Re: [2.6.29-rc2] ALi USB OHCI enables interrupts during power down in suspend.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 19 January 2009, Andrey Borzenkov wrote:
> On 19 января 2009 12:51:12 Rafael J. Wysocki wrote:
> > On Monday 19 January 2009, Andrey Borzenkov wrote:
> > > On 19 января 2009 03:17:49 Rafael J. Wysocki wrote:
> > > > On Sunday 18 January 2009, Andrey Borzenkov wrote:
> > > > > On 18 января 2009 23:21:24 Rafael J. Wysocki wrote:
> > > > > > > > As far as I can tell, timekeeping_resume is called via
> > > > > > > > class ->resume method; and according to comments in
> > > > > > > > sysdev_resume() and device_power_up(), they are called
> > > > > > > > with interrupts disabled.
> > > > > > > >
> > > > > > > > Looking at suspend_enter, irqs *are* disabled at this
> > > > > > > > point.
> > > > > > > >
> > > > > > > > So it actually looks like something (may be some driver)
> > > > > > > > unconditionally enabled irqs in resume path.
> > > > > > > >
> > > > > > > > I believe the patch should be hold back until this is
> > > > > > > > clarified.
> > > > > > >
> > > > > > > That's a nice theory!
> > > > > >
> > > > > > That would be a bad bug.
> [...]
> >
> > However, I suspect the problem is somewhere else.
> >
> 
> Right. 
> 
> > Can you apply the patch I sent earlier in this thread
> > (http://lkml.org/lkml/2009/1/18/183) and retest?
> >
> 
> I did and it was silent. But with patch below I get:
> 
> [  152.526550] Freezing user space processes ... (elapsed 0.01 seconds) 
> done.
> [  152.544162] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) 
> done.
> [  152.544854] Suspending console(s) (use no_console_suspend to debug)
> [  152.556234] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [  152.907091] sd 0:0:0:0: [sda] Stopping disk
> [  153.579824] pci 0000:01:00.0: power state changed by ACPI to D3
> [  153.594449] e100 0000:00:0a.0: PME# enabled
> [  153.594688] e100 0000:00:0a.0: wake-up capability enabled by ACPI
> [  153.594855] e100 0000:00:0a.0: PCI INT A disabled
> [  153.650834] ALI 5451 0000:00:06.0: PCI INT A disabled
> [  153.663826] ALI 5451 0000:00:06.0: power state changed by ACPI to D3
> [  154.417072] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
> [  154.430275] ohci_hcd 0000:00:02.0: PME# enabled
> [  154.430490] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
> [  154.430520] ohci_hcd 0000:00:02.0: PCI INT A disabled
> [  154.446867] ACPI: Preparing to enter system sleep state S3
> [  154.460237] ------------[ cut here ]------------
> [  154.460250] WARNING: at /home/bor/src/linux-
> git/drivers/base/power/main.c:579 device_power_down+0x18f/0x1e0()
> [  154.460259] Hardware name: PORTEGE 4000
> [  154.460265] Interrupts enabled after 0000:00:02.0!
> 
> The device is
> 
> {pts/2}% lspci -nnv -s 00:02.0
> 00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller 
> [10b9:5237] (rev 03) (prog-if 10 [OHCI])
>         Subsystem: Toshiba America Info Systems Device [1179:0004]
>         Flags: bus master, medium devsel, latency 64, IRQ 11
>         Memory at f7eff000 (32-bit, non-prefetchable) [size=4K]
>         Capabilities: <access denied>
>         Kernel driver in use: ohci_hcd
>         Kernel modules: ohci-hcd
> 
> and this does not surprise me at all given all the problems I had with this 
> USB controller.
> 
> Suspicious is 
> 
> ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
> 
> this controller has history of broken wake up functionality.

Ah.

Can you please check if the appended patch fixes the issue for you?

Rafael


---
 drivers/usb/core/hcd-pci.c  |  116 ++++++++++----------------------------------
 drivers/usb/core/hcd.h      |    1 
 drivers/usb/host/ehci-pci.c |    1 
 drivers/usb/host/ohci-pci.c |    1 
 drivers/usb/host/uhci-hcd.c |    1 
 5 files changed, 27 insertions(+), 93 deletions(-)

Index: linux-2.6/drivers/usb/core/hcd-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/core/hcd-pci.c
+++ linux-2.6/drivers/usb/core/hcd-pci.c
@@ -200,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *
 	struct usb_hcd		*hcd = pci_get_drvdata(dev);
 	int			retval = 0;
 	int			wake, w;
+	int			has_pci_pm;
 
 	/* Root hub suspend should have stopped all downstream traffic,
 	 * and all bus master traffic.  And done so for both the interface
@@ -229,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *
 
 	synchronize_irq(dev->irq);
 
