288] Uniform CD-ROM driver Revision: 3.20 >> >> [ 15.136450] PM: Starting manual resume from disk >> >> [ 15.394219] EXT3-fs: INFO: recovery required on readonly filesystem. >> >> [ 15.394256] EXT3-fs: write access will be enabled during recovery. >> >> [ 16.694052] kjournald starting. Commit interval 5 seconds >> >> [ 16.694167] EXT3-fs: hda1: orphan cleanup on readonly fs >> >> [ 16.694230] ext3_orphan_cleanup: deleting unreferenced inode 286729 >> >> [ 16.694429] ext3_orphan_cleanup: deleting unreferenced inode 286728 >> >> [ 16.694533] ext3_orphan_cleanup: deleting unreferenced inode 286727 >> >> [ 16.694631] ext3_orphan_cleanup: deleting unreferenced inode 286726 >> >> [ 16.694857] ext3_orphan_cleanup: deleting unreferenced inode 286725 >> >> [ 16.694944] EXT3-fs: hda1: 5 orphan inodes deleted >> >> [ 16.694968] EXT3-fs: recovery complete. >> >> [ 16.735943] EXT3-fs: mounted filesystem with ordered data mode. >> >> [ 17.859848] spurious 8259A interrupt: IRQ7. >> >> [ 20.248151] udevd version 125 started >> >> [ 26.125560] input: PC Speaker as /class/input/input0 >> >> [ 30.281356] Linux agpgart interface v0.103 >> >> [ 30.422789] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >> >> [ 30.669684] shpchp: Standard Hot Plug PCI Controller Driver version: >> >> 0.4 >> >> [ 31.741028] agpgart: Detected an Intel 440LX Chipset. >> >> [ 31.750189] agpgart: AGP aperture is 64M @ 0xf4000000 >> >> [ 32.839954] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device >> >> [ 33.188787] Error: Driver 'pcspkr' is already registered, >> >> aborting... >> >> [ 33.425456] parport_pc 00:10: reported by Plug and Play BIOS >> >> [ 33.425536] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] >> >> [ 34.034629] ns558 01:01.01: activated >> >> [ 34.063541] gameport: NS558 PnP Gameport is pnp01:01.01/gameport0, >> >> io 0x200, speed 727kHz >> >> [ 34.179454] cs4236_isapnp 01:01.00: activated >> >> [ 34.182287] cs4236_isapnp 01:01.02: activated >> >> [ 34.185549] cs4236_isapnp 01:01.03: activated >> >> [ 38.965548] Adding 465844k swap on /dev/hda5. Priority:-1 >> >> extents:1 across:465844k >> >> [ 39.618203] EXT3 FS on hda1, internal journal >> >> [ 40.922052] loop: module loaded >> >> [ 43.891563] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 >> >> [ 48.185069] NET: Registered protocol family 10 >> >> [ 48.189408] lo: Disabled Privacy Extensions >> >> [ 58.985185] eth0: no IPv6 routers present >> >> >> >> >> >> On Sat, Apr 11, 2009 at 8:32 AM, Robert Hancock <hancockrwd@xxxxxxxxx> >> >> wrote: >> >> > Ken Perl wrote: >> >> >> >> >> >> After I replaced my mainboard, then I can see errors related to ACPI >> >> >> during the Linux booting, I can also reproduce it with command >> >> >> below, >> >> >> >> >> >> moproble fan processor thermap >> >> >> >> >> >> I got error "no such device", I ever tried to append following >> >> >> lines >> >> >> to the /etc/modprobe.d/blacklist but can not succeed, I can still >> >> >> see >> >> >> same error during boot, another error is "ACPI unable to load system >> >> >> description tables", >> >> >> >> >> >> blacklist fan >> >> >> blacklist processor >> >> >> blacklist thermap >> >> >> >> >> >> Do these a big problem? Can anyone tell how I can fix the issue? >> >> >> >> >> > >> >> > Can you post your dmesg output? Make sure that the motherboard >> >> > doesn't have >> >> > ACPI disabled in the BIOS or something (I don't think many even have >> >> > that >> >> > option anymore, but who knows). >> >> > >> >> >> >> >> >> >> >> -- >> >> perl -e 'print unpack(u,"62V5N\"FME;G\!E<FQ`9VUA:6PN8V]M\"\@`` >> >> ")' >> >> -- >> >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" >> >> in >> >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> > >> > >> >> >> >> -- >> perl -e 'print unpack(u,"62V5N\"FME;G\!E<FQ`9VUA:6PN8V]M\"\@`` >> ")' >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- perl -e 'print unpack(u,"62V5N\"FME;G\!E<FQ`9VUA:6PN8V]M\"\@`` ")' -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
