From: Bob Moore <robert.moore@xxxxxxxxx>
Reformat comments to use fewer lines.
Signed-off-by: Bob Moore <robert.moore@xxxxxxxxx>
Signed-off-by: Lin Ming <ming.m.lin@xxxxxxxxx>
Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
---
drivers/acpi/events/evevent.c | 14 ++--
drivers/acpi/events/evgpe.c | 36 ++++++------
drivers/acpi/events/evgpeblk.c | 38 ++++++------
drivers/acpi/events/evmisc.c | 29 ++++-----
drivers/acpi/events/evregion.c | 133 +++++++++++++++++++---------------------
drivers/acpi/events/evrgnini.c | 41 ++++++-------
drivers/acpi/events/evsci.c | 10 +--
drivers/acpi/events/evxface.c | 2 +-
drivers/acpi/events/evxfevnt.c | 12 ++--
9 files changed, 152 insertions(+), 163 deletions(-)
diff --git a/drivers/acpi/events/evevent.c b/drivers/acpi/events/evevent.c
index c56c5c6..6ddf938 100644
--- a/drivers/acpi/events/evevent.c
+++ b/drivers/acpi/events/evevent.c
@@ -72,8 +72,8 @@ acpi_status acpi_ev_initialize_events(void)
/*
* Initialize the Fixed and General Purpose Events. This is done prior to
- * enabling SCIs to prevent interrupts from occurring before the handlers are
- * installed.
+ * enabling SCIs to prevent interrupts from occurring before the handlers
+ * are installed.
*/
status = acpi_ev_fixed_event_initialize();
if (ACPI_FAILURE(status)) {
@@ -192,8 +192,8 @@ static acpi_status acpi_ev_fixed_event_initialize(void)
acpi_status status;
/*
- * Initialize the structure that keeps track of fixed event handlers
- * and enable the fixed events.
+ * Initialize the structure that keeps track of fixed event handlers and
+ * enable the fixed events.
*/
for (i = 0; i < ACPI_NUM_FIXED_EVENTS; i++) {
acpi_gbl_fixed_event_handlers[i].handler = NULL;
@@ -237,7 +237,7 @@ u32 acpi_ev_fixed_event_detect(void)
/*
* Read the fixed feature status and enable registers, as all the cases
- * depend on their values. Ignore errors here.
+ * depend on their values. Ignore errors here.
*/
(void)acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS, &fixed_status);
(void)acpi_hw_register_read(ACPI_REGISTER_PM1_ENABLE, &fixed_enable);
@@ -291,8 +291,8 @@ static u32 acpi_ev_fixed_event_dispatch(u32 event)
status_register_id, 1);
/*
- * Make sure we've got a handler. If not, report an error.
- * The event is disabled to prevent further interrupts.
+ * Make sure we've got a handler. If not, report an error. The event is
+ * disabled to prevent further interrupts.
*/
if (NULL == acpi_gbl_fixed_event_handlers[event].handler) {
(void)acpi_set_register(acpi_gbl_fixed_event_info[event].
diff --git a/drivers/acpi/events/evgpe.c b/drivers/acpi/events/evgpe.c
index f45c74f..12b49d3 100644
--- a/drivers/acpi/events/evgpe.c
+++ b/drivers/acpi/events/evgpe.c
@@ -125,7 +125,7 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
(1 <<
(gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
- /* 1) Disable case. Simply clear all enable bits */
+ /* 1) Disable case. Simply clear all enable bits */
if (type == ACPI_GPE_DISABLE) {
ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
@@ -134,7 +134,7 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info,
return_ACPI_STATUS(AE_OK);
}
- /* 2) Enable case. Set/Clear the appropriate enable bits */
+ /* 2) Enable case. Set/Clear the appropriate enable bits */
switch (gpe_event_info->flags & ACPI_GPE_TYPE_MASK) {
case ACPI_GPE_TYPE_WAKE:
@@ -295,7 +295,7 @@ acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info)
*
* FUNCTION: acpi_ev_get_gpe_event_info
*
- * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1
+ * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1
* gpe_number - Raw GPE number
*
* RETURN: A GPE event_info struct. NULL if not a valid GPE
@@ -372,7 +372,7 @@ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
- * DESCRIPTION: Detect if any GP events have occurred. This function is
+ * DESCRIPTION: Detect if any GP events have occurred. This function is
* executed at interrupt level.
*
******************************************************************************/
@@ -400,8 +400,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
/*
* We need to obtain the GPE lock for both the data structs and registers
- * Note: Not necessary to obtain the hardware lock, since the GPE registers
- * are owned by the gpe_lock.
+ * Note: Not necessary to obtain the hardware lock, since the GPE
+ * registers are owned by the gpe_lock.
*/
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
@@ -410,9 +410,8 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
gpe_block = gpe_xrupt_list->gpe_block_list_head;
while (gpe_block) {
/*
- * Read all of the 8-bit GPE status and enable registers
- * in this GPE block, saving all of them.
- * Find all currently active GP events.
+ * Read all of the 8-bit GPE status and enable registers in this GPE
+ * block, saving all of them. Find all currently active GP events.
*/
for (i = 0; i < gpe_block->register_count; i++) {
@@ -527,8 +526,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
(void)acpi_ev_enable_gpe(gpe_event_info, FALSE);
/*
- * Take a snapshot of the GPE info for this level - we copy the
- * info to prevent a race condition with remove_handler/remove_block.
+ * Take a snapshot of the GPE info for this level - we copy the info to
+ * prevent a race condition with remove_handler/remove_block.
*/
ACPI_MEMCPY(&local_gpe_event_info, gpe_event_info,
sizeof(struct acpi_gpe_event_info));
@@ -539,8 +538,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
}
/*
- * Must check for control method type dispatch one more
- * time to avoid race with ev_gpe_install_handler
+ * Must check for control method type dispatch one more time to avoid a
+ * race with ev_gpe_install_handler
*/
if ((local_gpe_event_info.flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_METHOD) {
@@ -584,8 +583,8 @@ static void acpi_ev_asynch_enable_gpe(void *context)
if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
ACPI_GPE_LEVEL_TRIGGERED) {
/*
- * GPE is level-triggered, we clear the GPE status bit after
- * handling the event.
+ * GPE is level-triggered, we clear the GPE status bit after handling
+ * the event.
*/
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
@@ -624,7 +623,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
acpi_os_gpe_count(gpe_number);
/*
- * If edge-triggered, clear the GPE status bit now. Note that
+ * If edge-triggered, clear the GPE status bit now. Note that
* level-triggered events are cleared after the GPE is serviced.
*/
if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
@@ -650,7 +649,8 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
/*
* Invoke the installed handler (at interrupt level)
- * Ignore return status for now. TBD: leave GPE disabled on error?
+ * Ignore return status for now.
+ * TBD: leave GPE disabled on error?
*/
(void)gpe_event_info->dispatch.handler->address(gpe_event_info->
dispatch.
@@ -708,7 +708,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
gpe_number));
/*
- * Disable the GPE. The GPE will remain disabled until the ACPI
+ * Disable the GPE. The GPE will remain disabled until the ACPICA
* Core Subsystem is restarted, or a handler is installed.
*/
status = acpi_ev_disable_gpe(gpe_event_info);
diff --git a/drivers/acpi/events/evgpeblk.c b/drivers/acpi/events/evgpeblk.c
index 73c058e..7537cda 100644
--- a/drivers/acpi/events/evgpeblk.c
+++ b/drivers/acpi/events/evgpeblk.c
@@ -309,17 +309,17 @@ acpi_ev_save_method_info(acpi_handle obj_handle,
(gpe_block->block_base_number +
(gpe_block->register_count * 8)))) {
/*
- * Not valid for this GPE block, just ignore it
- * However, it may be valid for a different GPE block, since GPE0 and GPE1
- * methods both appear under \_GPE.
+ * Not valid for this GPE block, just ignore it. However, it may be
+ * valid for a different GPE block, since GPE0 and GPE1 methods both
+ * appear under \_GPE.
*/
return_ACPI_STATUS(AE_OK);
}
/*
- * Now we can add this information to the gpe_event_info block
- * for use during dispatch of this GPE. Default type is RUNTIME, although
- * this may change when the _PRW methods are executed later.
+ * Now we can add this information to the gpe_event_info block for use
+ * during dispatch of this GPE. Default type is RUNTIME, although this may
+ * change when the _PRW methods are executed later.
*/
gpe_event_info =
&gpe_block->event_info[gpe_number - gpe_block->block_base_number];
@@ -394,8 +394,8 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
gpe_block = gpe_info->gpe_block;
/*
- * The _PRW object must return a package, we are only interested
- * in the first element
+ * The _PRW object must return a package, we are only interested in the
+ * first element
*/
obj_desc = pkg_desc->package.elements[0];
@@ -434,7 +434,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
/*
* Is this GPE within this block?
*
- * TRUE iff these conditions are true:
+ * TRUE if and only if these conditions are true:
* 1) The GPE devices match.
* 2) The GPE index(number) is within the range of the Gpe Block
* associated with the GPE device.
@@ -457,6 +457,7 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
if (ACPI_FAILURE(status)) {
goto cleanup;
}
+
status =
acpi_ev_update_gpe_enable_masks(gpe_event_info,
ACPI_GPE_DISABLE);
@@ -476,9 +477,9 @@ acpi_ev_match_prw_and_gpe(acpi_handle obj_handle,
* RETURN: A GPE interrupt block
*
* DESCRIPTION: Get or Create a GPE interrupt block. There is one interrupt
- * block per unique interrupt level used for GPEs.
- * Should be called only when the GPE lists are semaphore locked
- * and not subject to change.
+ * block per unique interrupt level used for GPEs. Should be
+ * called only when the GPE lists are semaphore locked and not
+ * subject to change.
*
******************************************************************************/
@@ -608,8 +609,9 @@ acpi_ev_delete_gpe_xrupt(struct acpi_gpe_xrupt_info *gpe_xrupt)
*
* FUNCTION: acpi_ev_install_gpe_block
*
- * PARAMETERS: gpe_block - New GPE block
- * interrupt_number - Xrupt to be associated with this GPE block
+ * PARAMETERS: gpe_block - New GPE block
+ * interrupt_number - Xrupt to be associated with this
+ * GPE block
*
* RETURN: Status
*
@@ -666,7 +668,7 @@ acpi_ev_install_gpe_block(struct acpi_gpe_block_info *gpe_block,
*
* FUNCTION: acpi_ev_delete_gpe_block
*
- * PARAMETERS: gpe_block - Existing GPE block
+ * PARAMETERS: gpe_block - Existing GPE block
*
* RETURN: Status
*
@@ -786,9 +788,9 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
/*
* Initialize the GPE Register and Event structures. A goal of these
- * tables is to hide the fact that there are two separate GPE register sets
- * in a given GPE hardware block, the status registers occupy the first half,
- * and the enable registers occupy the second half.
+ * tables is to hide the fact that there are two separate GPE register
+ * sets in a given GPE hardware block, the status registers occupy the
+ * first half, and the enable registers occupy the second half.
*/
this_register = gpe_register_info;
this_event = gpe_event_info;
diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c
index 82c457f..dbac5b3 100644
--- a/drivers/acpi/events/evmisc.c
+++ b/drivers/acpi/events/evmisc.c
@@ -148,7 +148,9 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node,
break;
default:
+
/* All other types are not supported */
+
return (AE_TYPE);
}
}
@@ -189,9 +191,8 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node,
acpi_ut_delete_generic_state(notify_info);
}
} else {
- /*
- * There is no notify handler (per-device or system) for this device.
- */
+ /* There is no notify handler (per-device or system) for this device */
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No notify handler for Notify (%4.4s, %X) node %p\n",
acpi_ut_get_node_name(node), notify_value,
@@ -225,9 +226,8 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context)
ACPI_FUNCTION_ENTRY();
/*
- * We will invoke a global notify handler if installed.
- * This is done _before_ we invoke the per-device handler attached
- * to the device.
+ * We will invoke a global notify handler if installed. This is done
+ * _before_ we invoke the per-device handler attached to the device.
*/
if (notify_info->notify.value <= ACPI_MAX_SYS_NOTIFY) {
@@ -339,11 +339,10 @@ acpi_status acpi_ev_init_global_lock_handler(void)
NULL);
/*
- * If the global lock does not exist on this platform, the attempt
- * to enable GBL_STATUS will fail (the GBL_ENABLE bit will not stick)
- * Map to AE_OK, but mark global lock as not present.
- * Any attempt to actually use the global lock will be flagged
- * with an error.
+ * If the global lock does not exist on this platform, the attempt to
+ * enable GBL_STATUS will fail (the GBL_ENABLE bit will not stick).
+ * Map to AE_OK, but mark global lock as not present. Any attempt to
+ * actually use the global lock will be flagged with an error.
*/
if (status == AE_NO_HARDWARE_RESPONSE) {
ACPI_ERROR((AE_INFO,
@@ -452,8 +451,8 @@ acpi_status acpi_ev_acquire_global_lock(u16 timeout)
}
/*
- * Make sure that a global lock actually exists. If not, just treat
- * the lock as a standard mutex.
+ * Make sure that a global lock actually exists. If not, just treat the
+ * lock as a standard mutex.
*/
if (!acpi_gbl_global_lock_present) {
acpi_gbl_global_lock_acquired = TRUE;
@@ -572,8 +571,8 @@ void acpi_ev_terminate(void)
if (acpi_gbl_events_initialized) {
/*
- * Disable all event-related functionality.
- * In all cases, on error, print a message but obviously we don't abort.
+ * Disable all event-related functionality. In all cases, on error,
+ * print a message but obviously we don't abort.
*/
/* Disable all fixed events */
diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c
index 236fbd1..3ddddbf 100644
--- a/drivers/acpi/events/evregion.c
+++ b/drivers/acpi/events/evregion.c
@@ -48,16 +48,8 @@
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evregion")
-#define ACPI_NUM_DEFAULT_SPACES 4
-static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
- ACPI_ADR_SPACE_SYSTEM_MEMORY,
- ACPI_ADR_SPACE_SYSTEM_IO,
- ACPI_ADR_SPACE_PCI_CONFIG,
- ACPI_ADR_SPACE_DATA_TABLE
-};
/* Local prototypes */
-
static acpi_status
acpi_ev_reg_run(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
@@ -66,6 +58,17 @@ static acpi_status
acpi_ev_install_handler(acpi_handle obj_handle,
u32 level, void *context, void **return_value);
+/* These are the address spaces that will get default handlers */
+
+#define ACPI_NUM_DEFAULT_SPACES 4
+
+static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
+ ACPI_ADR_SPACE_SYSTEM_MEMORY,
+ ACPI_ADR_SPACE_SYSTEM_IO,
+ ACPI_ADR_SPACE_PCI_CONFIG,
+ ACPI_ADR_SPACE_DATA_TABLE
+};
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_install_region_handlers
@@ -91,18 +94,19 @@ acpi_status acpi_ev_install_region_handlers(void)
}
/*
- * All address spaces (PCI Config, EC, SMBus) are scope dependent
- * and registration must occur for a specific device.
+ * All address spaces (PCI Config, EC, SMBus) are scope dependent and
+ * registration must occur for a specific device.
*
- * In the case of the system memory and IO address spaces there is currently
- * no device associated with the address space. For these we use the root.
+ * In the case of the system memory and IO address spaces there is
+ * currently no device associated with the address space. For these we
+ * use the root.
*
- * We install the default PCI config space handler at the root so
- * that this space is immediately available even though the we have
- * not enumerated all the PCI Root Buses yet. This is to conform
- * to the ACPI specification which states that the PCI config
- * space must be always available -- even though we are nowhere
- * near ready to find the PCI root buses at this point.
+ * We install the default PCI config space handler at the root so that
+ * this space is immediately available even though the we have not
+ * enumerated all the PCI Root Buses yet. This is to conform to the ACPI
+ * specification which states that the PCI config space must be always
+ * available -- even though we are nowhere near ready to find the PCI root
+ * buses at this point.
*
* NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
* has already been installed (via acpi_install_address_space_handler).
@@ -160,12 +164,11 @@ acpi_status acpi_ev_initialize_op_regions(void)
return_ACPI_STATUS(status);
}
- /*
- * Run the _REG methods for op_regions in each default address space
- */
- for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
+ /* Run the _REG methods for op_regions in each default address space */
- /* TBD: Make sure handler is the DEFAULT handler, otherwise
+ for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
+ /*
+ * TBD: Make sure handler is the DEFAULT handler, otherwise
* _REG will have already been run.
*/
status = acpi_ev_execute_reg_methods(acpi_gbl_root_node,
@@ -318,13 +321,13 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
}
/*
- * It may be the case that the region has never been initialized
+ * It may be the case that the region has never been initialized.
* Some types of regions require special init code
*/
if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
- /*
- * This region has not been initialized yet, do it
- */
+
+ /* This region has not been initialized yet, do it */
+
region_setup = handler_desc->address_space.setup;
if (!region_setup) {
@@ -339,9 +342,9 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
}
/*
- * We must exit the interpreter because the region
- * setup will potentially execute control methods
- * (e.g., _REG method for this region)
+ * We must exit the interpreter because the region setup will
+ * potentially execute control methods (for example, the _REG method
+ * for this region)
*/
acpi_ex_exit_interpreter();
@@ -364,9 +367,8 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
return_ACPI_STATUS(status);
}
- /*
- * Region initialization may have been completed by region_setup
- */
+ /* Region initialization may have been completed by region_setup */
+
if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE;
@@ -521,8 +523,8 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj,
}
/*
- * If the region has been activated, call the setup handler
- * with the deactivate notification
+ * If the region has been activated, call the setup handler with
+ * the deactivate notification
*/
if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
region_setup = handler_obj->address_space.setup;
@@ -668,8 +670,8 @@ acpi_ev_install_handler(acpi_handle obj_handle,
}
/*
- * We only care about regions.and objects
- * that are allowed to have address space handlers
+ * We only care about regions and objects that are allowed to have
+ * address space handlers
*/
if ((node->type != ACPI_TYPE_DEVICE) &&
(node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
@@ -710,9 +712,9 @@ acpi_ev_install_handler(acpi_handle obj_handle,
/*
* Since the object we found it on was a device, then it
* means that someone has already installed a handler for
- * the branch of the namespace from this device on. Just
+ * the branch of the namespace from this device on. Just
* bail out telling the walk routine to not traverse this
- * branch. This preserves the scoping rule for handlers.
+ * branch. This preserves the scoping rule for handlers.
*/
return (AE_CTRL_DEPTH);
}
@@ -723,9 +725,8 @@ acpi_ev_install_handler(acpi_handle obj_handle,
}
/*
- * As long as the device didn't have a handler for this
- * space we don't care about it. We just ignore it and
- * proceed.
+ * As long as the device didn't have a handler for this space we
+ * don't care about it. We just ignore it and proceed.
*/
return (AE_OK);
}
@@ -733,16 +734,14 @@ acpi_ev_install_handler(acpi_handle obj_handle,
/* Object is a Region */
if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
- /*
- * This region is for a different address space
- * -- just ignore it
- */
+
+ /* This region is for a different address space, just ignore it */
+
return (AE_OK);
}
/*
- * Now we have a region and it is for the handler's address
- * space type.
+ * Now we have a region and it is for the handler's address space type.
*
* First disconnect region for any previous handler (if any)
*/
@@ -786,9 +785,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node,
ACPI_FUNCTION_TRACE(ev_install_space_handler);
/*
- * This registration is valid for only the types below
- * and the root. This is where the default handlers
- * get placed.
+ * This registration is valid for only the types below and the root. This
+ * is where the default handlers get placed.
*/
if ((node->type != ACPI_TYPE_DEVICE) &&
(node->type != ACPI_TYPE_PROCESSOR) &&
@@ -848,8 +846,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node,
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {
/*
- * The attached device object already exists.
- * Make sure the handler is not already installed.
+ * The attached device object already exists. Make sure the handler
+ * is not already installed.
*/
handler_obj = obj_desc->device.handler;
@@ -864,8 +862,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node,
handler) {
/*
* It is (relatively) OK to attempt to install the SAME
- * handler twice. This can easily happen
- * with PCI_Config space.
+ * handler twice. This can easily happen with the
+ * PCI_Config space.
*/
status = AE_SAME_HANDLER;
goto unlock_and_exit;
@@ -925,9 +923,8 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node,
/*
* Install the handler
*
- * At this point there is no existing handler.
- * Just allocate the object for the handler and link it
- * into the list.
+ * At this point there is no existing handler. Just allocate the object
+ * for the handler and link it into the list.
*/
handler_obj =
acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
@@ -1000,11 +997,10 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
ACPI_FUNCTION_TRACE(ev_execute_reg_methods);
/*
- * Run all _REG methods for all Operation Regions for this
- * space ID. This is a separate walk in order to handle any
- * interdependencies between regions and _REG methods. (i.e. handlers
- * must be installed for all regions of this Space ID before we
- * can run any _REG methods)
+ * Run all _REG methods for all Operation Regions for this space ID. This
+ * is a separate walk in order to handle any interdependencies between
+ * regions and _REG methods. (i.e. handlers must be installed for all
+ * regions of this Space ID before we can run any _REG methods)
*/
status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run,
@@ -1042,8 +1038,8 @@ acpi_ev_reg_run(acpi_handle obj_handle,
}
/*
- * We only care about regions.and objects
- * that are allowed to have address space handlers
+ * We only care about regions.and objects that are allowed to have address
+ * space handlers
*/
if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
return (AE_OK);
@@ -1062,10 +1058,9 @@ acpi_ev_reg_run(acpi_handle obj_handle,
/* Object is a Region */
if (obj_desc->region.space_id != space_id) {
- /*
- * This region is for a different address space
- * -- just ignore it
- */
+
+ /* This region is for a different address space, just ignore it */
+
return (AE_OK);
}
diff --git a/drivers/acpi/events/evrgnini.c b/drivers/acpi/events/evrgnini.c
index 6b94b38..f9e561e 100644
--- a/drivers/acpi/events/evrgnini.c
+++ b/drivers/acpi/events/evrgnini.c
@@ -233,9 +233,9 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
if (ACPI_FAILURE(status)) {
if (status == AE_SAME_HANDLER) {
/*
- * It is OK if the handler is already installed on the root
- * bridge. Still need to return a context object for the
- * new PCI_Config operation region, however.
+ * It is OK if the handler is already installed on the
+ * root bridge. Still need to return a context object
+ * for the new PCI_Config operation region, however.
*/
status = AE_OK;
} else {
@@ -272,8 +272,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
}
/*
- * For PCI_Config space access, we need the segment, bus,
- * device and function numbers. Acquire them here.
+ * For PCI_Config space access, we need the segment, bus, device and
+ * function numbers. Acquire them here.
*
* Find the parent device object. (This allows the operation region to be
* within a subscope under the device, such as a control method.)
@@ -289,16 +289,16 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
}
/*
- * Get the PCI device and function numbers from the _ADR object
- * contained in the parent's scope.
+ * Get the PCI device and function numbers from the _ADR object contained
+ * in the parent's scope.
*/
status =
acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, pci_device_node,
&pci_value);
/*
- * The default is zero, and since the allocation above zeroed
- * the data, just do nothing on failure.
+ * The default is zero, and since the allocation above zeroed the data,
+ * just do nothing on failure.
*/
if (ACPI_SUCCESS(status)) {
pci_id->device = ACPI_HIWORD(ACPI_LODWORD(pci_value));
@@ -382,9 +382,8 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
struct acpi_compatible_id_list *cid;
u32 i;
- /*
- * Get the _HID and check for a PCI Root Bridge
- */
+ /* Get the _HID and check for a PCI Root Bridge */
+
status = acpi_ut_execute_HID(node, &hid);
if (ACPI_FAILURE(status)) {
return (FALSE);
@@ -394,10 +393,8 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
return (TRUE);
}
- /*
- * The _HID did not match.
- * Get the _CID and check for a PCI Root Bridge
- */
+ /* The _HID did not match. Get the _CID and check for a PCI Root Bridge */
+
status = acpi_ut_execute_CID(node, &cid);
if (ACPI_FAILURE(status)) {
return (FALSE);
@@ -516,9 +513,9 @@ acpi_ev_default_region_setup(acpi_handle handle,
* Get the appropriate address space handler for a newly
* created region.
*
- * This also performs address space specific initialization. For
+ * This also performs address space specific initialization. For
* example, PCI regions must have an _ADR object that contains
- * a PCI address in the scope of the definition. This address is
+ * a PCI address in the scope of the definition. This address is
* required to perform an access to PCI config space.
*
* MUTEX: Interpreter should be unlocked, because we may run the _REG
@@ -572,7 +569,7 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj,
if (ACPI_SUCCESS(status)) {
/*
* The _REG method is optional and there can be only one per region
- * definition. This will be executed when the handler is attached
+ * definition. This will be executed when the handler is attached
* or removed
*/
region_obj2->extra.method_REG = method_node;
@@ -670,10 +667,8 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj,
}
}
- /*
- * This node does not have the handler we need;
- * Pop up one level
- */
+ /* This node does not have the handler we need; Pop up one level */
+
node = acpi_ns_get_parent_node(node);
}
diff --git a/drivers/acpi/events/evsci.c b/drivers/acpi/events/evsci.c
index 2a8b778..b5fc805 100644
--- a/drivers/acpi/events/evsci.c
+++ b/drivers/acpi/events/evsci.c
@@ -115,10 +115,8 @@ u32 ACPI_SYSTEM_XFACE acpi_ev_gpe_xrupt_handler(void *context)
* if this interrupt handler is installed, ACPI is enabled.
*/
- /*
- * GPEs:
- * Check for and dispatch any GPEs that have occurred
- */
+ /* GPEs: Check for and dispatch any GPEs that have occurred */
+
interrupt_handled |= acpi_ev_gpe_detect(gpe_xrupt_list);
return_UINT32(interrupt_handled);
@@ -158,11 +156,11 @@ u32 acpi_ev_install_sci_handler(void)
* RETURN: E_OK if handler uninstalled OK, E_ERROR if handler was not
* installed to begin with
*
- * DESCRIPTION: Remove the SCI interrupt handler. No further SCIs will be
+ * DESCRIPTION: Remove the SCI interrupt handler. No further SCIs will be
* taken.
*
* Note: It doesn't seem important to disable all events or set the event
- * enable registers to their original values. The OS should disable
+ * enable registers to their original values. The OS should disable
* the SCI interrupt level when the handler is removed, so no more
* events will come in.
*
diff --git a/drivers/acpi/events/evxface.c b/drivers/acpi/events/evxface.c
index 94a6efe..a286787 100644
--- a/drivers/acpi/events/evxface.c
+++ b/drivers/acpi/events/evxface.c
@@ -267,7 +267,7 @@ acpi_install_notify_handler(acpi_handle device,
/*
* Root Object:
* Registering a notify handler on the root object indicates that the
- * caller wishes to receive notifications for all objects. Note that
+ * caller wishes to receive notifications for all objects. Note that
* only one <external> global handler can be regsitered (per notify type).
*/
if (device == ACPI_ROOT_OBJECT) {
diff --git a/drivers/acpi/events/evxfevnt.c b/drivers/acpi/events/evxfevnt.c
index 41554f7..669b8ca 100644
--- a/drivers/acpi/events/evxfevnt.c
+++ b/drivers/acpi/events/evxfevnt.c
@@ -161,8 +161,8 @@ acpi_status acpi_enable_event(u32 event, u32 flags)
}
/*
- * Enable the requested fixed event (by writing a one to the
- * enable register bit)
+ * Enable the requested fixed event (by writing a one to the enable
+ * register bit)
*/
status =
acpi_set_register(acpi_gbl_fixed_event_info[event].
@@ -343,8 +343,8 @@ acpi_status acpi_disable_event(u32 event, u32 flags)
}
/*
- * Disable the requested fixed event (by writing a zero to the
- * enable register bit)
+ * Disable the requested fixed event (by writing a zero to the enable
+ * register bit)
*/
status =
acpi_set_register(acpi_gbl_fixed_event_info[event].
@@ -396,8 +396,8 @@ acpi_status acpi_clear_event(u32 event)
}
/*
- * Clear the requested fixed event (By writing a one to the
- * status register bit)
+ * Clear the requested fixed event (By writing a one to the status
+ * register bit)
*/
status =
acpi_set_register(acpi_gbl_fixed_event_info[event].
--
1.5.6.6
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