+	/* Downstream ports from this root hub should already be quiesced, so
+	 * there will be no DMA activity.  Now we can shut down the upstream
+	 * link (except maybe for PME# resume signaling) and enter some PCI
+	 * low power state, if the hardware allows.
+	 */
+	pci_disable_device(dev);
+
+	pci_save_state(dev);
+
 	/* Don't fail on error to enable wakeup.  We rely on pci code
 	 * to reject requests the hardware can't implement, rather
 	 * than coding the same thing.
@@ -240,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *
 		wake = w;
 	dev_dbg(&dev->dev, "wakeup: %d\n", wake);
 
-	/* Downstream ports from this root hub should already be quiesced, so
-	 * there will be no DMA activity.  Now we can shut down the upstream
-	 * link (except maybe for PME# resume signaling) and enter some PCI
-	 * low power state, if the hardware allows.
-	 */
-	pci_disable_device(dev);
- done:
-	return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
-	int			retval = 0;
-	int			has_pci_pm;
-
-	/* We might already be suspended (runtime PM -- not yet written) */
-	if (dev->current_state != PCI_D0)
-		goto done;
-
-	pci_save_state(dev);
-
 	/* Don't change state if we don't need to */
 	if (message.event == PM_EVENT_FREEZE ||
 			message.event == PM_EVENT_PRETHAW) {
@@ -314,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_
  done:
 	return retval;
 }
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
 
 /**
  * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -324,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_la
  */
 int usb_hcd_pci_resume_early(struct pci_dev *dev)
 {
-	int		retval = 0;
-	pci_power_t	state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
-	/* Reenable ASIC clocks for USB */
-	if (machine_is(powermac)) {
-		struct device_node *of_node;
-
-		of_node = pci_device_to_OF_node(dev);
-		if (of_node)
-			pmac_call_feature(PMAC_FTR_USB_ENABLE,
-						of_node, 0, 1);
-	}
-#endif
-
-	/* NOTE:  chip docs cover clean "real suspend" cases (what Linux
-	 * calls "standby", "suspend to RAM", and so on).  There are also
-	 * dirty cases when swsusp fakes a suspend in "shutdown" mode.
-	 */
-	if (state != PCI_D0) {
-#ifdef	DEBUG
-		int	pci_pm;
-		u16	pmcr;
-
-		pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-		pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
-		pmcr &= PCI_PM_CTRL_STATE_MASK;
-		if (pmcr) {
-			/* Clean case:  power to USB and to HC registers was
-			 * maintained; remote wakeup is easy.
-			 */
-			dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
-		} else {
-			/* Clean:  HC lost Vcc power, D0 uninitialized
-			 *   + Vaux may have preserved port and transceiver
-			 *     state ... for remote wakeup from D3cold
-			 *   + or not; HCD must reinit + re-enumerate
-			 *
-			 * Dirty: D0 semi-initialized cases with swsusp
-			 *   + after BIOS init
-			 *   + after Linux init (HCD statically linked)
-			 */
-			dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
-					state);
-		}
-#endif
-
-		retval = pci_set_power_state(dev, PCI_D0);
-	} else {
-		/* Same basic cases: clean (powered/not), dirty */
-		dev_dbg(&dev->dev, "PCI legacy resume\n");
-	}
-
-	if (retval < 0)
-		dev_err(&dev->dev, "can't resume: %d\n", retval);
-	else
-		pci_restore_state(dev);
-
-	return retval;
+	pci_restore_state(dev);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
 
@@ -397,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *d
 	struct usb_hcd		*hcd;
 	int			retval;
 
+#ifdef CONFIG_PPC_PMAC
+	/* Reenable ASIC clocks for USB */
+	if (machine_is(powermac)) {
+		struct device_node *of_node;
+
+		of_node = pci_device_to_OF_node(dev);
+		if (of_node)
+			pmac_call_feature(PMAC_FTR_USB_ENABLE,
+						of_node, 0, 1);
+	}
+#endif
+
 	hcd = pci_get_drvdata(dev);
 	if (hcd->state != HC_STATE_SUSPENDED) {
 		dev_dbg(hcd->self.controller,
@@ -404,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *d
 		return 0;
 	}
 
+	pci_enable_wake(dev, PCI_D0, false);
+
 	retval = pci_enable_device(dev);
 	if (retval < 0) {
 		dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
Index: linux-2.6/drivers/usb/core/hcd.h
===================================================================
--- linux-2.6.orig/drivers/usb/core/hcd.h
+++ linux-2.6/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pc
 
 #ifdef CONFIG_PM
 extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
 extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
 extern int usb_hcd_pci_resume(struct pci_dev *dev);
 #endif /* CONFIG_PM */
Index: linux-2.6/drivers/usb/host/ehci-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/ehci-pci.c
+++ linux-2.6/drivers/usb/host/ehci-pci.c
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
Index: linux-2.6/drivers/usb/host/ohci-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/ohci-pci.c
+++ linux-2.6/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif
Index: linux-2.6/drivers/usb/host/uhci-hcd.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/uhci-hcd.c
+++ linux-2.6/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver
 
 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
-	.suspend_late =	usb_hcd_pci_suspend_late,
 	.resume_early =	usb_hcd_pci_resume_early,
 	.resume =	usb_hcd_pci_resume,
 #endif	/* PM */

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux